Drill Bits & Accessories
Sort Best selling
Showing 36 of 955 results
-
- Set includes: 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm, 8mm, 9mm and 10mm drill bits
- Suitable for drilling into metal, timber and plastic
- Titanium toughened
- Four cut design
- 135° split point
-
- Four-cut design for maximum material contact and faster drill speeds
- 135° split point for more precision
- Thicker, tapered core design
- Rapid eject flute
- Chamfered Edge
-
- Pack includes two 89mm PH2 Impact Driver bits
- Magnetised tips for enhanced fastener retention
- Custom engineered HYPERTORQUE™ torsion zone
- Custom Alloy Material, designed for high torque applications
- 1/4“ hex shank, suitable for drill drivers and impact drivers
-
- Industrial grade material for long life
- Flat blade design
- Suitable for bricks, blocks and concrete
- Compatible Only with SDS Plus rotary hammer drills
-
- 118° standard point for general purpose applications
- Precision ground flute designed for fast chip removal
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Blue surface finish for ferrous applications. The steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels
-
- 135° self centering point minimises wandering when starting and ideal for thin materials
- Flute length designed for shallow hole drilling no deeper than 1.25mm x diameter
- Double ended design increases drill life. Ensure that the chuck jaws are fully tightened
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- Breaker tip design for demolition effect providing up to 20% faster drilling speeds over previous generation bits
- New solid carbide head provides up to 50% better performance in reinforced concrete
- Patented rebar chamfering reduces bit jamming
- Centering tip ensures immediate spot drilling and prevents skidding
- Exclusive Kango design
-
- Thread: 1/2 UNF - Suits 14-30mm Holesaws
- Shank: 11/32 - Suits 10mm Chucks
- Suits Sutton Pilot Drills HSS1, HSS2, H1226006/6106/6206
-
- 4-Cut thin external tips for less friction
- Half-round spiral accelerates dust extraction away from tip. Square spiral combines compression channel with a depression chamber for perfectly controlled dust removal
- Sand-blasted Finish
-
- Made from heavy-duty steel
- Components: 3 - 6, 6 - 8, 8 - 11, 11 - 14, 14 - 18mm
- DIY to tradesperson
-
- Pack includes five 50mm Impact Driver Bits (HEX3, HEX4, HEX5, HEX6, HEX8)
- Magnetised tips for enhanced fastener retention
- Custom engineered HYPERTORQUE™ torsion zone
- Custom Alloy Material, designed for high torque applications
- 1/4“ hex shank, suitable for drill drivers and impact drivers
-
- Parallel Shank for rotary hammer and percussion drilling
- Double spiral flute provides greater dust extraction, extending drill life
- 2 cutting edged carbide percussion tip with semi positive profile for aggressive drilling in hard materials
- Brazed tip to ensure a perfect bond between tip and body
-
- Hardened S2 modified impact resistant steel, for extended life.
- Heat treated for maximum strength and durability.
- 6.35mm (1/4) Accessory fitment.
-
- Made from Bi-Metal Cobalt HSS for toughness and longer life
- 32mm cutting depth
- Varied pitched cutting teeth reduces vibration for cleaner finish and greater accuracy
-
- Four cutting edges function evenly and do not seize up on reinforcing steel
- One-piece, solid carbide tip and patented reinforcing chamfering ensure low vibrations and the optimum drilling performance when drilling into steel
- Lateral support and the maximum possible area of the interface between the carbide and steel body compensate for torsion forces
- Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance
- High-volume flute geometry ensures the optimum removal of drilling dust
-
- Suitable for general demolition and surface cleaning of concrete and masonry
- Straight blade design for maximum impact
- Only compatible with SDS Plus rotary hammer drills
-
- 118° Split point - Minimises wandering when starting
- 5% Cobalt Content - Universal material for heat and wear resistance
- Up to 2 × tool life versus standard Viper drills
-
- Quick-change chuck accepts standard 1/4″ hex shank bits
- Heavy duty all metal housing and steel gears with ball bearing construction
- Rated up to 500 in-lbs. of torque with 2000 RPM
- Gripped Stabiliser arm for greater control, with two-piece screwdriver bits storage
- Made from Tool Steel, hardened for long life
-
- 4-Cut thin external tips for less friction
- Half-round spiral accelerates dust extraction away from tip. Square spiral combines compression channel with a depression chamber for perfectly controlled dust removal
- Sand-blasted Finish
-
- 4-Cut thin external tips for less friction
- Half-round spiral accelerates dust extraction away from tip. Square spiral combines compression channel with a depression chamber for perfectly controlled dust remov
- Sand-blasted Finish
-
- Viper point design is 2 times faster, out-performing conventional drill bits
- 118° Split point (drills >3.5mm & 9/64") minimises wandering when starting
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
-
- Reduces torque and friction
- Improves surface finish
- Accurate thread quality
- Reduced friction for extremely high quality surface finish
-
- 118° standard point for general purpose applications
- Precision engineered parallel shank for accurate hole size
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- Common Length 6" (152mm) overall length with a 3-3/8" (86mm) flute length
- Reduced shanks suit 13mm drill chucks
- 118° standard point for general purpose applications
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Blue surface finish for ferrous applications. The steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels
-
- Set includes: 1 x #6, 1 x #8, 1 x #10, and 1 x #12 gauge Countersink Drill Bits, Hex Key
- Creates countersunk holes for recess fasteners e.g flat-head screws
- 118° split point stays sharp and produces clean holes
- ¼” hex shank, suitable for drill drivers
-
- 118° standard point for general purpose applications
- Precision engineered parallel shank for accurate hole size
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- Viper Point Design - Delivers up to 2X faster drilling speeds versus conventional HSS drill bits
- 118° Split Point (>3.5mm & 9/64") - Minimises wandering when starting
- Made from European M2 High Speed Steel (HSS) - Offers the best combination of strength, heat & wear resistance
- Bright Finish - For general purpose applications, non-ferrous metals & plastics
-
- Tungsten Carbide Tipped- Cuts 5 times faster than conventional bi-metal holesaws in timber
- Deep cut-outs for swift and easy core ejection
- International Thread Pattern Accepts all standard arbors
-
- Set includes: 6 x HyperTorque™ PH2 50mm Impact Rated Driving Bits, 2 x HEX5 50mm Impact Rated Driving Bits, 2 x SQ2 50mm Impact Rated Driving Bits, Carabiner and Easy Bit Access Bit Holder
- HyperTorque torsion zone absorbs extreme torque peaks
- Magnetised tips assist with fastener retention
- Custom alloy provides optimum blend of hardness and elasticity
- ¼” hex shank suitable for suitable for impact drivers and drill drivers
-
- Breaker tip design for demolition effect providing up to 20% faster drilling speeds over previous generation bits.
- New solid carbide head provides up to 50% better performance in reinforced concrete.
- Patented rebar chamfering reduces bit jamming
- Centering tip ensures immediate spot drilling and prevents skidding
- Exclusive Kango design
-
- Flex Tech torsion zone – Absorbs high torque stress and reduces bit fracture.
- CNC Magnetic tips – For supreme grip.
- Hardened S2 modified impact resistant steel – For extended life.
- 6.35mm (1/4”) -- Accessory fitments.
-
- 4-Cut thin external tips for less friction
- Half-round spiral accelerates dust extraction away from tip. Square spiral combines compression channel with a depression chamber for perfectly controlled dust removal
- Sand-blasted Finish
-
- Four cutting edges function evenly and do not seize up on reinforcing steel
- One-piece, solid carbide tip and patented reinforcing chamfering ensure low vibrations and the optimum drilling performance when drilling into steel
- Lateral support and the maximum possible area of the interface between the carbide and steel body compensate for torsion forces
- Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance
- High-volume flute geometry ensures the optimum removal of drilling dust
-
- 118° standard point for general purpose applications
- Precision ground flute designed for fast chip removal
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Blue surface finish for ferrous applications. The steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels
-
- Parallel Shank for rotary hammer and percussion drilling
- Double spiral flute provides greater dust extraction, extending drill life
- 2 cutting edged carbide percussion tip with semi positive profile for aggressive drilling in hard materials
- Brazed tip to ensure a perfect bond between tip and body
