Wall & Floor Anchors
Sort Best selling
Showing 36 of 329 results
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Hex Bolt provides a low profile finish without a protruding thread
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Easy to use
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Easy to use
-
- Close to edge fixing
- Superior clamping force
- Easy to install and remove
-
- Utility Anchor M6x32mm for use in all Masonry substrates
- Use in Hebel, Brick, Concrete and other masonry substrates
- Ideal for conduit and pipe installations
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors
- Light duty nylon anchor
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Suitable for use with 18 - 24 gauge screws
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- 7mm Tungsten Carbide Drill Bit
- 10 x 25mm Green Wall Plugs
- 10 x 25mm 8G Screws
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Easy to use
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- unique "pull-down" section
-
- 4 part expansion anchor
- External cogs for string grip in substrates
- Internal rib design for secure course thread screw guidance
- Used for water, gas, conduit, pipe, electrical and HVACR installations
- Can be knocked into Hebel or Nasahi (porous aerated concrete) without predrilling
-
- Quick and easy installation.
- Effective drill point for easy penetration of plasterboard. Break away drill point accommodates long screws.
- Low profile head allows for flush fixing.
- Easy to remove without losing any part of the anchor inside the wall cavity.
- Installs with a basic #2 Phillips head screw driver.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Self-drilling toggle anchor for heavy duty, vibration resistant fixing in plasterboard.
- Effective drill point for easy penetration of plasterboard and fast installation.
- The screw thread profile is designed for efficient cutting and positive grip
- Both the screw and the ToggleMate™ can be easily removed without losing the anchor inside the cavity.
- Low profile head allows for flush fixing.
-
- 5.8 Grade Steel
- Galvanised finish
- Hook Bolt Head for added anchoring point
-
- 7mm Tungsten Carbide Drill Bit
- 10 x 50mm Green Wall Plugs
- 10 x 50mm 8G Screws
-
- 5.8 Grade Steel
- Galvanised finish
- Hook Bolt Head for added anchoring point
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- unique "pull-down" section
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications.
- Lack of a protruding flange allows for flush fixing.
- metal wing cavity
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Hex Bolt provides a low profile finish without a protruding thread.
-
- Round hook profile.
- Metal wing cavity
- Ideal for both wall and ceiling applications
-
- Utility Anchor M8x60mm used for conduit, pipe, electrical, HVACR installations
- Use in all masonry substrates including Hebel, brick, concrete, hollow and solid block
- Galvanised steel with rigid sides for use with course thread screws
- 4 way divided expansion body
- Used for water, gas, conduit, pipe, electrical and HVACR installations
-
- All in one anchor expansion anchor with galvanised torx drive screw & sleeve anchor
- Through anchor allows attaching frames, battens and brackets to base substrates like brick, block or concrete
- Use in porous aerated concrete (Hebel) and knock directly into base
- Use in all solid masonry substrates like concrete, brick & block by pre-drilling
- Unique heavy duty metal tip
-
- M8x38mm metal anchor
- Use in hebel, concrete, block, timber, brick
- Ideal for fixing water, gas, electrical, conduit and pipe to masonry substrates like brick and concrete
- Ideal for use in HVACR industry for fixing installlations
-
- Self-drilling fine point to guide anchor into wall.
- Sharp cutting edge for easy installation.
- Provides extra holding power in dry wall applications.
- Strong holding power of a toggle bolt anchor.
- Load limit 15kg (10mm Plasterboard) / 50kg (13mm Plasterboard)
-
- All in 1 expansion anchor includes galvanised torx drive screw and sleeve anchor
- Use in Hebel or Nasahi cladding (porous aerated concreted) and knock directly in with hammer (no pre-drilling)
- Use in all solid masonry substrates like concrete, brick and block with pre-drilling
- Through anchor can fasten frames, battens and brackets to base substrates
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Cut to length as required.
- Light duty anchoring in concrete, stone, solid brick and solid block
- For use with 3 - 3.5mm nails or 4.5 - 6 gauge screws
-
- Plaster fastening kit
- Multipurpose 8mm Drill Bit
- 6-8 x 32mm Metal Wall anchors
- Suits materials with 6mm thickmess
-
- Wide wingspan gives high loadings in both plasterboard wall and ceiling applications
- Lack of a protruding flange allows for flush fixing
- Metal wing
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Heavy Duty hollow wall anchor
- Great for hanging TV brackets
- Made in Germany
- Easy to install
- M6 bolts included
