General Fasteners
Sort Best selling
Showing 36 of 303 results
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Mushroom head
- Nylon body provides insulation between drive screw and work surface
-
- Imperial sizing
- Mushroom head for a smooth rounded finish
- Zinc plated suitable for internal use and areas not subject to direct weather
-
- Imperial sizing
- Mushroom head for a smooth rounded finish
- Zinc plated suitable for internal use and areas not subject to direct weather
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- Mushroom head.
- Nylon body provides insulation between drive screw and work surface.
-
- Imperial sizing
- Mushroom head for a smooth rounded finish
- Zinc plated suitable for internal use and areas not subject to direct weather
-
- For those odd jobs around home
- Value for money
- Great assortment
-
- Handy kit
- For all those odd jobs
- 383 assorted fasteners
-
- Great value
- Stainless steel
- Reinforced head
-
- 316 Stainless Steel – durable, corrosion resistant, and suitable for use in coastal or high corrosion environments
- Use to fasten VUEPRO Stainless Steel Timber Connectors
- 645 nails per kg
- Available in 500g packs
- Size 30mm x 2.8mm
-
- Longer, thicker and stronger than galvanised clouts
- Tapered head and one piece construction for greater strength
- Specifically for fixing
-
- Manufactured from Carbon Steel
- ZMAX® galvanisation with black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- Optimised heat treating for ductility and strength
- Decorative Finish
- Install with Outdoor Accents structural screws and hex-head washer for decorative look (sold separately)
-
- Designed for use with Pryda Timber Connectors
- The self‑drilling point and full compatibility with impact drivers help speed up installation while ensuring consistent embedment and holding power.
- A colour‑coded head and distinctive black PR marking provide instant visual confirmation of screw type and length, reducing errors on busy job sites.
- Galvanised Class 3 coating offers long‑lasting corrosion protection for structural applications.
- Tested & Accredited
-
- Faster installation, less torque and requires no pre-drilling
- Use with Outdoor Accents decorative hardware and hex-head washer for an appealing look
- Combined with the Outdoor Accents structural wood washers, it provides a structural load-rated solution
- Black double-barrier coating provides premium look while providing a medium level of corrosion protection for many outdoor applications
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
-
- Stamped Screw Head - For easy identification and certification
- Wide Thread - High resistance to withdrawal
- Large Diameter Head - Superior hold down strength
- Slotted Tip - For quicker start, reduced splitting & reduced driving force
-
- Maximum grip.
- Australian made.
- Expansion Tie for brick/ACC block masonry wall expansion gaps of 10-20mm
- R Rating R2
- Provides correct control gap.
-
- Maximum grip
- Australian made
- Expansion Tie for brick/ACC block masonry wall expansion gaps of 10-20mm
- Manufactured to conform to a corrosion resistance for R4 for use in coastal or industrial areas as required in AS2699 & AS3700
-
- M5 (10g) diameter
- 125mm length for use in timber
- Use to hold polystyrene to timber frames
- Galvanised for outdoor use
-
- Longer, thicker and stronger than galvanised clouts
- Tapered head and one piece construction for greater strength
- Specifically for fixing of all Pryda bracings and timber connectors
-
- Designed and tested to conform to Australia's stringent Brick Tie Code AS2699
- Australian made
- Medium Duty: To suit 50mm cavity between brickwork and timber or steel frame
- Manufactured to conform to a corrosion resistance for R4 for use in coastal or industrial areas as required in AS2699 and AS3700
- Supplied with 4.5 x 30mm screws
-
- Made in Australia
- Manufactured from Quality Galvanised Z600
- Rated R2 Light Duty
- Includes Hex Screw
- For Steel Frames
-
- Designed and tested to conform to Australia's stringent Brick Tie Code AS2699
- Australian made.
- Light Duty: To suit 50mm cavity between brickwork and timber or steel frame.
- Manufactured to conform to a corrosion resistance for R4 for use in coastal or industrial areas as required in AS2699 & AS3700.
- Supplied with 3.2 x 40mm wood weld nails.
-
- Stamped Screw Head - For easy identification and certification
- Wide Thread - High resistance to withdrawal
- Large Diameter Head - Superior hold down strength
- Slotted Tip - For quicker start, reduced splitting & reduced driving force
-
- Retrofittable, made of 2 parts that can be fixed after services have been installed
- Adjustable, ability to use on both the top and bottom of the wall plate where required
- Strong enough to reinforce holes anywhere along the top plate
- Minimises the cost of rework
-
- Designed and tested to conform to Australia's stringent Brick Tie Code AS2699
- Australian made.
- Medium Duty: To suit 50mm cavity between brickwork and timber or steel frame.
- R Rating R2
- Supplied with 4.5 x 30mm screws.
-
- Manufactured in Australia
- G300 minimum steel grade
- Z275 minimum corrosion protection
-
- Manufactured in Australia
- G300 Minimum steel grade
- Z275 minimum corrosion protection
-
- Suitable for framing application in accordance with AS1684.2 and AS1684.3
- 316 Stainless Steel – durable, corrosion resistant, and suitable for use in coastal or high corrosion environments
- Versatile bracket – simply bend to your needs!
- Australian Made - High quality, peace of mind, and supporting Aussie jobs
-
- Quick and easy to install
- Made from Galvabond® sheet steel for high resistance to corrosion
- Satisfies the minimum specification of clause 1.15 of AS1684 part 2 and 3, and clause 1.14 of AS1684.4.
-
- Round head
- Stainless steel 304
- Pack of 8
- Includes Torx® driver bit
- Thread pitch: 1mm
-
- Hammer-in method makes installation quick and easy.
- Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange.
- Once fully set, the ShureDrive™ becomes tamper resistant.
- Large flange prevents pull-out.
-
- Use for many nail fixed timber joints
- Made from Galvabond® sheet steel for high resistance to corrosion
- Satisfies the minimum specification of clause 1.15 of AS1684 part 2 and 3, and clause 1.14 of AS1684.4
-
- Use for many nail fixed timber joints
- Made from Galvabond® sheet steel for high resistance to corrosion
- Satisfies the minimum specification of clause 1.15 of AS1684 part 2 and 3, and clause 1.14 of AS1684.4
-
- Australian made
- Maximises protection of homes against termites
- Manufactured in accordance with AS3660-1993
- Available for concrete or timber stumps
-
- Pryda Multigrips suitable for high load applications such as a tie-down connector for trusses or rafters to top plates for fixing joists to the face of bearers
- Manufactured from G300-Z275 galvanised steel or marine grade stainless steel.
- Trusted Pryda quality
-
- M8 metric thread size x 40mm length
- 316 Marine Grade Stainless Steel
- Pack of 4
- Thread pitch: 1.25mm
