Ramset
Sort Most relevant
Showing 36 of 344 results
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Low profile head allows for low profile fixing
- Large flange prevents the head from pulling into the substrate
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 14 - 18 gauge screws.
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Round head
- Nylon body provides insulation between drive screw and work surface
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Quick and easy installation. Mini size for limited cavity space
- Effective drill point for easy penetration of plasterboard. Break away drill point accommodates long screws
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
-
- Quick and easy installation
- Effective drill point for easy penetration of plasterboard and softwood studs.
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Mushroom head
- Nylon body provides insulation between drive screw and work surface
-
- Wide wingspan for maximum holding power
- Anti-rotation fins prevent spinning in the hole when installing the screw
- Low-profile head allows for flush fixing
- Nylon body is non-conductive
-
- Low profile head allows for low profile fixing
- Large flange prevents the head from pulling into the substrate
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 4-6 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Light duty
- Suitable for use with 18 - 24 gauge screws
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Round head
- Nylon body provides insulation between drive screw and work surface
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Quick and easy installation. Mini size for limited cavity space
- Effective drill point for easy penetration of plasterboard
- Break away drill point to accommodate long screws
- Low profile head allows for flush fixing
- Installs with a basic #2 Phillips head screw driver
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 8-9 gauge screws
- Ramset™ wall plugs are available in a handy polybag
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Mushroom head
- Nylon body provides insulation between drive screw and work surface
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Suitable for use with 6 - 9 gauge screws
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- Countersunk head for a finish flush with the fixture.
- Nylon body provides insulation between drive screw and work surface.
-
- Non conductive nylon body.
- Light duty
- screw for plasterboard
-
- Wide wingspan for maximum holding power
- Anti-rotation fins prevent spinning in the hole when installing the screw
- Low-profile head allows for flush fixing
- Nylon body is non-conductive
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Round head
- Nylon body provides insulation between drive screw and work surface
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Countersunk head provides a neat finish, flush with the fixture surface
-
- Wide wingspan for maximum holding power
- Anti-rotation fins prevent spinning in the hole when installing the screw
- Low-profile head allows for flush fixing
- Nylon body is non-conductive
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Eye Bolt Head provides convenient anchor point for tying.
- Unique "pull-down" section
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 8-9 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- Metal wing cavity
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Mushroom head
- Nylon body provides insulation between drive screw and work surface
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Easy to use
-
- Hammer-in method makes installation quick and easy
- Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange
- Once fully set, the ShureDrive™ becomes tamper resistant
- Large flange prevents pull-out
-
- Uses gravity and clamping force to anchor light-weight fittings to plasterboard walls.
- Lack of a protruding flange allows for flush fixing.
- Light Duty
-
- Quick and easy installation
- Effective drill point for easy penetration of plasterboard. Break away drill point accommodates long screws
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
-
- Manufactured from ductile, high strength material to avoid breakage
- Plain shank
- Designed for hand hammer
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Easy to use
