Post Supports & Anchors
Sort Best selling
Showing 36 of 51 results
-
- Suits 90 x 90mm and 100 x 100mm posts
- Decorative 2 piece post cover half set that fits around existing posts
- Applies to Australian Standards
- The post cover is made from a high-grade polymer plastic, therefore does not warp, rot or absorb moisture
- Made to be painted - simply paint with any outdoor acrylic paint.
-
- Suitable for a variety of applications
- 2mm thick steel
- Suitable for framing stairs, shelves and corner supports
- 304 Stainless Steel - durable, corrosion resistant, and suitable for use in some coastal and corrosive environments
- Suitable for screw or bolt fixing
-
- Suitable for a variety of applications
- Used in various applications
- Concealed finish for premium post supports
- Heavy Duty M16 Shaft
-
- Improved cap design – concealed or open assembly options
- Galvanised finish for durability and long-life
- M10 & M12 Bolt Hole Options in Base
- Australian Made - High quality, peace of mind, and supporting Aussie jobs
- Economical price point
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Full Stirrup Post Anchors are primarily used for bolting to existing concrete.
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast.
- Stems in stirrups are sealed for termite protection - AS1397-2001
-
- Hot dip galvanised coating after manufacture and made from 4mm steel
- Suitable for severe external environments
- 10mm bolt holes for fixing with M10 bolts
-
- Hot dip galvanised for excellent corrosion resistance Hot-dipped galvanised coating to provide long-term protection.
- Manufactured from 4mm steel
- 10mm bolt holes for fixing with M10 bolts
- Suitable for severe external environments.
-
- Black finish over hot dipped galvanising for decorative finish
- Used for locating posts onto existing concrete or decking
- Adjustable washer to facilitate adjustment after bolt holes have been drilled.
-
- Hot-dipped galvanised coating to provide long-term protection.
- Suitable for severe external environments.
- Designed and engineered to Australian National Construction Code (NCC).
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Suits 90x90mm, 100x100mm, 115x115mm, 125x125mm and 135x135mm posts.
- Decorative 2 piece post cover half set that clips around existing posts.
- Applies to Australian Standards.
- The post cover is made from a high-grade polymer plastic, therefore does not warp, rot or absorb moisture.
- Made to be painted - simply paint with any outdoor acrylic paint.
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Hot-dipped galvanised coating to provide long-term protection.
- Manufactured from 4mm steel.
- 10mm bolt holes for fixing with M10 bolts.
- Used for locating posts onto existing concrete or decking.
-
- Bolt Down Post Anchors features a knockout 3mm adjustable washer to facilitate adjustment after the bolt holes have been drilled. Used for locating post onto existing concrete or decking
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
-
- Suits 112 x 112mm, 125 x 125mm and 135 x 135mm posts
- The kit includes Large FEDTRIM Post Cover and 2 piece galvanised metal support bracket
- The post cover is made from a high-grade polymer plastic, therefore does not warp, rot or absorb moisture.
- Applies to Australian Standards
- Made to be painted with a quality exterior paint
-
- Full Stirrup Post Anchors are primarily used for bolting to existing concrete
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
SIMPSON STRONG-TIESimpson Strong-Tie Concealed Post Base - Suits 115 To 125mm Square Posts
- The 25mm standoff reduces the potential for decay at the post end
- Suits 115mm to 125mm square posts
- Can be cast-in-place or retrofitted with adhesive or mechanical anchors
- All pins and fasteners needed for installation are included
- Manufactured in heavier gauge steel for a stronger connection, finished with ZMAX® Galvanised
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
SIMPSON STRONG-TIESimpson Strong-Tie Concealed Post Base Suits 90mm To 100mm Square Posts
- Suits 90mm to 100mm square posts
- The 25mm standoff reduces the potential for decay at the post end
- Can be cast-in-place or retrofitted with adhesive or mechanical anchors
- Manufactured in heavier gauge steel for a stronger connection, finished with ZMAX® Galvanised
- All pins and fasteners needed for installation are included
-
- Full Stirrup Post Anchors are primarily used for bolting to existing concrete.
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast.
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Includes 5x adaptors to suit poles from 25 to 67mm in diameter
- Hot dipped galvanised for long service life
- Drive hole allows use of steel rod to twist into the ground
- Aggressive coarse thread to bite into the ground
- Drainage hole at base to prevent water build-up in wet conditions
-
- Conforms to AS3660.1 - 2000, protection of buildings from termites
- All joints are welded
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Post bases secure timber posts to concrete, while providing a 25mm standoff height to help prevent rot from standing water and ground moisture
- Designed to meet stringent building codes for seismic or high-wind events
- ZMAX galvanisation with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- Install with Outdoor Accents structural wood screws and hex-head washers (sold separately) for a decorative look
- Slotted for adjustability
-
- Hot dipped galvanised 4mm steel
- All joints are welded
- Conforms to AS3660.1 – 2000, Protection of Buildings from Termites
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Easy install
- Economical price point
- G300 steel in 3mm thickness and corrosion protected with HDG
- Two fixing styles with either one or two M12 concrete bolts
-
- Manufactured from 5mm steel
- Hot dip galvanised for excellent corrosion resistance
- 10mm bolt holes for fixing with M10 bolts
-
SIMPSON STRONG-TIESimpson Strong-Tie Concealed Post Base Suits 140mm To 152mm Square Posts
- Suits 140mm to 152mm square posts
- The 25mm standoff reduces the potential for decay at the post end
- Can be cast-in-place or retrofitted with adhesive or mechanical anchors
- Manufactured in heavier gauge steel for a stronger connection, finished with ZMAX® Galvanised
- All pins and fasteners needed for installation are included
-
- Full Stirrup Post Anchors are primarily used for bolting to existing concrete
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection
- Suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Full Stirrup Post Anchors are primarily used for bolting to existing concrete
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Full Stirrup Post Anchors are primarily used for bolting to existing concrete
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
