Products

Ramset 5m Orange Plastic Spaghetti

Cut to length as required.
Light duty anchoring in concrete, stone, solid brick and solid block
For use with 3 - 3.5mm nails or 4.5 - 6 gauge screws

Ramset 5mm Hollow Wall Anchor - 4 Pack

Low profile head allows for low profile fixing
Large flange prevents the head from pulling into the substrate
Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity

Ramset 5mm x 5m White Wall Plugs Roll

Tapered at one end for quick and easy insertion
Economical roll
Suitable for 4.5 - 6 gauge screws

Ramset 6 x 100mm Countersunk DynaBolt Plus Masonry Anchor

Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
Countersunk head provides a neat flush finish.

Ramset 6 x 100mm DynaBolt Plus Flat Head Bolt - 2 Pack

Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
Countersunk head provides a neat finish, flush with the fixture surface

Ramset 6 x 100mm Galvanised AnkaScrew Masonry Anchor - 10 Pack

Patented WERCS thread reduces jamming making installation easier
New thread pitch increases clamping force for greater security
Lower thread height at the tip makes starting easier
100% removable
Ideal for close-to-edge or close-to-anchor installation

Ramset 6 x 100mm Galvanised AnkaScrew Masonry Anchor - 4 Pack

Patented WERCS thread reduces jamming making installation easier
New thread pitch increases clamping force for greater security
Lower thread height at the tip makes starting easier
100% removable
Ideal for close-to-edge or close-to-anchor installation

Ramset 6 x 100mm Galvanised Masonry Anchor AnkaScrew

Patented WERCS thread reduces jamming making installation easier
New thread pitch increases clamping force for greater security
Lower thread height at the tip makes starting easier
100% removable
Ideal for close-to-edge or close-to-anchor installation

Ramset 6 x 100mm Zinc AnkaScrew Masonry Anchor

Patented WERCS thread reduces jamming making installation easier
New thread pitch increases clamping force for greater security
Lower thread height at the tip makes starting easier
100% removable
Ideal for close-to-edge or close-to-anchor installation

Ramset 6 x 100mm Zinc AnkaScrew Masonry Anchor - 10 Pack

Patented WERCS thread reduces jamming making installation easier
New thread pitch increases clamping force for greater security
Lower thread height at the tip makes starting easier
100% removable
Ideal for close-to-edge or close-to-anchor installation

Ramset 6 x 100mm Zinc AnkaScrew Masonry Anchor - 4 Pack

Patented WERCS thread reduces jamming making installation easier
New thread pitch increases clamping force for greater security
Lower thread height at the tip makes starting easier
100% removable
Ideal for close-to-edge or close-to-anchor installation

Ramset 6 x 25mm Red Frame Wall Plugs - 25 Pack

Ramset™ wall plugs are tapered at one end for quick and easy insertion
Suitable for 8-9 gauge screws.
Ramset™ wall plugs are available in a neat and convenient frame pack.

Ramset 6 x 25mm Red Wall Plugs - 100 Bag

Ramset™ wall plugs are tapered at one end for quick and easy insertion
Suitable for 8-9 gauge screws
Ramset™ wall plugs are available in a handy polybag

Ramset 6 x 30mm Anchor RamPlug - 30 Pack

Anti-rotation barbs prevent the anchor from rotating in the hole
Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
Light duty
Suitable for use with 6 - 9 gauge screws

Ramset 6 x 30mm Nylon RamPlug Anchor - 12 Pack

Anti-rotation barbs prevent the anchor from rotating in the hole.
Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
Suitable for use with 6 - 9 gauge screws.

Ramset 6 x 30mm RamPlug - 100 Pack

Anti-rotation barbs prevent the anchor from rotating in the hole
Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
Light duty nylon anchor

Ramset 6 x 30mm ShureDrive Anchor - 100 Pack

Hammer-in method makes installation quick and easy.
Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange.
Once fully set, the ShureDrive™ becomes tamper resistant.
Large flange prevents pull-out.

Ramset 6 x 30mm ShureDrive Anchor - 4 Pack

Hammer-in method makes installation quick and easy
Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange
Once fully set, the ShureDrive™ becomes tamper resistant
Large flange prevents pull-out

Ramset 6 x 30mm Shuredrive Pack - 20 Pack

Hammer-in method makes installation quick and easy.
Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange.
Once fully set, the ShureDrive™ becomes tamper resistant.
Large flange prevents pull-out.

Ramset 6 x 34mm DynaBolt Plus Flat Head Bolt - 4 Pack

Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
Countersunk head provides a neat finish, flush with the fixture surface

Ramset 6 x 34mm Flat Head Dynabolt Plus Bolt

Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
Countersunk head provides a neat flush finish.

Ramset 6 x 35mm Red Frame Wall Plugs - 25 Pack

Ramset™ wall plugs are tapered at one end for quick and easy insertion
Suitable for 8-9 gauge screws.
Ramset™ wall plugs are available in a neat and convenient frame pack.

Ramset 6 x 35mm Red Wall Plugs - 100 Pack

Ramset™ wall plugs are tapered at one end for quick and easy insertion
Suitable for 8-9 gauge screws.
Ramset™ wall plugs are available in a handy polybag.

Ramset 6 x 38mm Universal Anchor - 100 Pack

Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
Strong holding power, up to 26kg into solid substrate and up to 7kg into hollow wall
Trusted Ramset quality

Ramset 6 x 38mm Universal Anchor - 40 Pack

Light duty fixing into brick, concrete or plasterboard
Box of 40
Supports up to 26kg in concrete and 7kg in plasterboard

Ramset 6 x 38mm Universal Anchor - 6 Pack

Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
Strong holding power, up to 26kg into solid substrate and up to 7kg into hollow wall
Trusted Ramset quality

Ramset 6 x 40mm DynaBolt Plus Hex Nut Bolt - 4 Pack

Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
Easy to use

Ramset 6 x 40mm Stainless Steel DynaBolt Plus Hex Nut Bolt - 2 Pack

Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
Easy to use