Wall & Floor Anchors
Sort Best selling
Showing 36 of 379 results
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Complete with hex head screw for a easy installation
- Supplied with galvanised screw for increased corrosion protection in external applications
-
- Can be used in hollow or solid applications
- Hex head for easy driving into the chemical
- Minimum embedment lines for maximum results
- Galvanised for corrosion protection
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Complete with hex head screw for a easy installation
-
- Fast & easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Unique "pull-down" section
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
-
- One green Gripit self drive holds up to 20kg
- Innovative cam prevents overtightening
- Easy to install and remove for reuse
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Expansion anchor with internal thread
- Follow up expansion in case of overloading
- Yellow zinc plated steel
- Suitable for concrete, brick, block and stone
-
- Expansion anchor with internal thread
- Follow up expansion in case of overloading
- Yellow zinc plated steel
- Suitable for concrete, brick, block and stone
-
- Expansion anchor with internal thread
- Follow up expansion in case of overloading
- Yellow zinc plated steel
- Suitable for concrete, brick, block and stone
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Hammer-in method makes installation quick and easy.
- Full expansion of the anchor is evident when the head of the expansion nail sits flush with the flange.
- Once fully set, the ShureDrive™ becomes tamper resistant.
- Large flange prevents pull-out.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Cut to length as required
- 50 metre roll
- Easy to use
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Suitable for use with Ramset™ powder actuated tools.
- For fastening to standard strength concrete, masonry and steel up to a maximum of 8mm.
- 1200N/mm2 Shear Strength.
- 1950N/mm2 Shear Strength.
- 52-55HRC Hardness.
-
- Suitable to anchor into stone, concrete, solid brick, hollow wall and hollow brick
- Strong holding power, up to 32kg into solid substrate and up to 11kg into hollow wall
- Trusted Ramset quality
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Suitable for use with Ramset™ powder actuated tools.
- For fastening to standard strength concrete, masonry and steel up to a maximum of 8mm.
- 1200N/mm2 Shear Strength.
- 1950N/mm2 Shear Strength.
- 52-55HRC Hardness.
-
- Quick and easy installation.
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws.
- Low profile head allows for flush fixing. Non-conductive.
- Easy to remove without losing any part of the anchor inside the wall cavity.
- Includes 8g phillips head screws designed to secure fixtures up to 15mm thick
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- M10 size
- Medium duty female threaded anchors
- For use in concrete & lightweight solid masonry materials
- Setting tool punches are available
- Yellow Zinc plated finish
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Easy to use knock in expansion anchor.
- Suitable for fastening timber battens or subflooring to concrete.
- Countersunk head for flush finish.
- Galvanised for corrosion resistance.
- Available in 5 different lengths.
-
- Easy to use knock in expansion anchor
- Suitable for fastening timber battens or subflooring to concrete
- Countersunk head for flush finish
- Galvanised for corrosion resistance
- Available in 5 lengths
-
- High performance Grade 5.8 carbon steel, pre-cut to standard chemical anchoring lengths and supplied with nuts and washers
- Gold passivated, zinc plated for indoor or dry climates
- Depth set mark to ensure correct embedment
- Reliable external hex drive for installing with capsules.
- Chisel-ended to prevent unthreading.
-
- Self-drilling toggle anchor for heavy duty, vibration resistant fixing in plasterboard
- Effective drill point for easy penetration of plasterboard and fast installation
- The screw thread profile is designed for efficient cutting and positive grip
- Both the screw and the ToggleMate™ can be easily removed without losing the anchor inside the cavity.
- Low profile head allows for flush fixing.
