Fasteners & Fixings
Sort Best selling
Showing 36 of 2434 results
-
- 316 Stainless Steel – durable, corrosion resistant, and suitable for use in coastal or high corrosion environments
- Use to fasten VUEPRO Stainless Steel Timber Connectors
- 645 nails per kg
- Available in 500g packs
- Size 30mm x 2.8mm
-
- Good corrosion protection
- Large head to prevent pull through
- Use in thin material for crates, pallets, cases, fencing
- External use
- Drill pilot hole when using in hardwood
-
- Precision T25 Drive resists cam out and provides greater control
- Self Embedding head cuts fibre cement for flush finishing
- Serrated needle point for fast installation
- For fastening into timber or metal up to 0.6mm
- Free Bit Included
-
- General purpose timber to timber use
- Plain shank
- Internal use
-
- General purpose timber to timber use
- Plain shank
- Internal use
-
- Good corrosion protection
- Ideal for use in walls & fences
- External use
-
- Good corrosion protection
- Specially designed thread
- Landscaping and decking spikes
- External use
-
- Large head to prevent pull through
- Use in thin material for crates, pallets, cases
- Drill pilot hole when using in hardwood
- Internal use
-
- Good corrosion protection
- Used for non-structural work
- Can be used for shade cloth and plastic trellis'
- External use
- Clouts
-
- General purpose timber to timber use
- Plain shank
- Internal use
- Bullet Head
-
- Annular shank for greater holding power
- Lattice & sunk head for holding filler and paint
- Countersunk for flush finish
- Internal use
-
- Good corrosion protection
- Used for non-structural work
- Can be used for shade cloth and plastic trellis'
- External use
- Clouts
-
- Can be used in cloth and wire applications
- Exterior use
- Double ended nail
-
- Can be used in cloth and wire applications
- Exterior use
- Double ended nail
-
- Large head to prevent pull through
- Use in thin material for crates, pallets, cases
- Drill pilot hole when using in hardwood
- Internal use
-
- Use in plywood sheets or soft linings like cabinetwork
- Internal use
- Zinc plated
-
- Can be used in cloth and wire applications
- Exterior use
- Double ended nail
-
- Good corrosion protection
- General purpose timber to timber use
- Plain shank
- External use
- Bullet Head
-
- Exterior use
- Double ended nail
- Trusted Paslode quality
-
- Good corrosion protection
- Large head to prevent pull through
- Use in thin material for crates, pallets, cases, fencing
- Drill pilot hole when using in hardwood
- External use
-
- Longer, thicker and stronger than galvanised clouts
- Tapered head and one piece construction for greater strength
- Specifically for fixing
-
- Annular shank for greater holding power
- Use for fixing underlay to timber
- Internal use
-
- Type 17 point features a cutting flute for fast, clean starts in timber, reducing the risk of splitting.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
- This product comes as a pack of 100 screws.
-
- These SuperTEKS® Series 500 metal screws can be used for fixing into thick steels up to 12mm.
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Class 3 galvanisation provides advanced corrosion protection, ensuring reliable performance and extended service life in exposed conditions.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets. A hex head paired with a sealing washer provides high-torque drive and a durable, weather-tight seal.
- Designed for exterior use, this screw provides strong, reliable fixing into metal with corrosion-resistant coating for long-lasting performance outdoors.
-
- Complies with AS 3566-2002
- Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc
- T20 Torx compatible drive for positive bit engagement provides maximum application of torque
-
- Complies with AS 3566-2002
- Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets
- Countersunk truss head for use where a flush finish is needed e.g. in timber or in a pre-countersunk fitting
-
- 316 Grade Stainless Steel
- Australian Standard AS1275
- Metric Rod - 1.2 Metre Length
- Can be used with standard metric nuts and washers
-
- Complies with AS 3566-2002
- T20 Torx compatible drive for positive bit engagement provides maximum application of torque
- Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc
-
- Type 17 point features a cutting flute for fast, clean starts in timber, reducing the risk of splitting.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
- This product comes as a pack of 100 screws.
-
- Suitable for securing upholstery, cladding, lining, insulation and sheeting
- Electro-galvanised coating for corrosion resistance and increased durability
- 21-gauge size
- 12.8mm crown width
- Made from carbon steel
-
- Dual Type-17 tip delivers strong self-drilling performance in both timber and thin metal. It pierces timber up to 2x faster with reduced timber splitting.
- Gold passivation adds a durable protective layer over zinc plating, enhancing corrosion resistance while providing a clean, distinctive finish that improves visibility and surface durability.
- The gently tapered bugle head spreads load over a wider area, reducing surface damage and pull-through for a smooth, flush finish.
- Reliable fixing into timber with strong grip and smooth drive for professional results.
-
- High tensile
- Yellow zinc
- Pack of 6
- Thread pitch: 1.25mm
-
- Serrated Sharp Thread
- Over 2x Faster*
- Pyramid Point®
-
- Complies with AS 3566-2002
- T25 Torx compatible drive for positive bit engagement provides maximum application of torque
- Contour head for use when a broad holding power &/or decorative look is required. The underside of the head is flat and ideal for fixing sheet materials or heavier timbers.
-
- Complies with AS 3566-2002
- T25 Torx compatible drive for positive bit engagement provides maximum application of torque
- Contour head for use when a broad holding power &/or decorative look is required. The underside of the head is flat and ideal for fixing sheet materials or heavier timbers.
-
- Complies with AS 3566-2002
- T25 Torx compatible drive for positive bit engagement provides maximum application of torque
- Contour head for use when a broad holding power &/or decorative look is required. The underside of the head is flat and ideal for fixing sheet materials or heavier timbers.
