Sort Most relevant
Showing 36 of 4119 results
-
- Durable and lightweight
- Slip resisitant wall pads
- Inside hand space for accessibility
-
- Coarse 60 grit for preparation work, sanding rough sawn timber and removing paint
- Medium 80 grit for general sanding and removing small irregularities
- Fine 120 grit for fine sanding and final preparation
-
- Suits Aluminium Rivets 2.4mm - 4.8mm
- Suits Steel Rivets 2.4mm - 4.0mm
- Suits Stainless Steel Rivets 2.4mm - 4.0mm
- Includes 2.4mm/3.2mm/4.0mm/4.8mm Nozzles
- Lifetime Warranty
-
- Folds to half size, including carry handle
- Handle mounted trigger brake and reset button
- Side kick-stand
- 320mm diameter wheel
- Carry bag included
-
- 120 Grit for smoothing wood surfaces ready for painting and finishing or for general purpose sanding applications
- Excellent stock removal on woods, paints and lacquers as well as steel, stainless steel (INOX) non-ferrous metals
- Aluminium Oxide abrasive grain provides excellent stock removal properties
- Hook and loop backed for quick and easy sheet changes
-
- 118° Ground from Solid High Speed Steel for durability
- New German designed toughened case to withstand a fully loaded drill case drop test
- Stable display case for easy access to drill bits in any tool room
- New look design with easy reference to material applications
-
- Durable and lightweight
- Slip resisitant wall pads
- Inside hand space for accessibility
-
- Sturdy cast iron and plastic construction
- Protective pads for both top and bottom jaws
- Solid rubber grip
- Available in 150mm, 200mm and 300mm jaw width sizes
-
- High Quality Carbide - For 10x longer life than standard glass and tile drills
- Multi-Faceted Spear Point - For improved penetration
- Anti-Slip Hex Shank - For positive grip in chuck
-
- Induction hardened head for durability
- Claw design for nail extraction
- Fibreglass Handle
- Lifetime Warranty
-
- Diamond coating for long life
- Cut-out slots to dissipate heat
- Made to international standard thread pattern to accept all arbors
-
- Metric, Imperial & Fractional Measurements
- Four Way Measurement: Internal, External, Depth, Step
- Large & Clear LCD Readout Screen
- Thumb Roll for Accurate Measurements
- Includes Protection Case
-
- SDS+ fitment
- Suits any drill with a SDS+ chuck
- Ideal for mixing plaster, adhesives, render and paint
-
- Anti-drip technology produces less mess and cleanup
- Variable speed dial for enhanced control
- Puncture tool for unsealing tubes
- Powered by any 18V ONE+ battery
- Accepts 300ml caulk tubes
-
- Tool-tether ready for increased safety when working at height
- Over-moulded handle and grip areas to give enhanced ergonomics, grip and comfort
- Light weight of less the 2kg allows comfortable, all day use
- Ultra-compact form makes easy work of accessing confined workspaces
-
- Applications – Stainless steel, steel, alloys, brass, copper, cast iron & corrugated sheeting.
- 1mm Thickness for quick cutting – Combine the best everyday use with the ability to cut sheet metal faster, minimising discolouration and debris.
- Complies with EN12413 and Australian Standard AS 1788:1-1997.
-
- Designed for all Operators and Users of Elevated Work Platforms (EWPs) such as Scissor Lifts, Boom Lifts and Forklift Safety Cages
- Provides good value without compromising safety
- The kit includes a Universal Harness and a 2.0m Energy Absorbing Lanyard
-
- Drop forged head
- Strong fibreglass handle
- Anti-slip grip for safe use
-
- 6.35mm Quick connect chuck
- 150Nm of torque
- Variable speed reversing
- Tri-beam LED work-light
- Uses 18V lithium ion battery (not included)
-
- Connectable accessory storage system to optimise storage space
- Extended FLEXTORQ Torision Zone* transfers optimal torque
- CNC-machined bit tip for precise fit in screw heads for reducing cam-out
-
- Class 5
- SLC(80) 29.2dB
- Conforms to AS/NZS 1270:2002
- Ultra Lightweight Compact Folding Frame
- Ideal for High Noise Environments
-
- 3 easy to read vials (horizontal & vertical 45°)
- Tough internal aluminium frame and base
- Plumbing, tiling, general use
- Lifetime Warranty
-
- 50mm Max Jaw Width
- 15 Degree Jaw Angle
- Soft Grip Handle
-
- 2-speed gearbox
- 24 clutch settings
- 13mm ratcheting chuck
- In-built LED work light
-
- Superior performance and life
- Thin cutting aluminium oxide
- Suitable for stainless steel applications
- Suitable for cordless and corded tools
- Bulk 10 Pack
-
- Two speed fan switch enables dual temperatures
- Front heat shield allows for direct heat flow
- Flat base for upright use
- Inbuilt thermal overload protection shuts the product down if the element gets too hot
- Rear handle hook for upright use and for hanging when not in use
-
- Adjustable height for cleaning of sensitive & non-sensitive surfaces
- The surface cleaner hovers over the floor and guarantees easy cleaning.
- Quicker cleaning of decks, pavers, driveways and even walls
- Excellent area performance – ideal for cleaning larger areas.
-
- Fires clipped-head framing nails (2.87-3.33 mm)
- Framing nail range: 50-90mm
- Depth adjustment knob to control depth of fire
- Magazine capacity: 70 nails
- Includes nitto-style fitting
-
- Works best with impact drivers, hammer drills
- Carbide head
- High volume head
- ¼” hex shank
-
- Remote Control: Works up to 100m away for precise accurate setup (fine adjust, laser lines on/off and beam brightness
- Laser Movement/Fine Adjustment Controls: Move the laser left/right/up/down, short press for 1 step movement, long press for continuous with speed ramping up every 2 seconds to 3 speeds
- Beam Brightness Adjustment: Adjust up to 3 levels of brightness to suit the light levels on the jobsite
- High Visibility 3x360 Green Beam Diodes: Ensures better beam visibility on the jobsite up to 80m and 100m with detector
- Position Switch: Manual Slope/Self Level/Pendulum Lock
-
- Pack includes: 12 x 125mm Metal Cut Off Discs, Storage Tin
- Engineered for cutting non-ferrous metals, steel and stainless steel
- Inox-free (doesn’t contain iron, sulphur, chlorine)
- 125mm x 1mm disc size
- Suitable for use with angle grinders
-
- 6.35 & 12.7mm collet capacity for a variety of different cutters
- Depth stop rod for setting the precise depth of cut (up to 55mm)
- Micro depth control knob adjusts the fine depth
- Pre select speed via regulator dial for ultimate control
- Dust port can be connect to a dust extraction system
-
- Integrated finger break for ultimate control, ensuring more controlled measurements and longer tape life
- Double-sided blade print facilitates awkward or overhead measurements
- Improved blade durability
- Greater reach: 25mm blade width and extended reach of 3.5 metres
- Durable, rubber over-moulded case to help withstand multiple drops at the job site
-
- Deep impact rated sockets convenient in high torque applications
- 33 Impact rated bits
- Made from Hardened Chrome Molybdenum (Cr-Mo)
- Metric sizing
- Machined tin case with PCV tray
-
- For trimming and edging panels, cutting grooves or intricate patterns
- 6 speed variable control
- Geared micro depth adjustment
- Clear guide window
