Fasteners & Fixings

Pinnacle M6 x 35mm Black Ruspert® Round Head Bolts And Nuts - 6 Pack
- M6 metric thread size x 35mm length
- Round head with hex insert
- Black Ruspert® finish
- Pack of 6
- Thread pitch: 1mm
FJD $6.02
Zenith 8G x 25mm Tufcote® Countersunk Rib Head Treated Pine Screws - 35 Pack
- Designed to outperform galvanised coated fasteners in treated timber.
- Coarse thread provides maximum grip.
- Ribbed head allows efficient countersinking.
- Threads per inch - 10
FJD $7.26
Titan 6G x 30mm PH2 Plasterboard Screw - 40 Pack
- For fixing plasterboard/ drywall sheets into timber and light gauge metal surfaces
- Bugle head designed to spin into plasterboard without tearing surface paper
- Sharp self-drilling needle point tip cuts into timber and thin metal up to 1.0mm
- Zinc Gold material with fine thread
- No.2 Phillips Head Drive
FJD $7.26
Paslode 50 x 2.8mm 100g Galvanised Bullet Head Nails - 30 Pack
- Good corrosion protection
- External use
- Plain shank
FJD $8.91
Pinnacle M8 x 50mm Black Ruspert® Round Head Bolts And Nuts - 4 Pack
- M8 metric thread size x 50mm length
- Round head with hex insert
- Black Ruspert® finish
- Pack of 4
- Thread pitch: 1.25mm
FJD $7.85
Ramset 8 x 100mm Galvanised AnkaScrew Masonry Anchor - 2 Pack
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
FJD $10.84
Zenith 10G x 50mm Zinc Plated Countersunk Head Wood Screws - 15 Pack
- Traditional multipurpose wood screws
- Countersunk head for flush finish
- Pre-drill pilot hole for both shank and thread
FJD $7.31
Ramset 6.5 x 25mm Mushroom Head Nylon Anchor - 25 Pack
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Mushroom head
- Nylon body provides insulation between drive screw and work surface
FJD $10.79
Paslode 30 x 2.0mm 100g Galvanised Bullet Head Nail - 100 Pack
- Good corrosion protection
- General purpose timber to timber use
- Plain shank
- External use
FJD $8.91
Ramset 8 x 16mm Ramtoggle Pack - 20 Pack
- Wide wingspan for maximum holding power
- Anti-rotation fins prevent spinning in the hole when installing the screw
- Low-profile head allows for flush fixing
- Nylon body is non-conductive
FJD $27.66
Zenith 8G x 50mm Tufcote® Countersunk Rib Head Treated Pine Screws - 20 Pack
- Designed to outperform galvanised coated fasteners in treated timber.
- Coarse thread provides maximum grip.
- Ribbed head allows efficient countersinking.
- Threads per inch - 10
FJD $7.31
Paslode 40 x 2.0mm 100g Galvanised Bullet Head Nail - 80 Pack
- Good corrosion protection
- General purpose timber to timber use
- Plain shank
- External use
FJD $8.91
Zenith Assorted Nickel Plated Brass Snap Fastener Screw Kit With Tool
- Nickel plated brass for external use
- Female and Male components
- Setting tool included
FJD $17.99
Zenith 8G x 25mm Galvanised Countersunk Head Timber Screws - 30 Pack
- Zenith trusted quality at competitive prices
- Galvanised for external use
- Easy to use
FJD $7.95
Pinnacle M6 x 75mm Black Oxide Socket Head Cap Screw - 4 Pack
- M6 metric thread size x 75mm length
- Socket head
- Matte black
- Pack of 4
- Thread pitch: 1mm
FJD $8.29
Paslode 30 x 1.6mm 100g Zinc Plated Hard Board Nail - 175 Pack
- Countersunk head
- Use for fixing dense compressed internal linings
- Internal use
FJD $8.91
Paslode 75 x 3.75mm 100g Bright Steel Flat Head Nails - 13 Pack
- Large head to prevent pull through
- Use in thin material for crates, pallets, cases
- Drill pilot hole when using in hardwood
- Internal use
FJD $8.26
Ramset 10 x 50mm Anchor RamPlug - 20 Pack
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Suitable for use with 14 - 18 gauge screws
FJD $20.30
Richmond M10 x 60mm Hand Bolt
- Black bakelite head
- Zinc plated M10 x 60mm thread
- Five lobes provide better grip allowing a greater level of pressure to be applied.
FJD $5.72
Zenith 10G x 30mm Zinc Plated Countersunk Head Wood Screws - 25 Pack
- Zenith trusted quality at competitive prices
- Countersunk head for flush finish
- Pre-drill pilot hole for both shank and thread
FJD $7.31
Paslode 20 x 1.6mm 100g Zinc Plated Hard Board Nail - 250 Pack
- Countersunk head
- Use for fixing dense compressed internal linings
- Internal use
FJD $8.91
Ramset M5 x 9mm Plasterboard Hollow Wall Anchor - 4 Pack
- Low profile head allows for low profile fixing
- Light duty
- Easy to install
FJD $13.27
Otter 4.0 x 6.4mm Large Flange Aluminium Rivets - 25 Pack
- Larger head for increased holding power
- Strong vibration resistance and clamping force
- Lightweight and easy to use
- Good corrosion resistance
- Cost effective
FJD $7.28
Pinnacle M6 x 100mm Stainless Steel Security Bolts - 4 Pack
- Round head
- Stainless steel 304
- Pack of 4
- Includes Torx® driver bit
- Thread pitch: 1mm
FJD $11.21
Zenith 10G x 50mm Tufcote® Countersunk Rib Head Treated Pine Screws - 18 Pack
- Designed to outperform galvanised coated fasteners in treated timber.
- Coarse thread provides maximum grip.
- Ribbed head allows efficient countersinking.
- Threads per inch - 8
FJD $7.31
Paslode 50 x 3.2mm 100g Concrete Nails - 27 Pack
- Use when fixing timber into concrete or brick
- Helical shank for greater holding power
- Internal use
FJD $5.77
Ramset 10 x 75mm Stainless Steel DynaBolt Plus Hex Head Bolt - 2 Pack
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Unique "pull-down" section
FJD $26.13
Paslode 40 x 2.0 100g Galvanised Flat Head Nails - 80 Pack
- Good corrosion protection
- Large head to prevent pull through
- Use in thin material for crates, pallets, cases, fencing
- External use
- Drill pilot hole when using in hardwood
FJD $8.91
GRIPIT

GripIt 20mm Brown Plasterboard Fixing - 4 Pack
- Holds up to 50kg on 10mm plasterboard
- Fit in under 20 seconds
- Reusable and recyclable
- Ideal for: AV equipment, light fittings, cabinets and bathroom suites.
FJD $11.90
Pinnacle M5 x 90mm Stainless Steel Hex Head Bolts And Nuts - 4 Pack
- M5 metric thread size x 90mm length
- Hex head
- Stainless steel 316
- Pack of 4
- Thread pitch: 0.8mm
FJD $7.57
Ramset 14g x 55mm Black Ankascrew - 10 Pack
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
FJD $11.63
Paslode 50 x 2.8mm 100g Galvanised Flat Head Nails - 35 Pack
- Good corrosion protection
- Large head to prevent pull through
- Use in thin material for crates, pallets, cases, fencing
- External use
- Drill pilot hole when using in hardwood
FJD $8.91
Zenith 10G x 65mm Tufcote® Countersunk Rib Head Treated Pine Screws - 12 Pack
- Designed to outperform galvanised coated fasteners in treated timber.
- Coarse thread provides maximum grip.
- Ribbed head allows efficient countersinking.
- Threads per inch - 8
FJD $7.26
Pinnacle M8 x 100mm Yellow Zinc Hi Tensile Hex Bolt And Nut - 2 Pack
- Metric Thread Size M8 x Thread Length 100mm
- Yellow Zinc
- Pack of 2
- Hex head
- Thread pitch: 1.25mm
FJD $7.18
Buildex 8G x 12mm SS316 Self Tapping Sheet Metal Screws - 50 Pack
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Engineered with marine-grade 316 stainless steel, offering exceptional protection against corrosion in harsh and coastal applications.
- The countersunk head ensures a flush, streamlined finish, making it ideal for applications where a smooth surface is essential.
- Manufactured with high-grade materials for maximum corrosion protection, making it ideal for use in coastal and marine environments.
FJD $18.10
Paslode 25 x 1.4mm 100g Zinc Plated Wallboard Nails - 240 Pack
- Use when fixing wallboard to timber framing
- Zinc plated
- Internal use
FJD $8.91

Products

Cart

Your cart is empty

Fasteners & Fixings