Tool Accessories
Sort Best selling
Showing 36 of 1590 results
-
- 11.3mm Crown Width
- 8mm Leg Length
- 1.2mm Wire Thickness
- 1000 Pack
-
- Reduces torque and friction
- Improves surface finish
- Accurate thread quality
- Reduced friction for extremely high quality surface finish
-
- 118° standard point for general purpose applications
- Precision engineered parallel shank for accurate hole size
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- Common Length 6" (152mm) overall length with a 3-3/8" (86mm) flute length
- Reduced shanks suit 13mm drill chucks
- 118° standard point for general purpose applications
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Blue surface finish for ferrous applications. The steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels
-
- Removal of rust and grime from BBQ's
- Removal of rust and paint from gutters
- Removal of rust from trailers
- Removal of rust and paint from sheds
- Removal of rust and paint from garage doors
-
- 118° standard point for general purpose applications
- Precision engineered parallel shank for accurate hole size
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- Viper Point Design - Delivers up to 2X faster drilling speeds versus conventional HSS drill bits
- 118° Split Point (>3.5mm & 9/64") - Minimises wandering when starting
- Made from European M2 High Speed Steel (HSS) - Offers the best combination of strength, heat & wear resistance
- Bright Finish - For general purpose applications, non-ferrous metals & plastics
-
- Applications – Aluminium, sheet metal, mild steel, steel alloy, brass, copper and hard ferrous metals.
- 1.2mm Thickness for quick cutting – have been chosen as they combine the best everyday cut off use with the ability to cut sheet metal faster.
- Complies with EN12413 and Australian Standard AS 1788:1-1997.
-
- Tungsten Carbide Tipped- Cuts 5 times faster than conventional bi-metal holesaws in timber
- Deep cut-outs for swift and easy core ejection
- International Thread Pattern Accepts all standard arbors
-
- Set includes: 6 x HyperTorque™ PH2 50mm Impact Rated Driving Bits, 2 x HEX5 50mm Impact Rated Driving Bits, 2 x SQ2 50mm Impact Rated Driving Bits, Carabiner and Easy Bit Access Bit Holder
- HyperTorque torsion zone absorbs extreme torque peaks
- Magnetised tips assist with fastener retention
- Custom alloy provides optimum blend of hardness and elasticity
- ¼” hex shank suitable for suitable for impact drivers and drill drivers
-
- Ideal for surface preparation
- Suitable for grinding machines and angle grinders
- General purpose grinding
- 80-120hrs usage
-
- Breaker tip design for demolition effect providing up to 20% faster drilling speeds over previous generation bits.
- New solid carbide head provides up to 50% better performance in reinforced concrete.
- Patented rebar chamfering reduces bit jamming
- Centering tip ensures immediate spot drilling and prevents skidding
- Exclusive Kango design
-
- Optimised Point Tip Minimises Splintering and Controls Speed
- Parabolic Scoop Larger Cutting Area For More Aggressive Removal Of Wood Chips And Faster Holes
- Reinforced Shank Allows for Faster Speeds, more aggressive cuts and prevents bit breakage
- 1/4” Quick Change Shank Reduces Slipping In Standard Chucks And Also Works With Impact Drivers
-
- Innovative tip geometry for full fitment to screw head, eliminating wobble, movement, slipping and cam-out
- Flex zone optimised to transfer maximum torque through the screw and maximise life
- Magnetised tips for improved fastener retention
-
- Flex Tech torsion zone – Absorbs high torque stress and reduces bit fracture.
- CNC Magnetic tips – For supreme grip.
- Hardened S2 modified impact resistant steel – For extended life.
- 6.35mm (1/4”) -- Accessory fitments.
-
- 4-Cut thin external tips for less friction
- Half-round spiral accelerates dust extraction away from tip. Square spiral combines compression channel with a depression chamber for perfectly controlled dust removal
- Sand-blasted Finish
-
- Compatible with all air compressors and pneumatic tools/equipment
- Suitable for most commercial and industrial applications
- Nitto fittings with ¼” BSP male and coupler
- Braided PVC hose resistant to kinking, abrasion, grease and oil
- Rated to 300 Max PSI
-
- Four cutting edges function evenly and do not seize up on reinforcing steel
- One-piece, solid carbide tip and patented reinforcing chamfering ensure low vibrations and the optimum drilling performance when drilling into steel
- Lateral support and the maximum possible area of the interface between the carbide and steel body compensate for torsion forces
- Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance
- High-volume flute geometry ensures the optimum removal of drilling dust
-
- 118° standard point for general purpose applications
- Precision ground flute designed for fast chip removal
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Blue surface finish for ferrous applications. The steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels
-
- Parallel Shank for rotary hammer and percussion drilling
- Double spiral flute provides greater dust extraction, extending drill life
- 2 cutting edged carbide percussion tip with semi positive profile for aggressive drilling in hard materials
- Brazed tip to ensure a perfect bond between tip and body
-
- Removable Socket Head solves frustrations by allowing easier removal of metal shavings quickly and effortlessly, enhancing the overall life
- Magnet provides fastener retention for ease of use
- Lobular Design reduces stripping damage by driving fastener on the sides instead of forcing the corners to turn.
- Engineered for use in impact drivers
- Applications include wood and metal
-
- 118° standard point for general purpose applications
- Precision ground flute designed for fast chip removal
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Blue surface finish for ferrous applications. The steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels
-
- Innovative tip geometry for full fitment to screw head, eliminating wobble, movement, slipping and cam-out
- Flex zone optimised to transfer maximum torque through the screw and maximise life
- Magnetised tips for improved fastener retention
-
- 90° angle for working in hard-to-reach areas
- Slimline design measures 35.5mm across (chuck to back)
- Enhanced magnets securely grip to driving/drill bits
- Hardened gears optimise torque transfer
- 25mm PH2 driving bit included
-
- Pack includes five 152mm PH2 Impact Driver bits
- Magnetised tips for enhanced fastener retention
- Custom engineered HYPERTORQUE™ torsion zone
- Custom Alloy Material, designed for high torque applications
- 1/4“ hex shank, suitable for drill drivers and impact drivers
-
- Quick setting - Hot melt glue sets quicker than other glue types
- Pack quantity - Ample sticks to complete your project
- Provides secure adhesion of many different materials
-
- Cuts multiple materials
- Special bond formulation
- Convenient and versatile
-
- 118° standard point for general purpose applications
- Precision engineered parallel shank for accurate hole size
- Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
- Bright finish for general purpose applications, non-ferrous metals & plastics
-
- SDS quick change
- Long drilling depth of 1000mm
- Durable construction
-
- 4-Cut thin external tips for less friction
- Half-round spiral accelerates dust extraction away from tip. Square spiral combines compression channel with a depression chamber for perfectly controlled dust removal
- Sand-blasted Finish
-
- Set includes: 25mm Holesaw Cup, 32mm Holesaw Cup, 54mm Holesaw Cup, 60mm Holesaw Cup and Arbor with 6mm Brad Point Pilot Bit
- Aggressive tooth design ensures fast cuts in timber and plaster
- Large ejection slots for plug removal
- 44mm cut depth
-
- Ideal for use on reinforced concrete, concrete, brick and natural stone
- Solid carbide head for up to 20% faster drilling with low vibration
- Enlarged rebar chamfers protecting bit head from breaking when making contact with rebar
- Enlarged flute entrances for effective stock removal and fast drilling speeds
- German made PGM certified bits for guaranteed drilling accuracy and safe anchor fixings
-
- Made from Bi-Metal Cobalt HSS for toughness and longer life
- 32mm cutting depth
- Varied pitched cutting teeth reduces vibration for cleaner finish and greater accuracy
-
- For drilling into metal, wood or plastic
- Suitable for holesaw depths up to 38mm
- Made from High Speed Steel for heat and wear resistance
-
- Heat treated blades to stay sharp longer
- Cutting depth 25mm
- For cutting wood & soft metal
- Arbor & pilot drill 6mm
- Holesaw: 32, 38, 51 & 54mm
-
- Set includes: 75mm, 150mm, 300mm & 450mm Impact Rated Extension Bar
- Enhanced internal magnets assist with fastener retention
- Custom engineered HyperTorque™ torsion zone
- Custom alloy material, designed for high torque applications
- ¼” hex shank, suitable for drill drivers and impact drivers
