Fasteners & Fixings
Sort Best selling
Showing 36 of 2490 results
-
- Low profile head allows for low profile fixing
- Large flange prevents the head from pulling into the substrate
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity
-
- Designed specifically for Decking applications
- Countersunk Trim head with nibs for flush finish
- Weather Force corrossion protection
- # 2 Square Drive (Bit included) with Type 17 Point for quick clean installation
- Suitable for Softwood and ACQ Treated Timbers
-
- Self-drilling tip for use in aluminium – not designed for steel
- Undercut countersunk head designed to sit flush or slightly below the surface
- Corrosion resistant 304 grade stainless steel
-
- Suitable for installing non-structural pieces including trim, casing, panelling and moulding
- Electro-galvanised coating provides corrosion resistance and increased durability
- 18 gauge size
- 1.25mm head width, 15mm length
- Made from carbon steel
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Engineered with marine-grade 316 stainless steel, offering exceptional protection against corrosion in harsh and coastal applications.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
- Manufactured with high-grade materials for maximum corrosion protection, making it ideal for use in coastal and marine environments.
-
- Suitable for installing non-structural pieces including trim, casing, panelling and moulding
- Electro-galvanised coating provides corrosion resistance and increased durability
- 18 gauge size
- 1.25mm head width, 25mm length
- Made from carbon steel
-
- Superior vibration resistance and clamping force
- Ideal for most sheet metal fabrications
- Excellent tolerance to corrosion
- 316 Grade stainless steel body and mandrel
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Top Grip provides a positive seal and reduces the roof sheet riding down
- Thread-to-point technology for faster starting, no skidding and stable installation
- Vortex Point for fastening to timber or metal up to 1.5mm
-
- Hot dip galvanised coating after manufacture and made from 4mm steel
- Suitable for severe external environments
- 10mm bolt holes for fixing with M10 bolts
-
- Suitable for installing non-structural pieces including trim, casing, panelling and moulding
- Electro-galvanised coating provides corrosion resistance and increased durability
- 18 gauge size
- 1.25mm head width
- Made from carbon steel
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Hot dipped galvanised 4mm steel
- All joints are welded
- Conforms to AS3660.1 – 2000, Protection of Buildings from Termites
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- 34° angle
- 90mm x 3.15mm
- Bright Steel
- Smooth shank & Diamond point
- Box of 1000 nails
-
- Diameter: 18 Gauge / 1.25mm
- Angle: 0°
- Electro galvanized
- Chisel point to reduce timber splitting
-
- Designed specifically for Decking applications
- Countersunk Wide head providing strong hold and flush finish
- 304 Stainless Steel
- T25 Drive (Bit included) with Type 17 Point for quick clean installation
- Suitabel for both Soft and Hardwood varieties
-
- Galvanised Class 3: Suitable for external use
- Bugle head ensures a flush surface finish
- 5mm hexagonal drive head and T17 drill point designed for high-torque fastening
- Knurling reduces timber splitting and reduces torque required to drive the screw into timber.
- Under head rib design improves drive efficiency and countersinking into timber
-
- FibreTEKS® tip combines drilling and tapping action for smooth penetration through fibre cement and light steel.
- Class 4 galvanisation corrosion protection is ideal for applications exposed to weather or coastal conditions.
- The underhead cutter breaks up cement for a flush finish.
-
- Type 17 point features a cutting flute for fast, clean starts in timber, reducing the risk of splitting.
- This 12G screw is approximately 5.5mm in diameter and 65mm in length.
- The hex head design allows higher torque transfer
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Engineered with marine-grade 316 stainless steel, offering exceptional protection against corrosion in harsh and coastal applications.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through.
-
- Zinc plated body
- Steel
- Safety catch
- Heavy Duty
-
- Steel
- Padlockable
- Zinc Plated
- Light Weight
-
- Steel
- Padlockable
- Easy to install
-
- Steel
- Electronically Galvanised
- Safety catch
- Nyloc bushing
-
- Simple open and close action
- Corrosion resistant
- Easy to install
- Adjustable catch length
-
- Stainless Steel
- Catch plate included
- Polished finish
-
This over centre fastener is also known as a toggle latch. Suitable for light duty applications. Ideal uses include cabinets, drawers, tool boxes and chests. Very versatile, easy to install and Zinc Plated for weather resistance. Both Catch plate and latch included.
