Sort Most relevant
Showing 36 of 1174 results
-
- Set includes 3 x 80 Grit Delta/Multi-Tool Sanding Sheets, 4 x 120 Grit Delta/Multi-Tool Sanding Sheets and 3 x 240 Grit Delta/Multi-Tool Sanding Sheets
- Hook and loop backing
- Compatible with 80mm Delta Sanders and Multi-Tools
-
- 12° convex angle for working on edges, weld seams and other small surfaces
- Made from zirconia alumina grain
- Self-sharpening properties
- Fan-shaped design
- Delivers enhanced material removal rate
-
- Set includes 3 x 80 Grit Delta/Multi-Tool Sanding Sheets, 4 x 120 Grit Delta/Multi-Tool Sanding Sheets and 3 x 240 Grit Delta/Multi-Tool Sanding Sheets
- 6-hole design for greater ventilation and material/dust extraction
- Hook and loop backing
- Compatible with 95mm Delta Sanders and Multi-Tools
-
- Wind and water resistant
- Retains body heat
- Aluminised polyester
-
- Set includes: 6 x PH2 50mm Impact Diamond Driving Bits, Bit holder and carabiner
- Diamond Grit Technology greatly improves performance
- Torsion zone absorbs extreme peaks of torque
- Extreme durability for extended bit life
-
- Designed to fit Nitto style plugs
- ¼” BSP Male Thread suitable to fit ¼” BSP Female adaptors
- Durable steel construction
- Blue-coloured band identifies this fitting as Nitto style
-
- 10mm barb for secure connection to other Nitto style fittings
- Maximum 150PS
- Made from high-quality steel
- Blue coloured band identifies fitting as Nitto style
-
- Suitable for drilling into stainless steel, hard metal, wood and plastic
- Four-cut design for maximum material contact and faster drill speeds
- 135° split point for more precision
- M35 5% Cobalt Blend
- 3 flat shank (≤4.5mm w.o 3)
-
- Four-cut design for maximum material contact and faster drill speeds
- 135° split point for more precision
- Thicker, tapered core design
- Rapid eject flute
- Chamfered Edge
-
- Designed to fit Ryco style plugs
- ¼” BSP Male Thread suitable to fit ¼” BSP Female adaptors
- Durable steel construction
- Red-coloured band identifies this fitting as Ryco style
-
- Four-cut design for maximum material contact and faster drill speeds
- 135° split point for more precision
- Thicker, tapered core design
- Rapid eject flute
- Chamfered Edge
-
- Creates 35mm flat-bottomed holes (aka recesses)
- Carbide blades
- Centre point prevents bit wobbling
- Suitable for use with drill drivers and Bench Drill presses (incl RYOBI RDP102L)
-
- 3 pack
- 1.65mm twist line
- Suits hybrid 18V RLT1830H15
- Suits 18V RLT1830LiX4, OLT1830, CLT1830LBC, CLT1830
- Suits 36V - RLT36 and RLT36B
-
- Designed to fit Jamec style plugs
- ¼” BSP Male Thread suitable to fit ¼” BSP Female adaptors
- Durable steel construction
- Orange-coloured band identifies this fitting as Jamec style
-
- Designed to fit other Ryco style plugs
- Maximum 150PSI
- Durable steel construction
- Red-coloured band identifies fitting as Ryco style
-
- Pack includes 5 x 89mm TX10 HYPERTORQUE™ Impact Driver Bits
- Custom engineered HYPERTORQUE™ torsion zone
- Custom alloy material, designed for high torque applications
- Precision fitment, preventing cam-outs
- Magnetised tips for enhanced fastener retention
-
- Pack includes 5 x 89mm TX40 HYPERTORQUE Impact Driver Bits
- Custom engineered HYPERTORQUE torsion zone
- Custom alloy material, designed for high torque applications
- Precision fitment, preventing cam-outs
- Magnetised tips for enhanced fastener retention
-
- Pack includes 2 x 89mm TX20 HYPERTORQUE Impact Driver Bits
- Custom engineered HYPERTORQUE torsion zone
- Custom alloy material, designed for high torque applications
- Precision fitment, preventing cam-outs
- Magnetised tips for enhanced fastener retention
-
- Pack includes 5 x 89mm TX30 HYPERTORQUE Impact Driver Bits
- Custom engineered HYPERTORQUE torsion zone
- Custom alloy material, designed for high torque applications
- Precision fitment, preventing cam-outs
- Magnetised tips for enhanced fastener retention
-
- Pack includes 5 x 89mm TX25 HYPERTORQUE Impact Driver Bits
- Custom engineered HYPERTORQUE torsion zone
- Custom alloy material, designed for high torque applications
- Precision fitment, preventing cam-outs
- Magnetised tips for enhanced fastener retention
-
- Pack includes 1 x cone nozzle, 1 x fan nozzle and adaptors for wide range fitment
- Genuine RYOBI part
- Compatible with RYOBI sprayer models OWS1880, OWS1870, R18SPR12, OWS1815, OBS1815, R36BPS10, R18SPR130
-
- Pack includes 5 x 89mm TX20 HYPERTORQUE™ Impact Driver Bits
- Custom engineered HYPERTORQUE™ torsion zone
- Custom alloy material, designed for high torque applications
- Precision fitment, preventing cam-outs
- Magnetised tips for enhanced fastener retention
-
- Pack includes 2 x 89mm TX20 HYPERTORQUE Impact Driver Bits
- Custom engineered HYPERTORQUE torsion zone
- Custom alloy material, designed for high torque applications
- Precision fitment, preventing cam-outs
- Magnetised tips for enhanced fastener retention
-
- Durable carbide tip, for multi-material drilling and extended bit life
- Sharpened edges, provide faster, cleaner holes
- Precision start tip, reduces bit wandering
- High-volume flute, removes dust and debris efficiently
- ¼” hex shank, Compatible with drill drivers, hammer drills and impact drivers
-
- Extended reach for cleaning hard-to-reach places
- Flexible micro-size suction tubes clean around objects
- Compatible with RYOBI Stick Vacuum models R18XSV9, R18XSV914, R18XSV9PET142 and R18HVP
-
- Genuine replacement part for RYOBI petrol lawn mowers and pressure washers
- Fits both 175cc and 190cc subaru engines
- Compatible with RYOBI models RLM4617ME, RLM4619SME, RLM4619SMB, RPW3200
-
- Fan-shaped design
- 6° convex angle for working on edges, weld seams and other small surfaces
- Made from a premium ceramic aluminium oxide grain
- Self-sharpening properties
- Suitable for use with angle grinders
-
- Set includes: 3 x Countersink Sets (#6, #8, #10)
- Drills pilot hole and counterbore combinations of (3.57mm/9.5mm, 4.36mm/9.5mm, 4.76mm/9.5mm)
- Tapered drill bit design
- Carbide cutting edge for smooth countersink bore
- Grub screw for easy drill bit replacement
-
- Ultra-durable hard wearing acrylic block with internal plumb & level vials
- Completely transparent allowing users to see the work piece below
- Metric markings in 5mm increments for quick & easy common measurement
- Can be used as a template tool for marking electrical sockets on walls – 96 (L) x 50mm (H)
- If placed flat, it can also be used as a bullseye level which levels in all directions (ideal for levelling washing machines, dryers etc)
-
- 12° convex angle for working on edges, weld seams and other small surfaces
- Made from zirconia alumina grain
- Self-sharpening properties
- Fan-shaped design
- Delivers enhanced material removal rate
-
- 12° convex angle for working on edges, weld seams and other small surfaces
- Made from zirconia alumina grain
- Self-sharpening properties
- Fan-shaped design
- Delivers enhanced material removal rate
-
- Designed to fit other Nitto style plugs
- Maximum 150PSI
- Durable steel construction
- Blue coloured band identifies fitting as Nitto style
-
- Designed to fit other Jamec style plugs
- Maximum 150PSI
- Durable steel construction
- Orange-coloured band identifies fitting as Jamec style
-
- 1.6mm line
- Auto feed spool
- Simple click in and replace old spool
-
- Pack includes ten 50mm PH2 Impact Driver bits
- Magnetised HEX tips assist with fastener retention
- 1/4“ hex shank, suitable for impact drivers and drill drivers
- Custom engineered HYPERTORQUE™ Torsion Zone absorbs extreme torque peaks
-
- Apply sparingly directly onto tool reception of drill bits, chisels and core cutters.
- Specially formulated for use on demolition and rotary hammers.
- Improves efficiency of lubrication and maintenance.
- Grease assists with the easy change over of drill bits into chucks.
- A must for heavy duty users.
