Fasteners & Fixings

Skip to results list
Availability
Category
Showing 36 of 2477 results

Sort By

Filters

Availability
Category
Brand
  • Bremick MultiONE 8g x 40mm B8 Contour Head Screw - 40 Pack
    BREMICK

    Bremick MultiONE 8g x 40mm B8 Contour Head Screw - 40 Pack

    • Countersunk truss head for use where a flush finish is needed e.g. in timber or in a pre-countersunk fitting
    • T20 Torx compatible drive for positive bit engagement provides maximum application of torque
    • B8® coating lasts 4x longer than galvanising and more than double the corrosion protection of conventional class 4 in category 5 environments
    • Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc.
    • Complies with AS 3566-2002
  • Cobra 4 x 50mm Driller Toggle Anchor Screws - 6 Pack
    COBRA

    Cobra 4 x 50mm Driller Toggle Anchor Screws - 6 Pack

    • Fast & easy to install.
    • Self-drilling anchors, no pre-drilling required.
    • All you need is a screwdriver.
    • Strong holding power.
  • Otter Deep Ocean® 3.2 x 0.8-4.8mm Multi-Grip Open Aluminium Blind Rivets - 100 Pack
    OTTER

    Otter Deep Ocean® 3.2 x 0.8-4.8mm Multi-Grip Open Aluminium Blind Rivets - 100 Pack

    • Strong vibration resistance and clamping force
    • Designed for use in pre coloured roofing, guttering, downpipes, sheds, garages and fencing
    • Wide clamping range 0.8mm to 4.8mm
    • Lightweight and easy to set
  • Otter 3.2 x 12.7mm Open Steel Blind Rivets - 100 Pack
    OTTER

    Otter 3.2 x 12.7mm Open Steel Blind Rivets - 100 Pack

    • High vibration resistance and clamping force
    • Stronger than aluminium
    • Zinc plated finish
    • Ideal for most steel sheet metal fabrications
  • Otter 4.8 x 15.9mm Large Flange Aluminium Rivets - 25 Pack
    OTTER

    Otter 4.8 x 15.9mm Large Flange Aluminium Rivets - 25 Pack

    • Larger head for increased holding power
    • Strong vibration resistance and clamping force
    • Lightweight and easy to use
    • Good corrosion resistance
    • Cost effective
  • Bremick MultiONE 8g x 30mm B8 Contour Head Screw - 50 Pack
    BREMICK

    Bremick MultiONE 8g x 30mm B8 Contour Head Screw - 50 Pack

    • Countersunk truss head for use where a flush finish is needed e.g. in timber or in a pre-countersunk fitting
    • T20 Torx compatible drive for positive bit engagement provides maximum application of torque
    • B8® coating lasts 4x longer than galvanising and more than double the corrosion protection of conventional class 4 in category 5 environments
    • Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc.
    • Complies with AS 3566-2002
  • Pinnacle M6 x 45mm Stainless Steel Security Bolts - 8 Pack
    PINNACLE

    Pinnacle M6 x 45mm Stainless Steel Security Bolts - 8 Pack

    • Flat head
    • Stainless steel 304
    • Pack of 8
    • Includes Torx® driver bit
    • Thread pitch: 1mm
  • Everhang M10 x 80mm Zinc Plated Hanger Bolt - 4 Pack
    EVERHANG

    Everhang M10 x 80mm Zinc Plated Hanger Bolt - 4 Pack

    • Item is threaded or attached on the opposing end and a nut is added
    • Zinc plated for added durability
    • Made from high quality materials for added strength
    • Use in a pre-drilled hole
    • All Everhang Hanger Bolts suit a CRV T25 Star Drive bit
  • Otter Pale Eucalypt® 3.2 x 0.8-4.8mm Multi-Grip Open Aluminium Blind Rivet - 100 Pack
    OTTER

    Otter Pale Eucalypt® 3.2 x 0.8-4.8mm Multi-Grip Open Aluminium Blind Rivet - 100 Pack

    • Superior vibration resistance and clamping force
    • Designed for use in pre coloured roofing, guttering, downpipes, sheds, garages and fencing
    • Wide clamping range 0.8mm to 4.8mm
    • Lightweight and easy to set
  • Otter 3.2 x 6.4mm Sealed Aluminium Blind Rivets - 100 Pack
    OTTER

    Otter 3.2 x 6.4mm Sealed Aluminium Blind Rivets - 100 Pack

    • High vibration resistance and clamping force
    • Provide a watertight or pressure tight seal
    • Good corrosion resistance
    • 5056 polished aluminium
  • Buildex 6G x 30mm Gold Passivated Plasterboard Screws (Dual Type-17 Tip) - 100 Pack
    BUILDEX

    Buildex 6G x 30mm Gold Passivated Plasterboard Screws (Dual Type-17 Tip) - 100 Pack

    • Dual Type-17 tip delivers strong self-drilling performance in both timber and thin metal. It pierces timber up to 2x faster with reduced timber splitting.
    • Gold passivation adds a durable protective layer over zinc plating, enhancing corrosion resistance while providing a clean, distinctive finish that improves visibility and surface durability.
    • The gently tapered bugle head spreads load over a wider area, reducing surface damage and pull-through for a smooth, flush finish.
  • Simpson Strong-Tie 10 x 38mm Black Outdoor Accents Hex Screw - 50 Box
    SIMPSON STRONG-TIE

    Simpson Strong-Tie 10 x 38mm Black Outdoor Accents Hex Screw - 50 Box

    • Use with Outdoor Accents decorative hardware for an appealing look
    • 1/4" hex head reduces cam-out for easier installation and helps avoid stripping of the head during installation (1/4" hex drive included)
    • Optimised heat treating for ductility and strength
    • Black double-barrier coating provides premium look while providing a medium level of corrosion protection for many outdoor applications
    • Decorative Finish
  • Everhang M8 x 100mm Zinc Plated Hanger Bolt - 4 Pack
    EVERHANG

    Everhang M8 x 100mm Zinc Plated Hanger Bolt - 4 Pack

    • Item is threaded or attached on the opposing end and a nut is added
    • Zinc plated for added durability
    • Made from high quality materials for added strength
    • Use in a pre-drilled hole
    • All Everhang Hanger Bolts suit a CRV T25 Star Drive bit
  • Bremick MultiONE 10g x 40mm B8 Contour Head Screw - 35 Pack
    BREMICK

    Bremick MultiONE 10g x 40mm B8 Contour Head Screw - 35 Pack

    • Countersunk truss head for use where a flush finish is needed e.g. in timber or in a pre-countersunk fitting
    • T20 Torx compatible drive for positive bit engagement provides maximum application of torque
    • B8® coating lasts 4x longer than galvanising and more than double the corrosion protection of conventional class 4 in category 5 environments
    • Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc.
    • Complies with AS 3566-2002
  • Pinnacle M8 x 100mm Stainless Steel Security Bolts - 4 Pack
    PINNACLE

    Pinnacle M8 x 100mm Stainless Steel Security Bolts - 4 Pack

    • Flat Head
    • Stainless Steel 304
    • Pack of 4
    • Includes Torx® driver bit
    • Thread pitch: 1.25mm
  • Pinnacle M12 x 50mm Yellow Zinc Hi Tensile Hex Bolt And Nut - 2 Pack
    PINNACLE

    Pinnacle M12 x 50mm Yellow Zinc Hi Tensile Hex Bolt And Nut - 2 Pack

    • Metric Thread Size M12 x Thread Length 50mm
    • Yellow Zinc
    • Pack of 2
    • Hex Head
    • Thread pitch: 1.75mm
  • Ramset M5 x 9mm Hollow Wall Anchor - 10 Pack
    RAMSET

    Ramset M5 x 9mm Hollow Wall Anchor - 10 Pack

    • Low profile head allows for low profile fixing
    • Large flange prevents the head from pulling into the substrate
    • Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
    • Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity
  • Pinnacle Assorted Anti-Theft Screws - 50 Pack
    PINNACLE

    Pinnacle Assorted Anti-Theft Screws - 50 Pack

    • Zinc plated
    • Anti-theft security
    • Number plate screws
    • Pack of 50
    • Pack includes: 42 x 10G screws, 8 x 12G screws
  • Quickfix for Ekodeck 3mm Standard Clips - 15 Pack
    QUICKFIX

    Quickfix for Ekodeck 3mm Standard Clips - 15 Pack

    • Suitable for timber and metal (steel and aluminium) joists
    • 15 x Standard Clips and stainless steel screws for 3mm system
    • Standard Clips should be placed on every joist, except where a Locking Clip is placed
  • Pinnacle 12 x 25mm Yellow Zinc Hi Tensile Hex Bolt And Nut - 4 Pack
    PINNACLE

    Pinnacle 12 x 25mm Yellow Zinc Hi Tensile Hex Bolt And Nut - 4 Pack

    • High tensile
    • Yellow zinc
    • 4 pack
    • Thread pitch: 1.75mm
  • Pinnacle 10 x 75mm Yellow Zinc Hi Tensile Hex Bolt And Nut - 2 Pack
    PINNACLE

    Pinnacle 10 x 75mm Yellow Zinc Hi Tensile Hex Bolt And Nut - 2 Pack

    • High Tensile
    • Yellow Zinc
    • 2 Pack
    • Thread pitch: 1.5mm
  • Otter 3.2 x 9.6mm Open Steel Blind Rivets - 100 Pack
    OTTER

    Otter 3.2 x 9.6mm Open Steel Blind Rivets - 100 Pack

    • High vibration resistance and clamping force
    • Stronger than aluminium
    • Zinc plated finish
    • Ideal for most steel sheet metal fabrications
  • Otter 3.2 x 4.8mm Sealed Aluminium Blind Rivets - 100 Pack
    OTTER

    Otter 3.2 x 4.8mm Sealed Aluminium Blind Rivets - 100 Pack

    • High vibration resistance and clamping force
    • Provide a watertight or pressure tight seal
    • Good corrosion resistance
    • 5056 polished aluminium
  • Bremick MultiONE 8g x 40mm B8 Countersunk Truss Head Screw - 60 Pack
    BREMICK

    Bremick MultiONE 8g x 40mm B8 Countersunk Truss Head Screw - 60 Pack

    • Countersunk truss head for use where a flush finish is needed e.g. in timber or in a pre-countersunk fitting
    • T20 Torx compatible drive for positive bit engagement provides maximum application of torque
    • B8® coating lasts 4x longer than galvanising and more than double the corrosion protection of conventional class 4 in category 5 environments
    • Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc.
    • Complies with AS 3566-2002
  • Pinnacle M10 x 120mm Stainless Steel Hex Head Bolt And Nut - 2 Pack
    PINNACLE

    Pinnacle M10 x 120mm Stainless Steel Hex Head Bolt And Nut - 2 Pack

    • M10 metric thread size x 120mm length
    • 316 Marine grade stainless steel
    • Pack of 2
    • Thread pitch: 1.5mm
  • Otter 3.2 x 7.9mm Open Steel Blind Rivets - 100 Pack
    OTTER

    Otter 3.2 x 7.9mm Open Steel Blind Rivets - 100 Pack

    • High vibration resistance and clamping force
    • Stronger than aluminium
    • Zinc plated finish
    • Ideal for most steel sheet metal fabrications
  • Otter 3.2 x 6.4mm Open Steel Blind Rivets - 100 Pack
    OTTER

    Otter 3.2 x 6.4mm Open Steel Blind Rivets - 100 Pack

    • High vibration resistance and clamping force
    • Stronger than aluminium
    • Zinc plated finish
    • Ideal for most steel sheet metal fabrications
  • Cobra 5 x 75mm Screws/Bit Anchor DrillerToggle - 30 Pack
    COBRA

    Cobra 5 x 75mm Screws/Bit Anchor DrillerToggle - 30 Pack

    • Fast and easy to install
    • Self-drilling anchors, no pre-drilling required
    • All you need is a screwdriver
    • Strong holding power
  • VUEPRO M12 90-110mm Heavy Duty Concealed Thread Bolt - 2 Pack
    VUEPRO

    VUEPRO M12 90-110mm Heavy Duty Concealed Thread Bolt - 2 Pack

    • Suitable for a variety of applications
    • Used in various applications
    • Concealed finish for premium post supports
    • Heavy Duty 12.5mm Shaft
  • Pinnacle M6 x 35mm Stainless Steel Security Bolts - 8 Pack
    PINNACLE

    Pinnacle M6 x 35mm Stainless Steel Security Bolts - 8 Pack

    • Flat head
    • Stainless steel 304
    • Pack of 8
    • Includes Torx® driver bit
    • Thread pitch: 1mm
  • Otter Manor Red® 3.2 x 0.8-4.8mm Multi-Grip Open Aluminium Blind Rivet - 100 Pack
    OTTER

    Otter Manor Red® 3.2 x 0.8-4.8mm Multi-Grip Open Aluminium Blind Rivet - 100 Pack

    • Superior vibration resistance and clamping force
    • Designed for use in pre coloured roofing, guttering, downpipes, sheds, garages and fencing
    • Wide clamping range 0.8mm to 4.8mm
    • Lightweight and easy to set
  • ZENITH M12 x 150mm Stainless Steel 304 Grade Hex Head Bolts & Nuts
    ZENITH

    ZENITH M12 x 150mm Stainless Steel 304 Grade Hex Head Bolts & Nuts

    • Hexagonal head allows for increased clamping pressure
    • Coarse thread allows for maximum grip strength in applications
    • Hexagonal nuts included
    • Made to BOLT: DIN 931, NUT: DIN 934 Standards
  • Tox Fasteners 48mm Polystyrene EPS Washer - 100 Box
    HAKO

    Tox Fasteners 48mm Polystyrene EPS Washer - 100 Box

    • Used to hold EPS & XPS polystyrene to timber frame
    • 48mm diameter for extra hold
    • White colour to match polystyrene panels
    • UV stable material
  • Otter Dune® 3.2 x 0.8-4.8mm Multi-Grip Open Aluminium Blind Rivets - 100 Pack
    OTTER

    Otter Dune® 3.2 x 0.8-4.8mm Multi-Grip Open Aluminium Blind Rivets - 100 Pack

    • Superior vibration resistance and clamping force
    • Designed for use in pre coloured roofing, guttering, downpipes, sheds, garages and fencing
    • Wide clamping range 0.8mm to 4.8mm
    • Lightweight and easy to set
  • Ramset 5 x 20mm Shuredrive Pack - 20 Pack
    RAMSET

    Ramset 5 x 20mm Shuredrive Pack - 20 Pack

    • Hammer-in method makes installation quick and easy
    • Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange
    • Once fully set, the ShureDrive™ becomes tamper resistant
    • Large flange prevents pull-out
  • Bremick MultiONE 10g x 50mm B8 Contour Head Screw - 25 Pack
    BREMICK

    Bremick MultiONE 10g x 50mm B8 Contour Head Screw - 25 Pack

    • Countersunk truss head for use where a flush finish is needed e.g. in timber or in a pre-countersunk fitting
    • T20 Torx compatible drive for positive bit engagement provides maximum application of torque
    • B8® coating lasts 4x longer than galvanising and more than double the corrosion protection of conventional class 4 in category 5 environments
    • Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc.
    • Complies with AS 3566-2002