Ramset
Sort Most relevant
Showing 36 of 344 results
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging, such as mould growth, when compared to all-metal anchors
- Complete with hex head screw for a easy installation
-
- Suitable for use with the FrameBoss™ Powder Actuated Tool magazine.
- For fastening to standard strength concrete, masonry and steel up to a maximum of 8mm.
- 1120N/mm2 Shear Strength.
- 50-55HRC Hardness.
-
- Available with pre-assembled washers to improve pullover strength.
- Manufactured from high-strength material to avoid breakage.
- Available with either a plain or striated shank, and in a range of different sizes and head styles
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- unique "pull-down" section
-
- High performance Grade 5.8 carbon steel, pre-cut to standard chemical anchoring lengths and supplied with nuts and washers
- Gold passivated, zinc plated for indoor or dry climates
- Depth set mark to ensure correct embedment
- Reliable external hex drive for installing with capsules.
- Chisel-ended to prevent unthreading.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Countersunk sleeve allows for flush finishing.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 6 - 9 gauge screws.
-
- Anchor diameter equals the required hole diameter providing maximum shear capacity for hole size and making drill bit selection simple.
- Cold forged construction ensures superior strength and reliability.
- The anchor design ensures maximum expansion of the sleeve and pull-down on the fixture.
- Anti-rotation expansion sleeve is designed to grip the sides of the hole, preventing anchor rotation during installation.
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Countersunk sleeve allows for flush finishing.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 6 - 9 gauge screws.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- unique "pull-down" section
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Countersunk head provides a neat flush finish.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- unique "pull-down" section
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- unique "pull-down" section
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Unique "pull-down" section
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- unique "pull-down" section
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Unique "pull-down" section
- Stainless steel grade 316
-
- Patented 'pull-down' expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled 'through fixture' anchor eliminates marking out and re-positioning of fixtures
- Galvanised steel
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 8-9 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
- Flanged/washered head prevents embedding of head in timber
- Hardened high carbon steel construction
- Non-expansion anchor will not burst substrate
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Countersunk head provides a neat flush finish.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Countersunk head provides a neat flush finish.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Features unique "pull-down" section
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Countersunk head provides a neat flush finish.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Countersunk head provides a neat flush finish
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Unique "pull-down" section
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Features unique "pull-down" section
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Countersunk head provides a neat flush finish
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Countersunk head provides a neat flush finish
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented 'pull-down' expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled 'through fixture' anchor eliminates marking out and re-positioning of fixtures
- Trusted Ramset quality
