Wall & Floor Anchors
Sort Best selling
Showing 36 of 329 results
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Trusted Ramset quality
-
- Hammer-in method makes installation quick and easy.
- Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange.
- Once fully set, the ShureDrive™ becomes tamper resistant.
- Large flange prevents pull-out.
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Low profile head allows for low profile fixing.
- Large flange prevents the head from pulling into the substrate.
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole.
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Unique "pull-down" section
-
- Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
- Strong holding power, up to 32kg into solid substrate and up to 11kg into hollow wall
- Trusted Ramset quality
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 14-16 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Quick and easy installation. Installs with a basic #2 Phillips head screw driver
- Effective drill point for easy penetration of plasterboard. Splits and spreads for added hold.
- Easy to remove without losing any part of the anchor inside the wall cavity.
-
- Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
- Strong holding power, up to 26kg into solid substrate and up to 7kg into hollow wall
- Trusted Ramset quality
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Close to edge fixing
- Close to anchor fixing
- Easy to install and remove
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Self-drilling toggle anchor for heavy duty, vibration resistant fixing in plasterboard
- Effective drill point for easy penetration of plasterboard and fast installation
- The screw thread profile is designed for efficient cutting and positive grip
- Both the screw and the ToggleMate™ can be easily removed without losing the anchor inside the cavity
- Low profile head allows for flush fixing
-
- Patented "pull-down" mechanism
- Fully assembled through-fixture anchor
- Provides excellent corrosion resistance
- Eliminates marking out and re-positioning of fixtures, making installation fast and easy
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Quick and easy installation
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws
- Low profile head allows for flush fixing. Non-conductive
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Quick and easy installation - Mini size for limited cavity space
- Effective drill point for easy penetration of plasterboard - Break away drill point to accommodate long screws
- Low profile head allows for flush fixing - Non-conductive
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic number two phillips head screw driver
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
-
- Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
- Strong holding power, up to 32kg into solid substrate and up to 11kg into hollow wall
- Trusted Ramset quality
-
- Threaded Metal Plug that sell drills / taps into plasterboard
- Holds up to 10kgs
- Flush finish
- Ideal for fixing clocks, smoke detectors, small pictures
-
- Light duty fixing into brick, concrete or plasterboard
- Box of 40
- Supports up to 26kg in concrete and 7kg in plasterboard
-
- Easy to use
- Suitable for all sizes and lengths of Ramset™ Hollow Wall Anchors
- Check weight restrictions for objects to be secured to the plasterboard on the Hollow Wall Anchor packaging
-
- Quick and easy installation.
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws.
- Low profile head allows for flush fixing. Non-conductive.
- Easy to remove without losing any part of the anchor inside the wall cavity.
- Includes 8g phillips head screws designed to secure fixtures up to 15mm thick.
-
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a convenient re-sealable trade pack
- Trusted Ramset quality
-
- Quick and easy installation
- Effective drill point for easy penetration of plasterboard. Break away drill point accommodates long screws
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
-
- Close to edge fixing
- Close to anchor fixing
- Easy to install and remove
-
- Quick and easy installation
- Effective drill point for easy penetration of plasterboard. Splits and spreads for added hold.
- Low profile head allows for flush fixing. Non-conductive.
- Easy to remove without losing any part of the anchor inside the wall cavity.
- Installs with a basic #2 Phillips head screw driver.
-
- Quick and easy installation.
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws.
- Low profile head allows for flush fixing. Non-conductive.
- Easy to remove without losing any part of the anchor inside the wall cavity.
- Includes 8g phillips head screws designed to secure fixtures up to 15mm thick.
