Fasteners & Fixings
Sort Best selling
Showing 36 of 2434 results
-
- ZIP® point drives fast and seats flush, pulling the head tight for a neat, professional finish without surface damage.
- Versatile design for strong, reliable fixing into both metal and timber, ideal for mixed-material applications.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
-
- Hot-dipped galvanised coating to provide long-term protection.
- Suitable for severe external environments.
- Designed and engineered to Australian National Construction Code (NCC).
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Shank Protector enlarges the hole cut into the roof sheet sufficiently to minimise abrasion of the coating
- Type 17 Point for drilling into timber while ensuring maximum pullout strength and a high strip torque
- For fastening into timber (softwood and hardwood)
-
- 15° angle
- Hot Dipped Galvanized
- Diamond Point
- Plastic collated
- Ring Shank
-
- Diameter: 16 Gauge / 1.6mm
- Angle: 20°
- Electro galvanized
- Chisel point to reduce timber splitting
-
- More versatile for a greater range of applications
- Accommodate a wide range of beams widths - 45mm to 90mm
- Rounded corners, no sharp edges making it safer to handle
- Universal design that is easy and faster to install
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- 5/16" Hex Drive system for compatibility with the most common drive socket
- High quality point ensures fast and reliable drilling into metal
- SDM Point for drilling into steel while ensuring maximum pullout strength and a high strip torque
- For fastening to metal up to 5mm
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Complies with AS 3566-2002
- T30 Torx compatible drive for positive bit engagement provides maximum application of torque
- Contour head for use when a broad holding power &/or decorative look is required. The underside of the head is flat and ideal for fixing sheet materials or heavier timbers.
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Top Grip provides a positive seal and reduces the roof sheet riding down
- SDM Point for drilling into steel while ensuring maximum pullout strength and a high strip torque
- For fastening into metal up to 5mm
-
- Designed to outperform galvanised coated fasteners in treated timber.
- Coarse thread provides maximum grip.
- Ribbed head allows efficient countersinking.
- Threads per inch - 10
-
- Multipurpose packers/spacers for windows, doors and other leveling solutions.
- UV Stable and will not expand or shrink
- High compressive strenghth (capacity up to 5 tonnes)
- Manufactured using Durable high quality plastic
- Bevelled leg end for easy installation
-
- Longer life of the fastener, longer life of the project
- 50% stronger than 10G equivalent. Coarser thread makes it even faster to install.
- No pre-drilling. Fast Bite Point for a quick start.
-
- Precision T40 Drive resists cam out and provides greater control
- Bugle Head embeds cleanly for a flush finish
- Robust 14g construction for strong performance and durability
- For fastening into metal up to 5mm
- Free Bit Included
-
- Suitable for holding trim, moulding, flooring underlay, upholstery and fabric
- Electro-galvanised coating provides corrosion resistance and increased durability
- 18 gauge size
- 5.7mm crown width, 22mm length
- Made from carbon steel
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Dual Type-17 tip delivers strong self-drilling performance in both timber and thin metal. It pierces timber up to 2x faster with reduced timber splitting.
- Gold passivation adds a durable protective layer over zinc plating, enhancing corrosion resistance while providing a clean, distinctive finish that improves visibility and surface durability.
- The gently tapered bugle head spreads load over a wider area, reducing surface damage and pull-through for a smooth, flush finish.
-
- Dual Type 17 Tip that pierces timber up to 2x faster with reduced timber splitting
- Hex 5 recess which delivers excellent grip and torque transfer
- ClimaShield Class 4 coating offering superior corrosion protection
- Clearing thread maximises clamp down
- Ideal for structural landscaping, gates/fences, pergolas, outdoor structural repairs & maintenance
-
- These SuperTEKS® Series 1000 metal screws can be used for fixing into thick steels up to 20mm.
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Class 3 galvanisation provides advanced corrosion protection, ensuring reliable performance and extended service life in exposed conditions.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
- Designed for exterior use, this screw provides strong, reliable fixing into metal with corrosion-resistant coating for long-lasting performance outdoors.
-
- Complies with AS 3566-2002
- T30 Torx compatible drive for positive bit engagement provides maximum application of torque
- Contour head for use when a broad holding power &/or decorative look is required. The underside of the head is flat and ideal for fixing sheet materials or heavier timbers.
-
- Suitable for use with Ramset™ powder actuated tools.
- For fastening to standard strength concrete, masonry and steel up to a maximum of 8mm.
- 1200N/mm2 Shear Strength.
- 1950N/mm2 Shear Strength.
- 52-55HRC Hardness.
-
- Suits 90x90mm, 100x100mm, 115x115mm, 125x125mm and 135x135mm posts.
- Decorative 2 piece post cover half set that clips around existing posts.
- Applies to Australian Standards.
- The post cover is made from a high-grade polymer plastic, therefore does not warp, rot or absorb moisture.
- Made to be painted - simply paint with any outdoor acrylic paint.
-
- Complies with AS 3566-2002
- T25 Torx compatible drive for positive bit engagement provides maximum application of torque
- Countersunk truss head for use where a flush finish is needed e.g. in timber or in a pre-countersunk fitting
-
- Suitable for holding trim, moulding, flooring underlay, upholstery and fabric
- Electro-galvanised coating provides corrosion resistance and increased durability
- 18 gauge size
- 5.7mm crown width, 28mm length
- Made from carbon steel
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- 15° angle
- Hot Dipped Galvanized
- Diamond Point
- Plastic collated
-
- Precision T40 Drive resists cam out
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® drives instantly
-
- For fixing plasterboard/ drywall sheets into timber and light gauge metal surfaces
- Bugle head designed to spin into plasterboard without tearing surface paper
- Sharp self-drilling needle point tip cuts into timber and thin metal up to 1.0mm
- Zinc Gold material with fine thread
- No.2 Phillips Head Drive
-
- Hot-dipped galvanised coating to provide long-term protection.
- Manufactured from 4mm steel.
- 10mm bolt holes for fixing with M10 bolts.
- Used for locating posts onto existing concrete or decking.
-
- Type 17 point features a cutting flute for fast, clean starts in timber, reducing the risk of splitting.
- Class 4 galvanisation offers exceptional long-term corrosion protection, making it ideal for severe external environments and structural applications exposed to weather or coastal conditions.
- The top-lock hex head incorporates an anti-loosening feature that resists vibration, ensuring a secure, maintenance-free hold.
-
- Over 2x Faster*
- Pyramid Point®
- Serrated Sharp Thread
-
- Bolt Down Post Anchors features a knockout 3mm adjustable washer to facilitate adjustment after the bolt holes have been drilled. Used for locating post onto existing concrete or decking
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
-
- Workshop handy pack of assorted Chipboard Screws
- 30 each of 9 different sizes
- Comes in a clear plastic storage case
- Yellow Zinc Plated
- No.2 Phillips Drive / includes bonus driver bit
-
- Suits 112 x 112mm, 125 x 125mm and 135 x 135mm posts
- The kit includes Large FEDTRIM Post Cover and 2 piece galvanised metal support bracket
- The post cover is made from a high-grade polymer plastic, therefore does not warp, rot or absorb moisture.
- Applies to Australian Standards
- Made to be painted with a quality exterior paint
-
- Zinc Silver – For internal applications
- Trivalent Chromium (Cr3+) RoHS Compliant
- Re-sealable Trade PAX bags
