Micro Sprays & Water Misters
Sort Best selling
Showing 36 of 59 results
-
- This fitting is used to install risers into 13 mm poly tube
- Simply screw into the poly tube and screw the riser onto the other end
- Use with micro irrigation
-
- Use with 4 mm rigid polyethylene tubing
- Used to regulate water flow
- Can be used to isolate individual sprays and emitters
-
- Flow rate of 60 L/h @150 kPa
- Radius of up to 1 metre
- Pack size of 10
- UV treated
-
- Keeps tubing neat and tidy
- Easy to install
- Secures tubing to timber beams
-
- To suit 4mm flexbile poly tube for installation around garden beds and ferneries
- Barbed ends provide a tight fit
- UV stabilised
-
- Plants on the same line may require different amounts of water, use an in-line filter to adjust flow
- Barbed connections for insert into Poly Tube. Use a 4mm punch to create the hole before inserting
- UV stabilised
- Can be used to isolate certain sections of a micro irrigation system
-
- Suitable for 4mm and 13mm poly tubing and Drip Eze
- UV stablised
- The plug will block any hole less than 4mm in diameter
-
- Flow rate of 40 L/h @150 kPa
- Radius: up to 1.1 metres
- Pack of 10
- UV Treated
-
- Barbed fittings provide a tight fit
- Suits 4mm installations
- UV stabilised
-
- Flow rate 0-115 L/h @ 150 kPa
- Radius of up to 1.5 metres
- Fully adjustable flow rate
-
- 40 L/h @150 kPa
- Up to 1.5m spray radius
- Emits thin streams of water for localised irrigation
-
- Used to adjust water to a particular pot or area
- 0 - 115 L/h @150 kPa
- Radius of up to 2 metres
-
- This fitting is used to install risers into 13mm poly
- Simply screw into the poly tube and screw the riser onto the other end
- Use with micro irrigation
-
- Designed to spray over foliage
- 60 L/h @150 kPa
- Radius of up to 1 metre
-
- Includes 1/4 circle spray, 300mm stake, 450 mm poly tube with adaptor
- Flow rate up to 40 litres per hour
- Radius of throw up to 1.5 metres
-
- Punch 4mm holes to suit standard micro fittings
- Punch 6mm holes to suit 6mm drip fittings
- Punch 10mm holes for take off and elbow adaptors
- Includes a steel punch
- Simple to use
-
- Designed to spray over foliage
- 80 L/h @ 150 kPa
- Radius: up to 1 metre
-
- Stops tubing from sagging, keeping a tidy irrigation system
- UV stabilised
- Nail ready to tap into place with a hammer
-
- Prevents tube from lifting and moving
- Ideal to use for bends and curves in garden beds
- Wide top for straightforward hammering into place
- Designed for easier insertion to dirt
- Use with 13mm and 19mm tubing
-
- Easily replace damaged or blocked jets
- Expand your existing misting system
- Add extra spray jets into your existing system
-
- Suitable for holding down 13mm, 19mm and 25mm poly pipe
- Easy to push into the ground
- UV stabilised
-
- Helps keep micro sprays and jets pointing in the correct direction
- Suitable for micro irrigation systems
- UV stabilised
-
- Ready to use
- Flow rate of 40L/h @ 150 kPa
- Includes a stake and poly tube
-
- Suits 13, 19, and 25mm Poly Pipe
- Easy to push into the ground
- Suits tough soils
-
- Suits 13mm & 19mm Poly Pipe
- Suits inline drip
- Suits tough soils
- Easy to push into the ground
-
- Precision machined brass
- Stamped pattern for easy identification
- Sharp angled inlet
- Pierces directly into poly tube
- Hex body for installation with a hex tool
-
- Ideal for small gardens
- 4mm thread suitable for 4mm rigid risers and flex tubing
- Flow Rate: 108L/hr @ 250kPa
- UV stabilised
-
- Joins 4mm poly tube to larger poly tube sizes
- Barbed fittings provide a tight fit
- UV stabilised
- Pack of 10
-
- Helps keep micro sprays and jets pointing in the correct direction
- Comes in 2 sizes a 200mm & 300mm
- Stackable for versatility
-
- Includes full circle spray, 30 mm stake, 450 mm poly tube with adaptor
- Flow rate up to 40 litres per hour
- Radius of spray throw up to 1.5 metres
- UV stablised
-
- Holds poly pipe/ dripline in place
- Easy to push into the ground
- Suits 13mm & 19mm & 25mm pipe
-
- Barbed ends provide a tight fit.
- To suit 4mm flexible polyethylene tube for installation around garden beds & borders.
- Ideal for drip and spray systems.
-
- Great for penetrating foliage
- 40 L/h @150 kPa
- Radius: up to 1.5 metres
- UV treated
- Pack of 25
