Screws
Sort Best selling
Showing 36 of 865 results
-
- Designed specifically for Decking applications
- Countersunk Trim head with nibs for flush finish
- Weather Force corrossion protection
- # 2 Square Drive (Bit included) with Type 17 Point for quick clean installation
- Suitable for Softwood and ACQ Treated Timbers
-
- Self-drilling tip for use in aluminium – not designed for steel
- Undercut countersunk head designed to sit flush or slightly below the surface
- Corrosion resistant 304 grade stainless steel
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Engineered with marine-grade 316 stainless steel, offering exceptional protection against corrosion in harsh and coastal applications.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
- Manufactured with high-grade materials for maximum corrosion protection, making it ideal for use in coastal and marine environments.
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Top Grip provides a positive seal and reduces the roof sheet riding down
- Thread-to-point technology for faster starting, no skidding and stable installation
- Vortex Point for fastening to timber or metal up to 1.5mm
-
- Designed specifically for Decking applications
- Countersunk Wide head providing strong hold and flush finish
- 304 Stainless Steel
- T25 Drive (Bit included) with Type 17 Point for quick clean installation
- Suitabel for both Soft and Hardwood varieties
-
- Galvanised Class 3: Suitable for external use
- Bugle head ensures a flush surface finish
- 5mm hexagonal drive head and T17 drill point designed for high-torque fastening
- Knurling reduces timber splitting and reduces torque required to drive the screw into timber.
- Under head rib design improves drive efficiency and countersinking into timber
-
- FibreTEKS® tip combines drilling and tapping action for smooth penetration through fibre cement and light steel.
- Class 4 galvanisation corrosion protection is ideal for applications exposed to weather or coastal conditions.
- The underhead cutter breaks up cement for a flush finish.
-
- Type 17 point features a cutting flute for fast, clean starts in timber, reducing the risk of splitting.
- This 12G screw is approximately 5.5mm in diameter and 65mm in length.
- The hex head design allows higher torque transfer
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Engineered with marine-grade 316 stainless steel, offering exceptional protection against corrosion in harsh and coastal applications.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through.
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- This 8G screw is approximately 2.4mm in diameter and 20mm in length.
- The low-profile button head provides a smooth, finished appearance while distributing load over a wider area, ideal for applications where clearance and aesthetics are important.
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- This 8G screw is approximately 2.4mm in diameter and 32mm in length.
- The low-profile button head provides a smooth, finished appearance while distributing load over a wider area, ideal for applications where clearance and aesthetics are important.
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Dual Type-17 tip delivers strong self-drilling performance in both timber and thin metal. It pierces timber up to 2x faster with reduced timber splitting.
- Gold passivation adds a durable protective layer over zinc plating, enhancing corrosion resistance while providing a clean, distinctive finish that improves visibility and surface durability.
- The gently tapered bugle head spreads load over a wider area, reducing surface damage and pull-through for a smooth, flush finish.
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- This 10G screw is approximately 4.8mm in diameter and 30mm in length.
- The countersunk head ensures a flush, streamlined finish, making it ideal for applications where a smooth surface is essential.
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Type 17 point features a cutting flute for fast, clean starts in timber, reducing the risk of splitting.
- This 12G screw is approximately 5.5mm in diameter and 50mm in length
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Engineered with marine-grade 316 stainless steel, offering exceptional protection against corrosion in harsh and coastal applications.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Gold passivation adds a durable protective layer over zinc plating, enhancing corrosion resistance while providing a clean, distinctive finish that improves visibility and surface durability.
- The gently tapered bugle head spreads load over a wider area, reducing surface damage and pull-through for a smooth, flush finish.
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- This 8G screw is approximately 2.4mm in diameter and 30mm in length.
- The countersunk head ensures a flush, streamlined finish, making it ideal for applications where a smooth surface is essential.
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- This 10G screw is approximately 4.8mm in diameter and 16mm in length.
- The broad, low-profile wafer head offers maximum surface contact for excellent clamping force and reduced pull-through in sheet materials.
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Gold passivation adds a durable protective layer over zinc plating, enhancing corrosion resistance while providing a clean, distinctive finish that improves visibility and surface durability.
- The gently tapered bugle head spreads load over a wider area, reducing surface damage and pull-through for a smooth, flush finish.
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
-
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Zinc plating applies a uniform protective coating that enhances surface durability, delivers moderate corrosion resistance, and ensures a clean, professional finish.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
