Irrigation
Sort Best selling
Showing 36 of 372 results
-
- 4mm drip emitter on spike
- Includes barbed joiner
- 360° radius
-
- 4mm trickler emitter on spike
- Includes barbed joiner
- 360° radius
-
- Constructed from heavy duty and corrosion resistant PVC
- High quality coil with higher inrush current makes sure plunger works in all conditions
- UV resistant
-
- Allows clean air to enter the drip system
- Allows air to vent out of the system during start up
- Inlet: 1/2 inch BSP male thread
-
- Closes off water flow automatically
- 1/2 inch BSP male thread
- Unscrew valve to clean out any debris
- Coloured coded to suit brown drip line
-
- Suits 13mm & 19mm Poly Pipe
- Suits inline drip
- Suits tough soils
- Easy to push into the ground
-
- UV stabilised
- Compatible with sprinklers and fittings
- Application in plumbing, irrigation and agriculture
-
- Suitable for spray and pop-up irrigation systems
- Secure with locking clamps or Loc-Sure clamps
- UV stabilised
- 5 pack
-
- Easy to install
- UV stabilised
- Lightweight
- Customised length
- Easy to trim to required length
-
- Use to control water flow
- Simple on-off operation
- UV stabilised
-
- 4mm micro barbed connection
- Max 4L/hr flow rate
- UV stabilised
-
- Reduces water pressure to 100kPa
- Threads directly to 3/4" and 1" taps
- UV tested
-
- Use to control water flow
- Simple on-off operation
- UV stabilised
-
- Convenient pre-cut lengths
- No uncoiling mess
- No need to buy any unnecessary extra pipe
- Guaranteed straight pipe
-
- Wi-Fi control with Holman Home via iOS or Android
- 6 zones can be added to the 3 start times
- 7 day scheduling options; odd and even days intervals
- Max 15 day rain delay
- Zone and multi-zone manual control
-
- UV Resistant
- High impact construction
- Pressure rated to 1000kPa
- Encapsulated o-ring
- Watertight connections
-
- Prevents grass from growing over the sprinkler head
- Protects your sprinklers from being damaged from Lawn mowers or vehicles
- Plastic construction
-
- Suits residential gardens and pots
- Avoids water run off
- Waters directly to the root zone
- Reduces evaporation, plant disease and weed growth
-
- Connects 25mm poly tube onto your garden tap
- Provides a secure and watertight connection
- UV stabilised
-
- UV Resistant
- High impact construction
- Pressure rated to 1000kPa
- Encapsulated O-ring
- Watertight connections
-
- Removes unwated grass around pop ups and gear drive sprinklers
- Suits all lawns
- Rubber grips
- Easy to turn handle
-
- Suitable for all sprinkler heads
- Fits standard hoses
- PVC coated
- UV protected
-
- Control up to 6 Valves
- Long run times up to 255mins in one minute increments
- Water saver feature allows quick adjustment of station run times
- Permanent memory
-
- UV Resistant
- High impact construction
- Pressure rated to 1000kPa
- Encapsulated o-ring
- Watertight connections
-
- Control up to 8 Valves
- Long Run Times
- 7 Day Watering
- Water Saver Feature
- Program for Water Restrictions
-
- Compatible with micro fittings
- UV stabilised for Australian conditions
- Suitable for most water feature pumps
- 3 year warranty
- Made in Australia
-
- Suitable for low pressure applications, hydroponics and ponds
- Compatible with micro fittings
- UV stabilised for Australian conditions
- Made in Australia
- Flexible – high kink resistance
-
- UV stabilised
- Compatible with sprinklers and fittings
- Application in plumbing, irrigation and agriculture
-
- Durable yet flexible material
- Used for domestic gardens
- Used with 13mm irrigation fittings to irrigate your garden
- Low density
-
- Precision machined brass
- Stamped pattern for easy identification
- Sharp angled inlet
- Pierces directly into poly tube
- Hex body for installation with a hex tool
-
- Pressure Compensating tube provides even water application over steep and undulating terrain and allows for longer runs
- 2 L/h flow rate with emitters spaced every 30 cms
- Discreet brown tubing blends into the landscape
- Two directly opposed outlet holes to prevent exit holes clogging
- Easy to install, fits difficult corners, rockeries etc.
-
- Wi-Fi control with Holman Home via iOS or Android
- 8 zones can be added to the 4 start times
- 7 day scheduling options; odd and even days intervals
- Max 15 day rain delay
- Maximum run time: 11:59 hr per ZONE
-
- The Starter Kit contains 1X 19mm Maxi-Flow™ Connection Set, 1X Connecting Point, 2X Water Stations, 1X T-Piece 25mm, 3X Connectors 25mm X ¾" Female Thread, and 1X Drain Valve.
- Water is sourced from the tap, passes through the Pipeline Connecting Point, and into the underground pipelines.
- The two Pipeline Water Stations, equipped with an automatic stop valve, offer versatile connection outlets for either a hose or a GARDENA pipeline connection devices such as an Oscillating Sprinkler or Garden Water Tap (sold separately).
- The Pipeline Drain Valve automatically drains the system and makes it frost-proof (when installed at the lowest point of the system).
- Made from UV stabilised material and tested to the equivalent of 3 years of Australian sunshine. Made in Europe, it comes with a 2-year warranty.
-
- The set is ideally suited for water-saving drip irrigation of up to 35 plants in garden beds with different water needs.
- Thanks to the unique Easy & Flexible connection technology, installation as well as any future extensions with additional components is easy and quick. All components can be effortlessly connected to each other, and if need be, detached again.
- The system ensures a constant and uniform water supply, even in the case of differences in height and water needs, making it ideal for garden conditions.
- If combined with the GARDENA Flex Water Computer (sold separately), you can automate the irrigation of your plants, saving even more time and resources.
- The set contains 1 Master Unit 1000, 1 Installation Tool, 15 m Connecting Pipe Flex (13 mm), 5 Pipe Pegs (13 mm), 1 T-Joint (13 mm), 2 L-Joints (13 mm), 5 Connectors (13 mm - 4.6 mm), 2 Plugs (13 mm), 15 m Supply Pipe (4.6 mm), 20 Pipe Pegs (4.6 mm), 35 Inline Drip Heads, pressure-compensating 2 l/h, 2 Shut-Off/Regulation Valves (4.6 mm), and 5 Plugs (4.6 mm).
-
- 25mm x 100m poly tube is made from premium material
- Poly tube is used for all irrigation applications
- There are three size diameters available in poly tube
-
- Discreet brown tubing blends into the landscape
- Self cleaning built-in filter in the emitter for added protection
- Use with standard 13mm poly fittings
- Two directly opposed outlet holes to prevent exit
- Made in Australia
