Hose Connectors & Tap Adaptors
Sort Best selling
Showing 36 of 44 results
-
- GARDENA angled swivel tap connector suits 1" and 3/4" taps and 13mm hose connectors
- Quick and easy tool-free hose tap connector
- UV stabilised to withstand Australian conditions
- Made in Germany and comes with a 5-year warranty
-
- 360 degree rotation and 180 degree swivel to prevent hose twisting
- Flow rate remains the same
- UV treated to withstand Australian conditions
- Tap Adaptor connects to 20mm or 25mm BSP taps
-
- The outlets are perfectly spaced to fit two water timers/computers side-by-side
- Rated to 1000 kPa
- It can be converted to the Maxi-Flo™ 19mm System using a GARDENA Tap Nut Adaptor (G2803B)
- UV stabilised to withstand Australian conditions
- Made in Germany and comes with a 5-year warranty
-
- Ergonomic design for comfortable grip and slip free use
- Fits 20mm (3/4") and 25mm (1") BSP taps
- Two 12mm snap-on independent watering outlets
- Angled outlets for easy attachment of fittings
-
- Fits hose 16-27mm diameter
- Butterfly Grip
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Fits hose 11-16mm diameter
- Screw Head
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Fits hose 16-27mm diameter
- Screw Head
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Fits hose 13-20mm diameter
- Screw Head
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Seals off the water path
- Prevents dripping connections
- Saves Water
-
- Fits hose 35-53mm diameter
- Screw Head
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Fits hose 22-32mm diameter
- Screw Head
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Fits hose 25-38mm diameter
- Butterfly Grip
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- 4 hose connector with on/off
- Clicks in 4 soaka hoses
- Clicks in 4 water hose connections
- Fit at hose end or poly tube end
- Screws to garden hose tap
-
- High quality UPDM rubber for optimum seal in hot or cold conditions
- Excellent properties for resistance to UV, weather, ozone and water
- Highest resistance to compression set or permanent deformation
- Special dimensions versus standard size washers to optimise seal and performance
- Made in Australia and comes with a 5-year warranty
-
- Fits hose 11-16mm diameter
- Butterfly Grip
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Fits hose 35-53mm diameter
- Butterfly Grip
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Fits hose 13-20mm diameter
- Butterfly Grip
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Fits hose 25–38mm diameter
- Screw Head
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Seals off the water path
- Prevents dripping connections
- Saves Water
-
- Fits hose 22-32mm diameter
- Butterfly Grip
- 9.0mm band width
- 304 Stainless Steel with zinc plated carbon steel screw
- Built to DIN 3017 Standards
-
- Easy grip profile provides a quick and easy tool-free connection
- The quickest and easiest way to add a hose connector to your taps
- Removable reducing insert suits 3/4" taps
- UV stabilised to withstand Australian conditions
- Made in Germany and comes with a 5-year warranty
-
- Connects a 12 mm garden hose to an indoor tap
- Suitable for taps with M22 x 1 female and M24 x 1 male thread
- Chrome finish to leave connected to a tap
- Ideal for townhouses and apartments to water plants in courtyards and balconies
-
- The GARDENA Indoor Tap Adaptor is ideal for use in apartments and terrace houses to water plants, veggies and flowers on balconies and small courtyards
- Once attached, the slider is pushed into place to fasten it tightly onto the tap. To remove it, simply push the slider in the opposite direction
- It attaches to a 13mm hose connector and hose and suitable for taps with M22 x 1 female and M24 x 1 male thread
- The GARDENA spanner is made of plastic thereby preventing the scratching of your tap fittings
- It is made in Germany and comes with a 5-year warranty
-
- Prevents hose kinking
- Metal spring
- Re-directs outlet to desired position
- 20/25mm universal tap fitting
- Full metal construction
-
- Made of the highest quality non-corrosive solid brass, not plated, it is reliable and long-lasting
- The specially shaped prolonged sleeve nut on the hose connector helps prevent the hose from kinking
- The Power Grip ring guarantees perfect connection to the hose and is integrated therefore cannot be lost
- The notches have been specially designed for comfortable handling and at the same time, help with tightening and loosening
- Reliable, long-lasting, rated to 1000 kPa and comes with a 5 year warranty
-
- The outlets are perfectly spaced to fit up to four water timers/computers
- The four channel water distributor is rated to 1000kPa
- Can be converted to the Maxi-Flo 19mm system using a GARDENA tap nut adaptor
- UV stabilised to withstand Australian conditions
- Made in Germany and comes with a 5-year warranty
-
- Made of the highest quality non-corrosive solid brass, not plated, it is reliable and long-lasting
- Its easy grip non-slip profile with specially designed notches provides a quick and effortless tool-free connection
- Durable solution for connecting garden hose to outdoor taps
- It comes with a removable reducing insert that suits 3/4” taps
-
- Suitable for 12mm garden hose fittings
- Connects to 15mm non threaded taps
- Strong clamp to give firm fit
-
- Comfort grip fittings for easy operation
- Fits ¾” and 1” taps
- Sturdy and durable brass
- 20 mm BSP threaded outlets for connection to standard hose fittings and irrigation installation fittings
- 3 Year Guarantee
-
- Suits 12mm fittings
- Converts one tap to four
- Solid brass construction
- UV protection against damage caused by the Australian sun
-
- Quality Australian Design & Innovation
- Solid Brass
- 3 year warranty
-
- Four 12mm snap-on independent and straight watering outlets
- Spacious design allows for multiple tap timers next to each other
- Fits 20mm and 25mm BSP taps
- Designed and tested in Australia
-
- Brass Snap on Adaptor
- Suits 12mm fittings
- 360 degree movement
-
- Secure and leak free connection
- Use with 12mm hose connector
- UV treated to withstand Australian conditions
- 2 Year Guarantee
-
- Easy grip profile provides a quick and easy tool-free connection
- The quickest and easiest way to add a hose connector to your taps
- Removable reducing insert suits 3/4" taps
- UV stabilised to withstand Australian conditions
- Made in Germany and comes with a 5-year warranty
-
- Made from high-quality die cast metal
- Holman 4 outlet metal manifold converts one garden tap into four
- Ideally suited for connecting to garden hoses, dripping/porous hoses, poly pipe or inline drip systems
