Ramset
Sort Most relevant
Showing 36 of 276 results
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- Metal wing cavity
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Mushroom head
- Nylon body provides insulation between drive screw and work surface
-
- Tapered at one end for quick and easy insertion
- Economical roll
- Suitable for 8 - 9 gauge screws
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- A wide, flat collar with collapsible sleeve design, ensures tight fixing
- Nylon body provides insulation between drive screw and work surface
-
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws.
- Includes 8g phillips head screws designed to secure fixtures up to 15mm thick
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Light duty nylon anchor
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Light duty nylon anchor
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- A wide, flat collar with collapsible sleeve design, ensures tight fixing
- Nylon body provides insulation between drive screw and work surface
-
- Tapered at one end for quick and easy insertion.
- Economical roll.
- Suitable for 10 - 12 gauge screws.
-
- Can be used in hollow or solid applications
- Have a hex head for easy driving into the chemical
- Minimum embedment lines for maximum results
- Galvanised for corrosion protection
-
- Tapered at one end for quick and easy insertion
- Economical roll
- Suitable for 14 - 16 gauge screws
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
- Up to 10kg
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- Saw tooth thread makes it easy to drive and unscrew
- Mushroom head
- Nylon body provides insulation between drive screw and work surface
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- Easy to install and remove
- Superior clamping force
- Close to edge fixing
-
- Easy to install and remove
- Superior clamping force
- Close to edge fixing
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- Mushroom head.
- Nylon body provides insulation between drive screw and work surface.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- Mushroom head.
- Nylon body provides insulation between drive screw and work surface.
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Complete with countersunk screw for a flush finish
-
- Can be used in hollow or solid applications
- Hex head for easy driving into the chemical
- Minimum embedment lines for maximum results
- Galvanised for corrosion protection
-
- Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
- Strong holding power, up to 26kg into solid substrate and up to 7kg into hollow wall
- Trusted Ramset quality
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Countersunk sleeve allows for flush finishing.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 10 - 14 gauge screws.
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Complete with hex head screw for a easy installation
- Supplied with galvanised screw for increased corrosion protection in external applications
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- Mushroom head.
- Nylon body provides insulation between drive screw and work surface.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Complete with hex head screw for a easy installation
- Supplied with galvanised screw for increased corrosion protection in external applications
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- Mushroom head
- Nylon body provides insulation between drive screw and work surface
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
