Wall & Floor Anchors
Sort Best selling
Showing 36 of 379 results
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Easy to install
- Superior holding power
- 2 expandable wings that grip tight behind drywall
- 2 lateral wings hold the anchor in place, preventing any rotation while the screw is inserted
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Hex Bolt provides a low profile finish without a protruding thread
-
- 5.8 Grade Steel
- Galvanised finish
- Eye Bolt Head for convenient anchoring point
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Countersunk sleeve allows for flush finishing.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Complete with hex head screw for a easy installation.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Tapered at one end for quick and easy insertion
- Economical roll
- Suitable for 4.5 - 6 gauge screws
-
- Medium to high tension capacity
- Medium to high shear capacity
- Simple installation
-
- Medium to high tension capacity
- Medium to high shear load capacity
- Simple installation
- Manufactured from 5.8 grade steel
- 40Mu galvanised finish
-
- Medium to high tension capacity
- Medium to high shear load capacity
- Simple installation
-
- Medium to high tension capacity
- Medium to high shear load capacity
- Simple installation
- Manufactured from 5.8 grade steel
- 40Mu galvanised finish
-
- Suitable for walls 10 to 16mm thick
- Combination Head for easy installation
- Yellow Zinc Plated
- Suitable for Plasterboard, Masonite & Plywood
- Holds up to 10kg
-
- Easy Clip On or Hammer Installation
- Tensioned / Spring loaded Metal Clip
- Suitable for 16 - 20mm wiring / cabling
-
- Galvanised finish
- T40 Torx Drive
- Quick and easy installation
- A removable fastener
-
- Medium to high tension capacity
- Medium to high shear load capacity
- Simple installation
-
- Medium to high tension capacity
- Medium to high shear load capacity
- Simple installation
-
- Holds up to 60kg on 10mm plasterboard
- Fit in under 20 seconds
- Reusable and recyclable
- Ideal for: wall-mounted TVs, heaters, AC units and kitchen cupboards.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Unique "pull-down" section
-
RAMSETRamset Hole Cleaning Pump
- Suitable for blowing dust from drilled holes.
- cleaning dust and debris from holes
- Easy to use
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- A wide, flat collar with collapsible sleeve design, ensures tight fixing
- Nylon body provides insulation between drive screw and work surface
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Light duty nylon anchor
-
- Easy to install
- Superior holding power
- 2 expandable wings that grip tight behind drywall
- 2 lateral wings hold the anchor in place, preventing any rotation while the screw is inserted
-
- Tapered at one end for quick and easy insertion.
- Economical roll.
- Suitable for 10 - 12 gauge screws.
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Unique "pull-down" section
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- A wide, flat collar with collapsible sleeve design, ensures tight fixing
- Nylon body provides insulation between drive screw and work surface
-
- Can be used in hollow or solid applications
- Have a hex head for easy driving into the chemical
- Minimum embedment lines for maximum results
- Galvanised for corrosion protection
-
- Fast & easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
-
- Tapered at one end for quick and easy insertion
- Economical roll
- Suitable for 8 - 9 gauge screws
-
- Quick and easy to install and remove
- Can be hammered all the way into the hole without pre-expansion
- The drive screw’s saw tooth thread makes it easy to drive and unscrew
- A wide, flat collar with collapsible sleeve design, ensures tight fixing
- Nylon body provides insulation between drive screw and work surface
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Suitable for use with 18 - 24 gauge screws
-
- Solid Steel punch
- Available in the sizes M8 / M10 / M12
- Use punch to match size of Drop In Anchor
- Ensures anchor is fully engaged and flush
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing cavity
- Up to 10kg
-
- Fast & easy to install.
- Self-drilling anchors, no pre-drilling required.
- All you need is a screwdriver.
- Strong holding power.
-
- Low profile head allows for low profile fixing
- Large flange prevents the head from pulling into the substrate
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity
