Hollow Wall Anchors
Sort Best selling
Showing 36 of 151 results
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- One green Gripit self drive holds up to 20kg
- Innovative cam prevents overtightening
- Easy to install and remove for reuse
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Hammer-in method makes installation quick and easy.
- Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange.
- Once fully set, the ShureDrive™ becomes tamper resistant.
- Large flange prevents pull-out.
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
- Strong holding power, up to 32kg into solid substrate and up to 11kg into hollow wall
- Trusted Ramset quality
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Quick and easy installation.
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws.
- Low profile head allows for flush fixing. Non-conductive.
- Easy to remove without losing any part of the anchor inside the wall cavity.
- Includes 8g phillips head screws designed to secure fixtures up to 15mm thick
-
- Self-drilling toggle anchor for heavy duty, vibration resistant fixing in plasterboard
- Effective drill point for easy penetration of plasterboard and fast installation
- The screw thread profile is designed for efficient cutting and positive grip
- Both the screw and the ToggleMate™ can be easily removed without losing the anchor inside the cavity.
- Low profile head allows for flush fixing.
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Countersunk sleeve allows for flush finishing.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 6 - 9 gauge screws.
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Countersunk sleeve allows for flush finishing.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 6 - 9 gauge screws.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 8-9 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 14-16 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 14-16 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 14-16 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a convenient re-sealable trade pack
- Trusted Ramset quality
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Trusted Ramset quality
-
- Hammer-in method makes installation quick and easy.
- Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange.
- Once fully set, the ShureDrive™ becomes tamper resistant.
- Large flange prevents pull-out.
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Low profile head allows for low profile fixing.
- Large flange prevents the head from pulling into the substrate.
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole.
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Low profile head allows for low profile fixing
- Large flange prevents the head from pulling into the substrate
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 14-16 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Quick and easy installation. Installs with a basic #2 Phillips head screw driver
- Effective drill point for easy penetration of plasterboard. Splits and spreads for added hold.
- Easy to remove without losing any part of the anchor inside the wall cavity.
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Self-drilling toggle anchor for heavy duty, vibration resistant fixing in plasterboard
- Effective drill point for easy penetration of plasterboard and fast installation
- The screw thread profile is designed for efficient cutting and positive grip
- Both the screw and the ToggleMate™ can be easily removed without losing the anchor inside the cavity
- Low profile head allows for flush fixing
-
- Quick and easy installation
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws
- Low profile head allows for flush fixing. Non-conductive
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
-
- Quick and easy installation - Mini size for limited cavity space
- Effective drill point for easy penetration of plasterboard - Break away drill point to accommodate long screws
- Low profile head allows for flush fixing - Non-conductive
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic number two phillips head screw driver
-
- Threaded Metal Plug that sell drills / taps into plasterboard
- Holds up to 10kgs
- Flush finish
- Ideal for fixing clocks, smoke detectors, small pictures
-
- Easy to use
- Suitable for all sizes and lengths of Ramset™ Hollow Wall Anchors
- Check weight restrictions for objects to be secured to the plasterboard on the Hollow Wall Anchor packaging
-
- Quick and easy installation.
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws.
- Low profile head allows for flush fixing. Non-conductive.
- Easy to remove without losing any part of the anchor inside the wall cavity.
- Includes 8g phillips head screws designed to secure fixtures up to 15mm thick.
