Hollow Wall Anchors
Sort Best selling
Showing 36 of 151 results
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 4-6 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Fast & easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 6 - 9 gauge screws.
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Built in collar prevents loss off anchor in over drilled holes.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 5 - 7 gauge screws.
-
- Quick and easy to install and remove.
- Can be hammered all the way into the hole without pre-expansion.
- The drive screw’s saw tooth thread makes it easy to drive and unscrew.
- A wide, flat collar with collapsible sleeve design, ensures tight fixing.
- Nylon body provides insulation between drive screw and work surface.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 4-6 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Ideal for all types of hollow walls, up to 75mm thick
- Fast and easy installation
- New one strap design for easier insertion and flipping operation
- Superior holding power
- Can be used with any bolt length and requires a half inch hole
-
- Ideal for all types of hollow walls, up to 75mm thick
- Fast and easy installation
- Can be used with any bolt length and requires a half inch hole
- New one strap design for easier insertion and flipping operation
- Superior holding power
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 10 - 14 gauge screws.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 14-16 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Holds up to 30kg on 10mm plasterboard
- Fit in under 20 seconds
- Reusable and recyclable
- Ideal for: curtain rails, blinds and bathroom accessories.
-
- Non conductive nylon body.
- Light Duty
- Easy to use
-
- Wide wingspan for maximum holding power
- Anti-rotation fins prevent spinning in the hole when installing the screw
- Low-profile head allows for flush fixing
- Nylon body is non-conductive
-
- Fast & easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
-
- Easy to install
- Superior holding power
- 2 expandable wings that grip tight behind drywall
- 2 lateral wings hold the anchor in place, preventing any rotation while the screw is inserted
-
- Quick and easy installation. Mini size for limited cavity space
- Effective drill point for easy penetration of plasterboard. Break away drill point accommodates long screws
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
-
- Low profile head allows for low profile fixing
- Large flange prevents the head from pulling into the substrate
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Built in collar prevents loss off anchor in over drilled holes
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Suitable for use with 5 - 7 gauge screws
-
- Anti-rotation barbs prevent the anchor from rotating in the hole
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Light duty
- Suitable for use with 6 - 9 gauge screws
-
- Anti-rotation barbsto prevent the anchor from rotating in the hole
- Countersunk sleeve allows for flush finishing
- Nylon sleeve reduces the effects of cold bridging i.e mould growth, when compared to all-metal anchors
- Suitable for use with 10 - 14 gauge screws
-
- Wide wingspan for maximum holding power.
- Anti-rotation fins prevent spinning in the hole when installing the screw.
- Low-profile head allows for flush fixing.
- Nylon body is non-conductive.
-
- Ideal for all types of hollow walls up to 75mm thick
- Fast and easy installation.
- New one strap design for easier insertion and flipping operation.
- Superior holding power.
- Can be used with any bolt length.
-
- Wide wingspan for maximum holding power.
- Anti-rotation fins prevent spinning in the hole when installing the screw.
- Low-profile head allows for flush fixing.
- Nylon body is non-conductive.
-
- Anti-rotation barbs prevent the anchor from rotating in the hole.
- Nylon sleeve reduces the effects of cold bridging. e.g. mould growth, when compared to all-metal anchors.
- Suitable for use with 14 - 18 gauge screws.
-
- Low profile head allows for low profile fixing.
- Large flange prevents the head from pulling into the substrate.
- Anti-rotation barbs, incorporated in the flange, prevent the anchor from spinning in the hole.
- Collapsing legs with an integral nut provide high strength and allow the screw to be removed without loosing the anchor inside the cavity.
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 4-6 gauge screws.
- Ramset™ wall plugs are available in a handy polybag.
-
- 5mm Tungsten Carbide Drill
- 10 x 35mm White Wall Plugs
- 10 x 35mm 4G Screws
-
- Fast & easy to install
- Self-drilling anchors, no pre-drilling required
- All you need is a screwdriver
- Strong holding power
-
- Holds up to 40kg on 10mm plasterboard
- Fit in under 20 seconds
- Reusable and recyclable
- Ideal for: shelves, shower units, mirrors and wall mounted audio equipment..
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 8-9 gauge screws
- Ramset™ wall plugs are available in a handy polybag
-
- Suits 10 - 13mm plasterboard
- Includes 8mm multipurpose drill bit
- 6 x metal hollow wall anchors
-
- Quick and easy installation
- Effective drill point for easy penetration of plasterboard and softwood studs.
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
-
- Uses gravity and clamping force to anchor light-weight fittings to plasterboard walls.
- Lack of a protruding flange allows for flush fixing.
- Light Duty
-
- Ramset™ wall plugs are tapered at one end for quick and easy insertion
- Suitable for 10-12 gauge screws.
- Ramset™ wall plugs are available in a neat and convenient frame pack.
-
- Quick and easy installation
- Effective drill point for easy penetration of plasterboard. Break away drill point accommodates long screws
- Low profile head allows for flush fixing
- Easy to remove without losing any part of the anchor inside the wall cavity
- Installs with a basic #2 Phillips head screw driver
