Sort Most relevant
Showing 36 of 1170 results
-
- 360° pivoting head
- Magnetic base
- Belt clip
- High CRI (colour rendering index) lighting
- IP54 dust and water resistant
-
- Kit includes: 18V ONE+ Hammer Drill, 18V ONE+ Impact Driver, 18V ONE+ 4.0Ah Battery and 18V ONE+ 1.5A Charger.
- 2-speed gearbox and 22 clutch settings (Hammer Drill)
- 13mm metal ratcheting chuck (Hammer Drill)
- Double-Variable speed trigger (Impact Driver)
- Quick-change collet (Impact Driver)
-
- Kit includes: 18V ONE+ 4.0Ah Battery, 18V ONE+ 1.5A Charger, Screwdriver Bit and Belt Hook
- Suitable for drilling into brick, concrete, stone and soft metal
- 24 clutch settings and 2 speed modes for precise control
- Robust 13mm metal ratcheting chuck
- On-board LED light
-
- Set includes: 2 x PH2, 2 x HEX5 and 2 x SQ2 50mm Impact Diamond Driving Bits
- Diamond Grit technology provides secure fitment, longer life and a stronger grip
- Torsion zone absorbs extreme peaks of torque
- Extreme durability for extended bit life
-
- Powerful 300W motor
- 125mm pad size
- 7,000-15,000 RPM
- 85% dust pickup efficiency
- 6 year product extended trade warranty*
-
- Kit includes: 18V ONE+ Drill Driver, 18V ONE+ 2Ah Battery, Charger and Double-Sided Screwdriver Bit
- Suitable for drilling and driving screws into timber, plaster and soft metal
- 24 clutch settings, and 2 speed settings
- Built-in LED light
- Magnetic screw tray; drive bit holder
-
- Forged from a single piece of high quality carbon steel
- Heat treated blade for additional strength
- Tapered ground blade to provide the proper flexibility
- Patented Durasoft handle helps reduce user fatigue
- Integral finger guard protects against calluses
-
- 8 Outlet power board with ElectroSafe RCD safety switch
- Two wide spaced sockets for use with transformer plug packs
- Unique rotating covers keep outlets closed when not in use
- Electrical safety rotating covers - help keep dust and dirt out of the sockets
- Extra long 3.0m Lead to get power where it is needed
-
- 20 metre cable length
- F-Type plug - F-Type plug
- 75 Ohm Coaxial cable suitable for residential buildings
- Quad shielded cable provides better protection from outside sources of interference for a clearer signal
- PVC cables are more durable, corrosion & abrasion resistant and are able to withstand weathering
-
- 30 metre cable length
- 14 AWG is appropriate for bigger speakers or longer distances between points in the home
- PVC cables are more durable, corrosion & abrasion resistant and are able to withstand weathering
- Self-supporting cable capable for aerial installation with the figure 8/parallel wire configuration
-
- Available in 600mm and 900mm rail lengths
- Available in single or double rail design
- Rounded square and versatile design to suit any bathroom interior
- Rail can be cut down to size
-
- Upgrades units post 1992 to Quick Connect
- Ergonomic Gun
- 12m Length
-
- Ideal for residents
- Can fit up to 6 keys
- Digital combination lock
-
- 135° split point prevents bit wandering and promotes faster startup speeds
- Thicker, tapered core design
- Variable flute geometry rapidly ejects chips and material
-
- Suitable for drilling into stainless steel, hard metal, wood and plastic
- 135° split point for more precision
- M35 5% cobalt blend
-
- 135° split point prevents bit wandering and promotes faster startup speeds
- Thicker, tapered core design
- Variable flute geometry rapidly ejects chips and material
-
- Suitable for drilling into stainless steel, hard metal, wood and plastic
- 135° split point for more precision
- M35 5% cobalt blend
-
- Pack includes: 5 x 38mm Twist Lock Cutting Discs
- Thin design for making fine cuts
- Larger 38mm diameter
-
- Pack includes 2 x Wire Brushes
- Suitable for removing rust and other forms of corrosion
- 17mm Fanned Steel Brush for uneven surfaces
- 19mm Flat Head Steel Brush for flat surfaces and hard-to-reach areas
- Max rpm: 15,000
-
- Set includes: 7 x Rotary Drill Bits in sizes 0.8mm, 1.2mm. 1.6mm, 2mm, 2.4mm, 2.8mm and 3.2mm
- M2 high-speed steel
- Sharpened edges
- Max rpm: 33,000
-
- Diamond coating designed for cutting notches in soft tiles
- 38mm diameter
- Compatible with the RYOBI Twist Lock Mandrel (RRTATLM)
- Max rpm: 35,000
- Made in USA
-
- 135° split point prevents bit wandering and promotes faster startup speeds
- Thicker, tapered core design
- Variable flute geometry rapidly ejects chips and material
-
- Suitable for drilling into stainless steel, hard metal, wood and plastic
- 135° split point for more precision
- M35 5% cobalt blend
-
- Carbide coated for extra durability and prolonged life
- Suitable for cutting timber and laminates
- 38mm diameter
- Compatible with the RYOBI Twist Lock Mandrel (RRTATLM)
- Max rpm: 35,000
-
- Suitable for drilling into metal, timber and plastic
- 135° split point for more precision
- Thicker, tapered core design
- Rapid eject flute with chamfered edges
-
- Suitable for drilling into metal, timber and plastic
- 135° split point for more precision
- Thicker, tapered core design
- Rapid eject flute with chamfered edges
-
- Suitable for drilling into stainless steel, hard metal, wood and plastic
- 135° split point for more precision
- M35 5% Cobalt blend
-
- 135° split point for more precision
- Thicker, tapered core design
- Rapid Eject Flute
- Chamfered Edge
-
- Suitable for drilling into metal, timber and plastic
- Extra-long flute length for deep penetration
- Rapid eject flute promotes faster, more efficient drilling
- Chamfered edges produce faster, cleaner holes
- Available in sizes 3-12mm
-
- Pack includes 5 x 32mm Cutting Discs
- Suitable for cutting metal and plastic
- Small 32mm size enables precise cuts in tight spaces
- Compatible with the RYOBI (RRTARM) Mandrel or similar standard Mandrel
- Max rpm: 35,000
-
- 120-grit 10-pack of Sanding Bands
- Ideal for surface preparation prior to painting
- Great for removing very light scratches in timber, metal and plastic
- Suitable for all rotary tools
- Compatible with 13mm rotary tool sanding mandrel
-
- Suitable for polishing and restoring metal and plastic surfaces
- Help remove scratches, blemishes and other imperfections
- Compatible with the RYOBI felt polishing wheel (RRTAFPW)
-
- Suitable for carving and engraving timber, plastic and metal
- High-speed steel construction for increased wear resistance
- 1.6mm size
- 3.2mm diameter shank for universal fitment
- Max rpm: 35,000
-
- Provides a secure connection
- Compatible with rotary tool top screw accessories
- RYOBI 12.5mm Rotary Sanding Band Mandrel (RRTASBM) and Rotary Twist Lock Mandrel (RRTATLM) also available
-
- Suitable for shaping, smoothing or removing material
- Carbide material for increased wear resistance and fast engraving speeds
- 3.2mm size
- 3.2mm shank for universal fitment
- Max rpm: 35,000
-
- Suitable for carving, engraving and etching tile and glass
- Diamond coating
- 1.5mm size
- 3.2mm diameter shank for universal fitment
- Max rpm: 35,000
