EG All Products - DO NOT EDIT

  • Please do not edit this collection, as the discount logic requires this to be configured as EG creates it.
  • Veuillez ne pas modifier cette collection, car la logique de remise exige qu’elle soit configurée telle que créée par EG.
  • Bitte bearbeiten Sie diese Kollektion nicht, da die Rabattlogik erfordert, dass sie so konfiguriert bleibt, wie sie von EG erstellt wurde.
  • No edite esta colección, ya que la lógica de descuento requiere que esté configurada tal como la crea EG.
  • Non modificare questa collezione, perché la logica dello sconto richiede che rimanga configurata così come viene creata da EG.
  • Não edite esta coleção, pois a lógica de desconto exige que ela seja configurada exatamente como criada pela EG.
  • Bewerk deze collectie niet, omdat de kortingslogica vereist dat deze zo blijft zoals EG deze aanmaakt.
  • このコレクションは編集しないでください。割引ロジックの都合上、EG が作成した状態のままにしておく必要があります。
  • 请不要编辑此系列,因为折扣逻辑要求其保持由 EG 创建时的配置。
  • 請不要編輯此系列,因為折扣邏輯要求其保持 EG 建立時的設定。
  • 이 컬렉션은 EG가 생성한 구성 그대로 유지해야 하므로 수정하지 마십시오.
EG All Products - DO NOT EDIT
Skip to results list
Showing 36 of 14378 results
Column grid

Sort By

    • Sharp carbon steel tri-cut teeth
    • Foldable for safety and storage
    • Cuts on both push and pull stroke
    • Cutting capacity 30-40mm
    • Lifetime guarantee

    FJD $35.43

    • Pack includes two 152mm PH2 Impact Driver bits
    • Magnetised tips for enhanced fastener retention
    • Custom engineered HYPERTORQUE™ torsion zone
    • Custom Alloy Material, designed for high torque applications
    • 1/4“ hex shank, suitable for drill drivers and impact drivers

    FJD $17.03

    • Over 2x Faster*
    • Pyramid Point®
    • Serrated Sharp Thread

    FJD $34.79

    • Clip on technology
    • Bifold corner door application
    • Made in Italy
    • 200,000 test cycles
    • 3D adjustment

    FJD $45.63

    • Ergonomic grip reduces user fatigue during extended use
    • Magnetic hook provides extra convenience when working with metal (e.g. steel studs)
    • Up to 3m standout for extra reach and convenience when working alone
    • Double-sided easy-read blade shows clear measurements from any direction
    • Nylon-fused blade shield prevents tearing and protects the markings from abrasion

    FJD $43.47

    • Interchangeable triangular shaped or sheet base pads for different applications
    • Fold out finger pad for fine detail or corner areas
    • Fit quick fix hook and loop or clamp paper to pad base
    • DustTech integrated dust technology system for maximum pick up efficiency
    • Nylon bag for convenient storage included

    FJD $129.01

    • Solid aluminium extruded square will not bend or break
    • Stamped conversion tables
    • Mark or cut boards up to 178mm wide
    • Thicker frame design ensures safe use as a saw guide
    • Mark any angle from 0 to 90 degrees quickly

    FJD $36.23

    • New blue Spi-weave fabric
    • Excellent pick-up and release
    • Greater coverage*
    • Open weave design
    • Flat & low sheen finish

    FJD $57.91

    • Individually switched for extra control
    • Child safety socket shutters
    • 175J surge protection
    • Safety overload protection
    • Concealed hanging slots

    FJD $32.61

    • The pole is 1.2m in length
    • The pole is made of wood
    • Metal, universal threaded tip, works with most tools
    • Lightweight and durable

    FJD $8.69

    • Viper Point Design - Delivers up to 2X faster drilling speeds versus conventional HSS drill bits
    • 118° Split Point (>3.5mm & 9/64") - Minimises wandering when starting
    • Made from European M2 High Speed Steel (HSS) - Offers the best combination of strength, heat & wear resistance
    • Bright Finish - For general purpose applications, non-ferrous metals & plastics

    FJD $167.45

    • Soft rubber handle to provide a comfortable grip
    • Stainless steel ferrule - no rusting, long life
    • Easy to clean synthetic filament
    • Suitable for all paint types

    FJD $26.68

    • 160mm
    • 10mm Nap microfibre mini roller in a great value painting pack
    • This great value painting pack includes 1 paint tray, 1 x 160mm mini roller frame, and 2 x 160mm (10mm Nab) microfibre mini rollers
    • Easily attach to standard paint poles to reach high areas
    • Easy-to-clean tray

    FJD $18.26

    • Offset blades keep hands clear of metal while cutting straight lines and right and left arcs
    • Blade serrations hold material firmly and spread cutting force uniformly across blade edge, improving cut quality and tool life
    • Cuts up to 18 gauge low carbon, rolled steel
    • Spring-action handle for a faster, effortless feed
    • Made in the USA

    FJD $65.15

    • MaxView design, robust base plate, low vibration design, and cut guide ensures maximum cutting accuracy
    • Tool-less blade change
    • Base adjusts from 0 to 45 degree right or left for angled cuts
    • Inbuilt dust blower ensures a clear view of the cutting line / Connect dust port with dust extraction system for added convenience
    • Flush cut capability allows cutting up to vertical surface

    FJD $114.52

    • 12PT dynamic drive
    • 1/4' & 1/2" MM / AF
    • Comfortable grip of spanners from the U-shaped handle
    • Matte finish
    • High-performance alloy steel

    FJD $473.96

    • Cuts multiple materials
    • Special bond formulation
    • Convenient and versatile
    • Handy box of 25

    FJD $72.47

    • Full length magnetic strip protects from insects
    • Hands-free operation
    • UV stable polyester mesh allows refreshing breezes
    • Easy DIY hook and loop installation

    FJD $27.39

    • 900J very high surge protection helps prevent damage to connected tools and appliances caused by inconsistencies in power supply
    • 3m lead with extra reach to get power where needed
    • Mains switch
    • Hanging hook allows the powerboard to be positioned where needed
    • Protective finish to help withstand damage

    FJD $45.97

    • Faster & easier to install than standard treated pine fasteners for improved on-site productivity.
    • No pre-drilling. Fast Bite Point for a quick start.
    • Serrated Cutting Ribs for self-countersinking and a clean flush finish.

    FJD $118.65

    • Our Tap 'N' Snap taps all feature a built-in hose adaptor which suits most hose connections.
    • Made from quality brass for added durability, this garden tap suits 13mm (1/2") connections, and features a quarter turn lever handle.
    • Achieve full flow with a quarter turn.
    • Lead-Free WaterMark approved.

    FJD $36.74

    • To get the maximum data rate transfer whole channel should be compatible for 10Gbps
    • RJ45 connectors with gold plated contacts
    • 24AWG copper conductors, unshielded twisted pair cable
    • Low smoke zero halogen cable jacket
    • Compliant to AS/CA S008:2020 and ISO 11801 standards

    FJD $20.28

    • Flexible double neoprene blade moulds to the shape of the floor and gets into lower areas of grout to clean uneven surfaces, like tiles
    • Quick drying leaving floors hygienically clean
    • Sanitary neoprene blade

    FJD $47.82

    • Gold Passivation for internal use.
    • Bugle head for a flush surface finish.
    • 5mm Hexagonal drive head and T17 Drill Point for high-torque fastening.
    • Knurling to increase drive speed and reduce torque required to drive batten screw into timber.

    FJD $30.95

    • Cordless design is easy to use, perfect for quick repairs and crafts
    • LED indicator light to show when the glue gun is charging and warming
    • Charging dock with drip tray for your convenience

    FJD $85.53

    • 18 Stainless steel tank
    • Wet and dry vacuuming
    • Lightweight and portable
    • 1.5m hose and premium extension tubes
    • Crevice, brush and floor tool included

    FJD $144.92

    • Waterproof - works underwater
    • Indoor/Outdoor use
    • Instantly seals out water, air and moisture
    • Permanent bond
    • Great for roofing, gutters, RV/Campers, PVC, pool liners, pool covers, windows, DIY Projects and more!

    FJD $52.76

    • Titanium treated cutting blade
    • Lightweight aluminium telescopic handles
    • Ratchet action for increased cutting power
    • Cutting capacity 38mm
    • Lifetime guarantee

    FJD $66.57

    • Adjustable depth of cut from 0mm to 3mm.
    • Durable steel planing base with integrated chamfering groove
    • Dual left or right chip exhaust (dust bag included)
    • Rear mounted “kickstand” protects
    • Side fence and 2 blades included

    FJD $172.49

    • Brass Snap on Adaptor
    • Suits 12mm fittings
    • 360 degree movement

    FJD $37.25

    • 8 x 10A Power outlet with master switch
    • 2 USB-A & 2 USB-C Charger total 5V d.c. 4.5A max
    • Surge Protection

    FJD $28.91

    • Faster & easier to install than standard treated pine fasteners for improved on-site productivity.
    • No pre-drilling. Fast Bite Point for a quick start.
    • Serrated Cutting Ribs for self-countersinking and a clean flush finish.

    FJD $28.24

    • Fibreglass handle prevents splinters
    • Non-marking white head
    • Rubber grip for extra support and comfort

    FJD $11.56

    • Hot and cold breech plug
    • Polypropylene
    • 1/2 inch BSP end cap

    FJD $3.13

    • Good corrosion protection
    • Used for non-structural work
    • For external use

    FJD $36.93

    • Operating Temperature 0 to 80
    • Operating Pressure 300PSI/2.1MPA
    • 10 Year Guarantee

    FJD $113.64