Fasteners & Fixings

Bremick 12g x 20mm B8 Metal Hex Screw - 50 Pack
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Fine Thread for greater stronger holding strength and resistance to pull-out in thin or soft metals
- SDM Point for drilling into steel while ensuring maximum pullout strength and a high strip torque
- For fastening into metal up to 5mm
FJD $29.29
BREMICK

Bremick XTP Construction Screw 18g x 125mm TECHNOGUARD TAN T40 - 25 Pack
- Precision T40 Drive resists cam out
- Large Washer Head for greater clamping force
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® provides an instant drive
FJD $46.00
Buildex 10G x 22mm Gold Passivated Sheet Metal Screws - 100 Pack
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Gold passivation adds a durable protective layer over zinc plating, enhancing corrosion resistance while providing a clean, distinctive finish that improves visibility and surface durability.
- The broad, low-profile wafer head offers maximum surface contact for excellent clamping force and reduced pull-through in sheet materials.
- Designed for interior use, this screw provides reliable fixing into metal.
FJD $20.81
Paslode 40 x 2.8 250g Fibre Cement Stainless Steel Nails - 110 Pack
- Ultimate corrosion protection
- Ideal for use in walls and fences
- External use
FJD $28.79
BREMICK

Bremick XTP Construction Screw 18g x 100mm TECHNOGUARD TAN T40 - 25 Pack
- Precision T40 Drive resists cam out
- Large Washer Head for greater clamping force
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® provides an instant drive
FJD $38.31
BREMICK

Bremick XTP Construction Screw 18g x 75mm TECHNOGUARD TAN T40 -25 Pack
- Precision T40 Drive resists cam out
- Large Washer Head for greater clamping force
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® provides an instant drive
FJD $32.17
Bremick XTP 14g x 50mm T40 Technoguard Bugle Batten - 25 Pack
- Precision T40 Drive resists cam out
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® drives instantly
FJD $16.83
Buildex 8G x 38mm SS316 Self Tapping Sheet Metal Screws - 100 Pack
- Needle point tip starts fast and drives clean, meaning no pre-drilling needed, resulting in a quick and easy installation.
- Engineered with marine-grade 316 stainless steel, offering exceptional protection against corrosion in harsh and coastal applications.
- The pan head design offers a broad bearing surface, increasing holding strength and reducing the risk of pull-through
- Manufactured with high-grade materials for maximum corrosion protection, making it ideal for use in coastal and marine environments.
FJD $32.48
Paslode 25 x 2.0mm 250g Stainless Steel Fibre Cement Nails - 330 Pack
- Ultimate corrosion protection
- Ideal for use in walls & fences
- External use
FJD $35.03
Zenith 10G x 30mm Zinc Plated Hinge-Long Thread Countersunk Head Timber Screws - 100 Pack
- Countersunk Head for flush finish
- No ribs for flush finish through metal e.g. Hinges
- Suitable for attaching hinges and general timber applications
FJD $21.07
Buildex 12-11 x 50mm Climaseal Hex Head Timber Screws - 25 Pack
- General purpose Type 17 external timber screw
- Hex head
- Part thread
- Galvanised steel
FJD $20.00
Paslode 30 x 2.0mm 250g Stainless Steel Fibre Cement Nails - 290 Pack
- Ultimate corrosion protection
- Ideal for use in walls & fences
- External use
FJD $28.79
Otter 4.8 x 3.2mm Open Steel Blind Rivets - 100 Pack
- High vibration resistance and clamping force
- Stronger than aluminium
- Zinc plated finish
- Ideal for most steel sheet metal fabrications
FJD $19.87
Pinnacle M12 x 150mm Stainless Steel Hex Head Bolt And Nut - 2 Pack
- M12 metric thread size x 150mm length
- 316 Marine grade stainless steel
- Pack of 2
- Thread pitch: 1.75mm
FJD $29.80
Otter 4.8 x 4.8mm Countersunk Open Aluminium Rivets - 100 Pack
- Countersunk head for flush finish
- Strong vibration resistance and clamping force
- Aluminium body with steel mandrel
- Pack of 100 rivets
FJD $11.40
DELF ARCHITECTURAL

Delf 15mm Green Builders Wedge - 25 Pack
- Serrated surface for non-slip performance.
- Won't rust or rot
- Can be sawn, drilled, nailed or chiseled
- Can be used singularly or in combination
- Packaged in a box of 25
FJD $21.34
Otter 4.8 x 6.4mm Open Stainless Steel Blind Rivets - 100 Pack
- Superior vibration resistance and clamping force
- Ideal for most sheet metal fabrications
- Excellent tolerance to corrosion
- 316 Grade stainless steel body and mandrel
FJD $35.86
Ramset 8 x 80mm Long RamPlug - 100 Pack
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Countersunk sleeve allows for flush finishing.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 10 - 14 gauge screws.
FJD $78.92
Ramset 10 x 80mm Ultra-Long Anchor RamPlug - 10 Pack
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Complete with countersunk screw for a flush finish
FJD $23.29
Zenith 1/4" x 38mm Mushroom Head Bolt And Nut - 25 Pack
- Imperial sizing
- Mushroom head for a smooth rounded finish
- Zinc plated suitable for internal use and areas not subject to direct weather
FJD $8.98
Pinnacle 5 x 10mm Yellow Zinc Hi Tensile Hex Bolt And Nut - 10 Pack
- High tensile
- Yellow zinc
- Pack of 10
- Thread pitch: 0.8mm
FJD $4.03
Paslode 50 x 2.8mm 250g Stainless Steel Bullet Head Nails - 90 Pack
- Ultimate corrosion protection
- General purpose timber to timber use
- Plain shank
- External use
FJD $28.50
Titan 10G x 50mm Weather Force Wide Head Decking Screw - Pack of 50
- Designed specifically for Decking applications
- Countersunk Wide head providing strong hold and flush finish
- Weather Force corrossion protection
- T25 Drive (Bit included) with Type 17 Point for quick clean installation
- Suitabel for both Soft and Hardwood varieties
FJD $13.12
Zenith 1/4" x 50mm Zinc Plated Mushroom Head Bolt And Nut - 25 Pack
- Imperial sizing
- Mushroom head for a smooth rounded finish
- Zinc plated suitable for internal use and areas not subject to direct weather
FJD $10.70
Paslode 50 x 2.8mm 250g Stainless Steel Flat Head Nails - 90 Pack
- Ultimate corrosion protection
- Large head to prevent pull through
- External use
- Drill pilot hole when using in hardwood
FJD $28.79
Titan 4mm Blue Deck Spacers - 100 Pack
- Durable plastic 4mm spacing tool
- Ideal for uniform spacing between decking, tiles, and paving
- High visual "Titan" Blue so they are easy to see
FJD $16.78
Pinnacle M20 Galvanised Hex Coupler
- Thread diameter: metric M20
- Galvanised
- Thread pitch: 2.5mm
- Complies to Australian standard AS1275
FJD $10.14
Paslode 40 x 2.0mm 250g Bullet Head Stainless Steel Nails - 225 Pack
- Ultimate corrosion protection
- General purpose timber to timber use
- Plain shank
- External use
- Bullet Head
FJD $28.50
Ramset 20 x 115mm DynaBolt Plus Hex Nut Masonry Anchor
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- unique "pull-down" section
FJD $9.59
DELF ARCHITECTURAL

Delf 10mm Blue Builders Wedge - 35 Pack
- Serrated surface for non-slip performance.
- Won't rust or rot
- Can be sawn, drilled, nailed or chiseled
- Can be used singularly or in combination
- Packaged in a box of 35
FJD $22.13
Titan 10G x 50mm Weather Force Deck Treated Pine Screw - 100 Pack
- Designed specifically for Decking applications
- Countersunk Trim head with nibs for flush finish
- Weather Force corrossion protection
- # 2 Square Drive (Bit included) with Type 17 Point for quick clean installation
- Suitable for Softwood and ACQ Treated Timbers
FJD $24.84
Titan 12G x 65mm Decking Bugle Stainless Steel 304 - Pack of 25
- Designed specifically for Decking applications
- Countersunk Wide Bugle head providing strong hold and flush finish
- 304 Stainless Steel
- 4mm Hex Drive (Bit included) head with Type 17 Point for quick clean installation
- Suitabel for both Soft and Hardwood varieties
FJD $20.44
Zenith 8G x 30mm Florentine Bronze Hinge-Long Thread Timber Screws - 100 Pack
- Countersunk head for flush finish
- No ribs for flush finish through metal
- Suitable for attaching hinges and general timber applications
FJD $23.37
Ramset 10 x 80mm Ultra-Long Hex Anchor RamPug - 10 Pack
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Complete with hex head screw for a easy installation
FJD $30.64
Bremick XTP 14g x 75mm Black T40 Technoguard Bugle Batten - 25 Pack
- Precision T40 Drive resists cam out
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® drives instantly
FJD $19.95
Zenith 10 - 8 x 75mm Galvanised Countersunk Rib Head External Timber Screws - 10 Pack
- Zenith trusted quality at competitive prices
- Coarse thread provides maximum grip
- Galvanised for external use
FJD $6.72

Products

Cart

Your cart is empty

Fasteners & Fixings