EG All Products - DO NOT EDIT

  • Please do not edit this collection, as the discount logic requires this to be configured as EG creates it.
  • Veuillez ne pas modifier cette collection, car la logique de remise exige qu’elle soit configurée telle que créée par EG.
  • Bitte bearbeiten Sie diese Kollektion nicht, da die Rabattlogik erfordert, dass sie so konfiguriert bleibt, wie sie von EG erstellt wurde.
  • No edite esta colección, ya que la lógica de descuento requiere que esté configurada tal como la crea EG.
  • Non modificare questa collezione, perché la logica dello sconto richiede che rimanga configurata così come viene creata da EG.
  • Não edite esta coleção, pois a lógica de desconto exige que ela seja configurada exatamente como criada pela EG.
  • Bewerk deze collectie niet, omdat de kortingslogica vereist dat deze zo blijft zoals EG deze aanmaakt.
  • このコレクションは編集しないでください。割引ロジックの都合上、EG が作成した状態のままにしておく必要があります。
  • 请不要编辑此系列,因为折扣逻辑要求其保持由 EG 创建时的配置。
  • 請不要編輯此系列,因為折扣邏輯要求其保持 EG 建立時的設定。
  • 이 컬렉션은 EG가 생성한 구성 그대로 유지해야 하므로 수정하지 마십시오.
EG All Products - DO NOT EDIT
Skip to results list
Showing 36 of 11935 results
Column grid

Sort By

    • Heat treated carbon steel construction
    • Hardened jaws for longevity
    • Knurled metal handle for positive grip

    FJD $80.58

    • Ideal for connecting timber
    • Made from Galvabond® sheet steel for high resistance to corrosion
    • Fixing battens or purlins to trusses or rafters

    FJD $0.67

    • Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
    • Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
    • Countersunk head provides a neat flush finish.

    FJD $2.57

    • Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
    • Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
    • Countersunk head provides a neat flush finish

    FJD $2.95

    • Thread Diameter Metric M12
    • Galvanised
    • Thread pitch: 1.75mm
    • Complies to Australian standard AS1275

    FJD $4.43

    • Easy to fit and time saving
    • No chiselling required
    • Fixed pin used for home security (i.e. entrance doors)
    • Polished stainless steel
    • 304 grade stainless steel for outstanding corrosion resistance. Recommended for external and wet room application

    FJD $32.22

    • Recessed into door and jam
    • Fixed pin used for home security (i.e. entrance doors)
    • Prime coat to facilitate with painting

    FJD $2.57

    • The simple, bucket design ensures you collect all of your rainwater., Stainless steel mesh screen filters out leaves and debris.,
    • The bucket design means water flows through the mesh and downpipe without splashing.
    • Keep mosquitoes and pests out of your rainwater system.,

    FJD $32.26

    • Round head
    • Stainless steel 304
    • Pack of 8
    • Includes Torx® driver bit
    • Thread pitch: 1mm

    FJD $9.91

    • Patented WERCS thread reduces jamming making installation easier
    • New thread pitch increases clamping force for greater security
    • Lower thread height at the tip makes starting easier
    • 100% removable
    • Ideal for close-to-edge or close-to-anchor installation

    FJD $3.76

    • Use for repair or reinforcement, timber jointing or wall frame to frame connections.
    • No special pressing equipment is necessary for installation.
    • Made from Galvabond® sheet steel for high resistance to corrosion.

    FJD $5.67

    • Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
    • Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
    • Unique "pull-down" section

    FJD $6.92

    • Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
    • Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
    • Features unique "pull-down" section

    FJD $1.21

    • Patented WERCS thread reduces jamming making installation easier
    • New thread pitch increases clamping force for greater security
    • Lower thread height at the tip makes starting easier
    • 100% removable
    • Ideal for close-to-edge or close-to-anchor installation

    FJD $5.01

    • Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
    • Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
    • Countersunk head provides a neat flush finish

    FJD $2.76

    • Easy to fit and time saving
    • No chiselling required
    • Loose pin used for internal doors that can be removed for ease of fitting or later maintenance of the door (i.e. painting)
    • Polished stainless steel
    • 304 grade stainless steel for outstanding corrosion resistance.

    FJD $46.29

    • Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
    • Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
    • Countersunk head provides a neat flush finish

    FJD $2.39

    • Cleans 4 times faster – The Classic Patio cleaner is a high efficiency pressure washer accessory that is suitable for large surface areas.
    • For patio cleaning – Ideal for cleaning horizontal surfaces such as patios and paths with no splash back.
    • Genuine Gerni accessory – Suitable for use with all Gerni machines with a pressure rating up to 1885 psi.
    • G-Connect accessory fitment – With Gerni’s large range of accessories featuring the quick and easy G-Connect system, you can connect the required accessory with a simple twist or click.

    FJD $68.08

    • Patented WERCS thread reduces jamming making installation easier
    • New thread pitch increases clamping force for greater security
    • Lower thread height at the tip makes starting easier
    • 100% removable
    • Ideal for close-to-edge or close-to-anchor installation

    FJD $3.95

    • Patented 'pull-down' expansion sleeve closes gaps of up to 5mm providing enhanced security
    • Fully assembled 'through fixture' anchor eliminates marking out and re-positioning of fixtures
    • Trusted Ramset quality

    FJD $3.36

    • Patented WERCS thread reduces jamming making installation easier
    • New thread pitch increases clamping force for greater security
    • Lower thread height at the tip makes starting easier
    • 100% removable
    • Ideal for close-to-edge or close-to-anchor installation

    FJD $4.16

    • Made in Australia
    • Fits over most household garden taps
    • Strong but lightweight
    • Hand grip for carrying
    • Use for hoses, electrical cords or rope

    FJD $4.75

    • Light weight
    • Suitable for all paints
    • For use with rollers up to 160mm

    FJD $5.07

    • Recessed into door and jam
    • Brass jacket pin for noise control and corrosion resistance
    • Fixed pin used for home security
    • Zinc plated coating for moderate corrosion resistance. Recommended for internal use

    FJD $5.88

    • Patented WERCS thread reduces jamming making installation easier
    • New thread pitch increases clamping force for greater security
    • Lower thread height at the tip makes starting easier
    • 100% removable
    • Ideal for close-to-edge or close-to-anchor installation

    FJD $4.24

    • 40% Lighter than Uni-Pro metal frame Pro Masker
    • Pistol grip handle provides comfort and control during application
    • 175mm (7") Stainless steel cutting blade adjusts and locks with a single set screw
    • Combines masking paper/masking film and masking tape to be applied to any surface

    FJD $91.13

    • Patented WERCS thread reduces jamming making installation easier
    • New thread pitch increases clamping force for greater security
    • Lower thread height at the tip makes starting easier
    • 100% removable
    • Ideal for close-to-edge or close-to-anchor installation

    FJD $3.62

    • Recessed into door and jam
    • Fixed Pin used for external doors for home security (i.e. entrance doors)
    • Polished stainless steel

    FJD $16.21

    • Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
    • Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
    • unique "pull-down" section

    FJD $1.88

    • Unique Nail Spikes – holds the hanger in position while you hammer!
    • Meets and exceeds Australian Standard AS1720
    • 316 Stainless Steel – durable, corrosion resistant, and suitable for use in coastal or high corrosion environments
    • Australian Made - High quality, peace of mind, and supporting Aussie jobs

    FJD $12.72

    • Ramset™ wall plugs are tapered at one end for quick and easy insertion
    • Suitable for 8-9 gauge screws.
    • Ramset™ wall plugs are available in a neat and convenient frame pack.

    FJD $3.99

    • AS1684 & AS1720 Compliant
    • The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
    • Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
    • Can be fastened using Pryda Nails or Pryda 35mm Screws

    FJD $5.13

    • Easy installation with all hardware included
    • Decorative and stylish design
    • Doubles as a door catch to hold your doors open
    • Prevents doors and handles damaging walls

    FJD $13.63

    • Recessed into door and jamb
    • Fixed pin used for external doors for home security (i.e. entrance doors)
    • 304 grade stainless steel for outstanding corrosion resistance
    • Polished stainless steel

    FJD $13.17

    • Designed for maximum performance in a variety of cutting applications with a 33% longer cutter top plate for increased cutting life
    • Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and allow for fewer chain adjustments
    • Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance
    • Pitch: 3/8" Low Profile, Gauge: .050", Drive Links: 52
    • For saw sizes up to 42 cc

    FJD $75.32

    • Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
    • Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
    • Unique "pull-down" section

    FJD $2.39