Hollow Wall Anchors
Sort Best selling
Showing 36 of 151 results
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing
-
- Heavy Duty hollow wall anchor
- Great for hanging TV brackets
- Made in Germany
- Easy to install
- M6 bolts included
-
- 6mm Tungsten Carbide Drill Bit
- 10 x 35mm Red Wall Plugs
- 10 x 35mm 6G Screws
-
- Wide wingspan for maximum holding power
- Anti-rotation fins prevent spinning in the hole when installing the screw
- Low-profile head allows for flush fixing
- Nylon body is non-conductive
-
- 8mm Tungsten Carbide Drill Bit
- 10 x 50mm Blue Wall Plugs
- 10 x 50mm 10G Screws
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Suitable for use with 14 - 18 gauge screws
-
- Holds up to 50kg on 10mm plasterboard
- Fit in under 20 seconds
- Reusable and recyclable
- Ideal for: AV equipment, light fittings, cabinets and bathroom suites.
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Easy to install
- Superior holding power
- 2 expandable wings that grip tight behind drywall
- 2 lateral wings hold the anchor in place, preventing any rotation while the screw is inserted
-
- Suitable for walls 10 to 16mm thick
- Combination Head for easy installation
- Yellow Zinc Plated
- Suitable for Plasterboard, Masonite & Plywood
- Holds up to 10kg
-
- Holds up to 60kg on 10mm plasterboard
- Fit in under 20 seconds
- Reusable and recyclable
- Ideal for: wall-mounted TVs, heaters, AC units and kitchen cupboards.
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- A wide, flat collar with collapsible sleeve design, ensures tight fixing
- Nylon body provides insulation between drive screw and work surface
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Light duty nylon anchor
-
- Easy to install
- Superior holding power
- 2 expandable wings that grip tight behind drywall
- 2 lateral wings hold the anchor in place, preventing any rotation while the screw is inserted
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- A wide, flat collar with collapsible sleeve design, ensures tight fixing
- Nylon body provides insulation between drive screw and work surface
-
- Fast & easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- A wide, flat collar with collapsible sleeve design, ensures tight fixing
- Nylon body provides insulation between drive screw and work surface
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Suitable for use with 18 - 24 gauge screws
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
- Up to 10kg
-
- Fast & easy to install.
- Self-drilling anchors, no pre-drilling required.
- All you need is a screwdriver.
- Strong holding power.
-
- Low profile head allows for low profile fixing
- Large flange prevents the head from pulling into the substrate
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity
-
- Fast and easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- Metal wing cavity
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Light duty nylon anchor
-
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws.
- Includes 8g phillips head screws designed to secure fixtures up to 15mm thick
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
-
- Fast & easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Suitable for use with 14 - 18 gauge screws
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Suitable for use with 10 - 14 gauge screws
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
- Up to 10kg
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
- Strong holding power, up to 26kg into solid substrate and up to 7kg into hollow wall
- Trusted Ramset quality
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Countersunk sleeve allows for flush finishing.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 10 - 14 gauge screws.
-
- One green Gripit self drive holds up to 20kg
- Innovative cam prevents overtightening
- Easy to install and remove for reuse
-
- Fast & easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
