Products

Skip to results list
Showing 36 of 11641 results

Sort By

  • Pryda 450x100mm M10 Full Stirrup Post Anchor
    PRYDA

    Pryda 450x100mm M10 Full Stirrup Post Anchor

    • Full Stirrup Post Anchors are primarily used for bolting to existing concrete
    • Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
    • Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
    • Stems in stirrups are sealed for termite protection - AS1397-2001
    • Stirrup thickness = 4mm
  • Pryda 450x90mm M10 Full Stirrup Post Anchor
    PRYDA

    Pryda 450x90mm M10 Full Stirrup Post Anchor

    • Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
    • All joints are welded.
    • Stem - 25mm diameter x 2.0mm thickness
    • Stems in stirrups are sealed for termite protection - AS1397-2001
    • Stirrup thickness = 4mm
  • Pryda 600x90mm M10 Full Stirrup Post Anchor
    PRYDA

    Pryda 600x90mm M10 Full Stirrup Post Anchor

    • Pryda's Full Stirrup Post Anchors are primarily used for bolting to existing concrete. The U shape base is designed for maximum hold-down in concrete
    • Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
    • Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
    • Stems in stirrups are sealed for termite protection - AS1397-2001
    • Stirrup thickness = 4mm
  • Pryda 65mm M10 Half Stirrup Post Anchor
    PRYDA

    Pryda 65mm M10 Half Stirrup Post Anchor

    • Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
    • All joints are welded.
    • Stem - 25mm diameter x 2.0mm thickness
    • Stems in stirrups are sealed for termite protection - AS1397-2001
    • Stirrup thickness = 4mm
  • Pryda 65x90mm M10 Full Stirrup Post Anchor
    PRYDA

    Pryda 65x90mm M10 Full Stirrup Post Anchor

    • Full Stirrup Post Anchors are primarily used for bolting to existing concrete
    • Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
    • Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
    • Stems in stirrups are sealed for termite protection - AS1397-2001
    • Stirrup thickness = 4mm
  • Pryda 85mm Adjustable Post Anchor
    PRYDA

    Pryda 85mm Adjustable Post Anchor

    • Hot-dipped galvanised coating to provide long-term protection and suitable for severe external environments.
    • Suits post sizes from 90x90mm to 125x125mm
    • Designed and engineered to Australian National Construction Code (NCC)
    • Stems in stirrups are sealed for termite protection - AS1397-2001
    • Stirrup thickness = 4mm
  • Pryda 90mm M10 Bolt Down Post Anchor
    PRYDA

    Pryda 90mm M10 Bolt Down Post Anchor

    • Hot dip galvanised coating after manufacture and made from 4mm steel
    • Suitable for severe external environments
    • 10mm bolt holes for fixing with M10 bolts
  • Pryda 90mm M10 Bolt Down Post Anchor Black
    PRYDA

    Pryda 90mm M10 Bolt Down Post Anchor Black

    • Black finish over hot dipped galvanising for decorative finish
    • Used for locating posts onto existing concrete or decking
    • Adjustable washer to facilitate adjustment after bolt holes have been drilled.
  • Pryda 90mm M10 Bolt Down w Raised Mount Post Anchor
    PRYDA

    Pryda 90mm M10 Bolt Down w Raised Mount Post Anchor

    • Hot dip galvanised for excellent corrosion resistance Hot-dipped galvanised coating to provide long-term protection.
    • Manufactured from 4mm steel
    • 10mm bolt holes for fixing with M10 bolts
    • Suitable for severe external environments.
  • Pryda 90mm M10 Bolt Down w Washer Post Anchor
    PRYDA

    Pryda 90mm M10 Bolt Down w Washer Post Anchor

    • Hot-dipped galvanised coating to provide long-term protection.
    • Suitable for severe external environments.
    • Designed and engineered to Australian National Construction Code (NCC).
  • Pryda 90mm M10 Heavy Duty Bolt Down Post Anchor
    PRYDA

    Pryda 90mm M10 Heavy Duty Bolt Down Post Anchor

    • Hot dip galvanised for excellent corrosion resistance.
    • Manufactured from 5mm steel.
    • 10mm bolt holes for fixing with M10 bolts.
  • Pryda Compliance Tag - Suits M8 x 175mm FastFix Screws
    PRYDA

    Pryda Compliance Tag - Suits M8 x 175mm FastFix Screws

    • Tough weather proof design
    • Helps identify screw location and length
    • Complies with AS1684
  • Pryda Compliance Tag - To Suit M8 x 135mm FastFix Screws
    PRYDA

    Pryda Compliance Tag - To Suit M8 x 135mm FastFix Screws

    • Tough weather proof design
    • Helps identify screw location and length
    • Complies with AS1684
  • Pryda Corner Plate 110 x 60 x 30mm
    PRYDA

    Pryda Corner Plate 110 x 60 x 30mm

    • Use for right angle joints, carport, deck, fence or pergola construction
    • Suitable for use as either left or right hand and either the vertical or horizontal position
    • Galvanised bracket for right angle joints
    • The use of galvanised Pryda Timber Connector Nails 35 x 3.15mm is recommended
  • Pryda Foil Fix - Strip of 10
    PRYDA

    Pryda Foil Fix - Strip of 10

    • Foil fix can be used to fix foil insulation to both wall and roof frames.
    • Twisted nail profile allows ready penetration into and excellent holding power in all timbers, from the softest to the hardest.
    • Rounded and coined edges, and a wide size (21mm), greatly reduce the tendency of foil insulation to tear in windy conditions.
    • Supplied in easy snap-off sticks of 10 for fast, convenient and safe use on-site.
    • Made from Galvabond® sheet steel for high resistance to corrosion.
  • Pryda HDG Black Post Anchor 600 x 100mm Each
    PRYDA

    Pryda HDG Black Post Anchor 600 x 100mm Each

    • U Shape base is designed for maximum hold down in concrete
    • Black finish over hot dipped galvanising for decorative finish
    • Designed and engineered to Australian National Construction Code (NCC)
  • Pryda Joist Hanger - To Suit 35 x 120mm
    PRYDA

    Pryda Joist Hanger - To Suit 35 x 120mm

    • AS1684 & AS1720 compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 35 x 140mm
    PRYDA

    Pryda Joist Hanger - To Suit 35 x 140mm

    • AS1684 & AS1720 compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 35 x 90mm
    PRYDA

    Pryda Joist Hanger - To Suit 35 x 90mm

    • AS1684 & AS1720 compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 38 x 120mm
    PRYDA

    Pryda Joist Hanger - To Suit 38 x 120mm

    • AS1684 & AS1720 compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 38 x 140mm
    PRYDA

    Pryda Joist Hanger - To Suit 38 x 140mm

    • AS1684 & AS1720 compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 38 x 180mm
    PRYDA

    Pryda Joist Hanger - To Suit 38 x 180mm

    • AS1684 & AS1720 compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 38 x 90mm
    PRYDA

    Pryda Joist Hanger - To Suit 38 x 90mm

    • AS1684 & AS1720 compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 45 x 120mm
    PRYDA

    Pryda Joist Hanger - To Suit 45 x 120mm

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 45 x 140mm
    PRYDA

    Pryda Joist Hanger - To Suit 45 x 140mm

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 45 x 180mm
    PRYDA

    Pryda Joist Hanger - To Suit 45 x 180mm

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 45 x 220mm
    PRYDA

    Pryda Joist Hanger - To Suit 45 x 220mm

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 45 x 90mm
    PRYDA

    Pryda Joist Hanger - To Suit 45 x 90mm

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 50 x 140mm
    PRYDA

    Pryda Joist Hanger - To Suit 50 x 140mm

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 50 x 180mm
    PRYDA

    Pryda Joist Hanger - To Suit 50 x 180mm

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger - To Suit 50 x 90mm
    PRYDA

    Pryda Joist Hanger - To Suit 50 x 90mm

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws
  • Pryda Joist Hanger Suits 90 x 200mm
    PRYDA

    Pryda Joist Hanger Suits 90 x 200mm

    • Use for beam to beam connections, floor or roof trusses to support connections, right angle joints, carport, deck, gazebo, or pergola construction.
    • Strong, easy to install, cost effective, well designed connectors for many timber beam to beam joints.
    • Made from Galvabond® sheet steel for high resistance to corrosion in external applications.
    • Wide flanges for ease of nailing and drilling
  • Pryda Joist Strap 162mm
    PRYDA

    Pryda Joist Strap 162mm

    • Ideal for connecting timber
    • Made from Galvabond® sheet steel for high resistance to corrosion
    • Fixing battens or purlins to trusses or rafters
  • Pryda M10 300mm Centre Fix Post Anchor
    PRYDA

    Pryda M10 300mm Centre Fix Post Anchor

    • Conforms to AS3660.1 - 2000, Protection of Buildings from Termites
    • All joints are welded
    • Stem - 25mm diameter x 2.0mm thickness
    • Stems in stirrups are sealed for termite protection - AS1397-2001
    • Stirrup thickness = 4mm
  • Pryda M10 600 x 100mm Full Stirrup Post Anchor
    PRYDA

    Pryda M10 600 x 100mm Full Stirrup Post Anchor

    • Full Stirrup Post Anchors are primarily used for bolting to existing concrete
    • Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
    • Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
    • Stems in stirrups are sealed for termite protection - AS1397-2001
    • Stirrup thickness = 4mm
  • Pryda M8 x 135mm FastFix Stud To Wall Plate Screw - 50 Box
    PRYDA

    Pryda M8 x 135mm FastFix Stud To Wall Plate Screw - 50 Box

    • Stamped Screw Head - For easy identification and certification
    • Wide Thread - High resistance to withdrawal
    • Large Diameter Head - Superior hold down strength
    • Slotted Tip - For quicker start, reduced splitting & reduced driving force