Fasteners & Fixings
Sort Best selling
Showing 36 of 2450 results
-
- Suitable for use with Ramset™ powder actuated tools.
- For fastening to standard strength concrete, masonry and steel up to a maximum of 8mm.
- 1200N/mm2 Shear Strength.
- 1950N/mm2 Shear Strength.
- 52-55HRC Hardness.
-
- Suits 90x90mm, 100x100mm, 115x115mm, 125x125mm and 135x135mm posts.
- Decorative 2 piece post cover half set that clips around existing posts.
- Applies to Australian Standards.
- The post cover is made from a high-grade polymer plastic, therefore does not warp, rot or absorb moisture.
- Made to be painted - simply paint with any outdoor acrylic paint.
-
- Complies with AS 3566-2002
- T25 Torx compatible drive for positive bit engagement provides maximum application of torque
- Countersunk truss head for use where a flush finish is needed e.g. in timber or in a pre-countersunk fitting
-
- Suitable for holding trim, moulding, flooring underlay, upholstery and fabric
- Electro-galvanised coating provides corrosion resistance and increased durability
- 18 gauge size
- 5.7mm crown width, 28mm length
- Made from carbon steel
-
- Conforms to AS3660.1 - 2000, Protection of Buildings from Termites.
- All joints are welded.
- Stem - 25mm diameter x 2.0mm thickness
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- 15° angle
- Hot Dipped Galvanized
- Diamond Point
- Plastic collated
-
- Precision T40 Drive resists cam out
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® drives instantly
-
- For fixing plasterboard/ drywall sheets into timber and light gauge metal surfaces
- Bugle head designed to spin into plasterboard without tearing surface paper
- Sharp self-drilling needle point tip cuts into timber and thin metal up to 1.0mm
- Zinc Gold material with fine thread
- No.2 Phillips Head Drive
-
- Hot-dipped galvanised coating to provide long-term protection.
- Manufactured from 4mm steel.
- 10mm bolt holes for fixing with M10 bolts.
- Used for locating posts onto existing concrete or decking.
-
- Type 17 point features a cutting flute for fast, clean starts in timber, reducing the risk of splitting.
- Class 4 galvanisation offers exceptional long-term corrosion protection, making it ideal for severe external environments and structural applications exposed to weather or coastal conditions.
- The top-lock hex head incorporates an anti-loosening feature that resists vibration, ensuring a secure, maintenance-free hold.
-
- Over 2x Faster*
- Pyramid Point®
- Serrated Sharp Thread
-
- Bolt Down Post Anchors features a knockout 3mm adjustable washer to facilitate adjustment after the bolt holes have been drilled. Used for locating post onto existing concrete or decking
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
-
- Workshop handy pack of assorted Chipboard Screws
- 30 each of 9 different sizes
- Comes in a clear plastic storage case
- Yellow Zinc Plated
- No.2 Phillips Drive / includes bonus driver bit
-
- Suits 112 x 112mm, 125 x 125mm and 135 x 135mm posts
- The kit includes Large FEDTRIM Post Cover and 2 piece galvanised metal support bracket
- The post cover is made from a high-grade polymer plastic, therefore does not warp, rot or absorb moisture.
- Applies to Australian Standards
- Made to be painted with a quality exterior paint
-
- Zinc Silver – For internal applications
- Trivalent Chromium (Cr3+) RoHS Compliant
- Re-sealable Trade PAX bags
-
- Complies with AS 3566-2002
- Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc
- T20 Torx compatible drive for positive bit engagement provides maximum application of torque
-
- Quick and easy installation.
- Effective drill point for easy penetration of plasterboard. Break away drill point to accommodate long screws.
- Low profile head allows for flush fixing. Non-conductive.
- Easy to remove without losing any part of the anchor inside the wall cavity.
- Includes 8g phillips head screws designed to secure fixtures up to 15mm thick
-
- Superior vibration resistance and clamping force
- Lightweight and easy to set
- Good corrosion resistance
- Cost effective
-
- 15° angle
- Hot Dipped Galvanized
- Diamond Point
- Plastic collated
- Ring shank
-
- For fixing metals or thin materials into timber surfaces
- Broad low profile head reduces pull through on thin material
- Sharp self-drilling needle point tip cuts through thin metal up to 1.0mm
- Weatherforce Protective Coating for superior corrosion resistance
- No.2 Phillips Head Drive
-
- Superior vibration resistance and clamping force
- Lightweight and easy to set
- Good corrosion resistance
- Cost effective
-
- 316 Grade Stainless Steel
- Australian Standard AS1275
- Metric Rod - 1.2 Metre Length
- Can be used with standard metric nuts and washers
-
- Suitable for installing non-structural pieces including trim, casing, panelling and moulding
- Electro-galvanised coating provides corrosion resistance and increased durability
- 18 gauge size
- 1.25mm head width, 50mm length
- Made from carbon steel
-
- Complies with AS 3566-2002
- T30 Torx compatible drive for positive bit engagement provides maximum application of torque
- Contour head for use when a broad holding power &/or decorative look is required. The underside of the head is flat and ideal for fixing sheet materials or heavier timbers.
-
- Complies with AS 3566-2002
- Suitable applications may include hardwood to softwood, hardwood decking applications, timber framing, cladding, fencing, builders brackets etc
- T20 Torx compatible drive for positive bit engagement provides maximum application of torque
-
- Full Stirrup Post Anchors are primarily used for bolting to existing concrete
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Black bakelite head
- Zinc plated M10 x 40mm thread
- Five lobes provide better grip allowing a greater level of pressure to be applied.
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Class 4 galvanisation offers exceptional long-term corrosion protection, making it ideal for severe external environments and structural applications exposed to weather or coastal conditions.
- The HiGrip® hex head combines high torque drive with enhanced under-head grip (and compatible sealing washer) to resist sheet creep and maintain clamp force in metal cladding.
- Designed for exterior use, this screw provides strong, reliable fixing into metal with corrosion-resistant coating for long-lasting performance outdoors.
-
- Trade PAX bags
- Zinc Silver - For internal applications
- Trivalent Chromium (Cr3+) RoHS compliant
-
- For fixing plasterboard/ drywall sheets into timber and light gauge metal surfaces
- Bugle head designed to spin into plasterboard without tearing surface paper
- Sharp self-drilling needle point tip cuts into timber and thin metal up to 1.0mm
- Zinc Gold material with fine thread
- No.2 Phillips Head Drive
-
- Strong vibration resistance and clamping force
- Lightweight and easy to set
- Good corrosion resistance
- Cost effective
- Divided container for easy storage
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Strong vibration resistance and clamping force
- Lightweight and easy to use
- Good corrosion resistance
- Cost effective
-
- The 25mm standoff reduces the potential for decay at the post end
- Suits 115mm to 125mm square posts
- Can be cast-in-place or retrofitted with adhesive or mechanical anchors
- All pins and fasteners needed for installation are included
- Manufactured in heavier gauge steel for a stronger connection, finished with ZMAX® Galvanised
-
- Diameter: 18 Gauge / 1.25mm
- Angle: 0°
- Electro galvanised
- Chisel point to reduce timber splitting
