Drill Bits & Accessories
Sort Best selling
Showing 36 of 955 results
-
- Brick, masonry & concrete
- Brazed tip
- Hammer drilling
- Parallel shank
-
- Viper point design is 2 times faster, out-performing conventional drill bits
- 118° Split point (drills >3.5mm & 9/64") minimises wandering when starting
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
-
- 135° self centering point minimises wandering when starting and ideal for thin materials
- Flute length designed for shallow hole drilling no deeper than 1.25mm x diameter
- Double ended design increases drill life. Ensure that the chuck jaws are fully tightened
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- Durable carbide tip, for prolonged life in masonry drilling applications
- Sharpened edges, provide faster, cleaner holes
- Precision start tip, reduces bit wandering
- High-volume flute, removes dust and debris efficiently
- ¼” hex shank, Compatible with hammer drills, drill drivers and impact drivers
-
- Viper point design is 2 times faster, out-performing conventional drill bits
- 118° Split point (drills >3.5mm & 9/64") minimises wandering when starting
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
-
- For use in metal, wood and plastic
- Made from high speed steel
- Wide flute to eliminate dogging
- Easily resharpened
-
- Works extremely well in all hardwoods and softwoods
- Has a bearing-stop collar which eliminates countersinking too deep
- Gives every countersink exactly the same depth, for a professional finish
-
- Viper point design is 2 times faster, out-performing conventional drill bits
- 118° Split point (drills >3.5mm & 9/64") minimises wandering when starting
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
-
- 135° split point for more precision
- Thicker, tapered core design
- Rapid eject flute
- Chamfered Edge
-
- Viper point design is 2 times faster, out-performing conventional drill bits
- 118° Split point (drills >3.5mm & 9/64") minimises wandering when starting
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
-
- Suitable for drilling into stainless steel, hard metal, wood and plastic
- Four-cut design for maximum material contact and faster drill speeds
- 135° split point for more precision
- M35 5% Cobalt Blend
- 3 flat shank (≤4.5mm w.o 3)
-
- Cobalt High Speed Steel – Ensures high abrasion and heat resistance
- 135˚ Split Point – Minimises wandering when starting
- 1/4” Hex Shank – Suitable for use with impact drivers
-
- Suitable for drilling countersink holes in fibre cement boards, cladding and cement sheet up to 9mm thick
- Pre-drills holes for 10G recess fibre cement screws
- ¼” hex shank
-
- Suitable for drilling into metal, timber and plastic
- Extra-long flute length for deep penetration
- Rapid eject flute promotes faster, more efficient drilling
- Chamfered edges produce faster, cleaner holes
- Available in sizes 3-12mm
-
- Parallel Shank for rotary hammer and percussion drilling
- Double spiral flute provides greater dust extraction, extending drill life
- 2 cutting edged carbide percussion tip with semi positive profile for aggressive drilling in hard materials
- Brazed tip to ensure a perfect bond between tip and body
-
- Ideal for finer applications such as a clear coat
- Fits any 125MM (5") Hook & Loop backing pad
- Josco foam pads have a centre relief to dissipate heat and deliver a more even finish
-
- 118° Split point - Minimises wandering when starting
- 5% Cobalt Content - Universal material for heat and wear resistance
- Up to 2 × tool life versus standard Viper drills
-
- Suitable for drilling into metal, wood and plastic
- Four-cut design for maximum material contact and faster drill speeds
- 135° split point for more precision
- Thicker, tapered core design
- Rapid eject flute
-
- Tap made from Tungsten Chrome Alloy
- Square shank tap for hard threading work in a variety of materials
- Straight flutes suitable for through hole tapping
- 135° Self-Centering split point drill minimises wandering when starting
- Drill made from high speed steel with Titanium Nitride tip for 3x longer life
-
- Breaker tip design for demolition effect providing up to 20% faster drilling speeds over previous generation bits.
- New solid carbide head provides up to 50% better performance in reinforced concrete.
- Patented rebar chamfering reduces bit jamming
- Centering tip ensures immediate spot drilling and prevents skidding
- Exclusive Kango design
-
- Durable carbide tip, for multi-material drilling and extended bit life
- Sharpened edges, provide faster, cleaner holes
- Precision start tip, reduces bit wandering
- High-volume flute, removes dust and debris efficiently
- ¼” hex shank, Compatible with drill drivers, hammer drills and impact drivers
-
- Viper Point Design - Delivers up to 2X faster drilling speeds
- 118° Split Point (>3.5mm & 9/64") For general purpose applications.
- Made from European M2 High Speed Steel (HSS)
-
- Viper point design is 2 times faster, out-performing conventional drill bits
- 118° Split point (drills >3.5mm & 9/64") minimises wandering when starting
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
-
- Durable carbide tip, for prolonged life in masonry drilling applications
- Sharpened edges, provide faster, cleaner holes
- Precision start tip, reduces bit wandering
- High-volume flute, removes dust and debris efficiently
- ¼” hex shank, Compatible with hammer drills, drill drivers and impact drivers
-
- 135° self centering point minimises wandering when starting and ideal for thin materials
- Flute length designed for shallow hole drilling no deeper than 1.25mm x diameter
- Double ended design increases drill life. Ensure that the chuck jaws are fully tightened
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- Pack includes two 50mm SQ2 Impact Driver bits
- Magnetised tips for enhanced fastener retention
- Custom engineered HYPERTORQUE torsion zone
- Custom Alloy Material, designed for high torque applications
- 1/4“ hex shank, suitable for drill drivers and impact drivers
-
- Durable carbide tip, for multi-material drilling and extended bit life
- Sharpened edges, provide faster, cleaner holes
- Precision start tip, reduces bit wandering
- High-volume flute, removes dust and debris efficiently
- ¼” hex shank, Compatible with drill drivers, hammer drills and impact drivers
-
- Suitable for drilling into metal, wood and plastic
- Four-cut design for maximum material contact and faster drill speeds
- 135° split point for more precision
- Thicker, tapered core design
- Rapid eject flute
-
- High Quality Carbide - For 10x longer life than standard glass and tile drills
- Multi-Faceted Spear Point - For improved penetration
- Anti-Slip Hex Shank - For positive grip in chuck
-
- Brick, masonry & concrete
- Brazed tip
- Hammer drilling
- Parallel shank
-
- 118° standard point for general purpose applications
- Precision engineered parallel shank for accurate hole size
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- 118° standard point for general purpose applications
- Precision ground flute designed for fast chip removal
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Blue surface finish for ferrous applications. The steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels
-
- 118° Split point - Minimises wandering when starting
- 5% Cobalt Content - Universal material for heat and wear resistance
- Up to 2 × tool life versus standard Viper drills
-
- Ideal for coarser applications such as cutting
- Fits any 125mm (5") Hook & Loop backing pad
- Josco foam pads have a centre relief to dissipate heat and deliver a more even finish
-
- Round Shank
- 135º Split point
- Sharpened Edge
- M2 HSS
