Fasteners & Fixings
Sort Best selling
Showing 36 of 2449 results
-
Simpson Strong-TieSimpson Strong-Tie 10 x 42mm Galvanized Timber to Steel Collated Quik Drive Screw - 500 Pack
- Drill Point with wings drives easily through 1.2mm–2.4mm steel without pre-drilling
- Ribbed Flat Head with Nibs for countersunk finish
- Winged design avoids sheet ride
- Recommended steel thickness 1.2mm–3mm CBSDGL Series
- All screw packs include a standard Quik Drive® bit. Replacement Project Pro bits can be purchased separately.
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Top Grip provides a positive seal and reduces the roof sheet riding down
- Thread-to-point technology for faster starting, no skidding and stable installation
- Vortex Point for fastening to timber or metal up to 1.5mm
-
- Good corrosion protection
- Used for non-structural work
- Can be used for shade cloth and plastic trellis'
- External use
- Clouts
-
- These SuperTEKS® Series 500 metal screws can be used for fixing into thick steels up to 12mm.
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Class 3 galvanisation provides advanced corrosion protection, ensuring reliable performance and extended service life in exposed conditions.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
- Designed for exterior use, this screw provides strong, reliable fixing into metal with corrosion-resistant coating for long-lasting performance outdoors.
-
- Diameter: 16 Gauge / 1.6mm
- Angle: 0°
- Electro galvanized
- Chisel point to reduce timber splitting
-
- General purpose timber to timber use
- Plain shank
- Internal use
- Bullet Head
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Top Grip provides a positive seal and reduces the roof sheet riding down
- Type 17 Point for drilling into timber while ensuring maximum pullout strength and a high strip torque
- For fastening into timber (softwood and hardwood)
-
- Fully compliant to bracing requirements of AS1684.2 and AS1684.3 for residential timber framed construction
- Strong galvanised steel
- Pre-punched holes for ease of installation
- Slim design without need to recess into the timber
-
- Fully compliant to bracing requirements of AS1684.2 and AS1684.3 for residential timber framed construction
- Strong galvanised steel
- Pre-punched holes for ease of installation
- Slim design without need to recess into the timber
-
- Precision T40 Drive resists cam out and provides greater control
- Bugle Head embeds cleanly for a flush finish
- Robust 14g construction for strong performance and durability
- For fastening into metal up to 5mm
- Free Bit Included
-
- Good corrosion protection
- Used for non-structural work
- Can be used for shade cloth and plastic trellis'
- External use
- Clouts
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Top Grip provides a positive seal and reduces the roof sheet riding down
- Type 17 Point for drilling into timber while ensuring maximum pullout strength and a high strip torque
- For fastening into timber (softwood and hardwood)
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Class 4 galvanisation offers exceptional long-term corrosion protection, making it ideal for severe external environments and structural applications exposed to weather or coastal conditions.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
- Designed for exterior use, this screw provides strong, reliable fixing into metal with corrosion-resistant coating for long-lasting performance outdoors.
-
- Multipurpose packers/spacers for windows, doors and other leveling solutions.
- UV Stable and will not expand or shrink
- High compressive strenghth (capacity up to 5 tonnes)
- Manufactured using Durable high quality plastic
- Bevelled leg end for easy installation
-
- Use in plywood sheets or soft linings like cabinetwork
- Zinc plated
- Internal use
-
- Designed and tested to conform to Australia's stringent Brick Tie Code AS2699
- Australian made.
- Light Duty: To suit 50mm cavity between brickwork and timber or steel frame.
- Manufactured to conform to a corrosion resistance for R4 for use in coastal or industrial areas as required in AS2699 & AS3700.
- Supplied with 3.2 x 40mm wood weld nails.
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Class 4 galvanisation offers exceptional long-term corrosion protection, making it ideal for severe external environments and structural applications exposed to weather or coastal conditions.
- The HiGrip® hex head combines high torque drive with enhanced under-head grip (and compatible sealing washer) to resist sheet creep and maintain clamp force in metal cladding.
- Designed for exterior use, this screw provides strong, reliable fixing into metal with corrosion-resistant coating for long-lasting performance outdoors.
-
- Dual Type-17 tip delivers strong self-drilling performance in both timber and thin metal. It pierces timber up to 2x faster with reduced timber splitting.
- Gold passivation adds a durable protective layer over zinc plating, enhancing corrosion resistance while providing a clean, distinctive finish that improves visibility and surface durability.
- The gently tapered bugle head spreads load over a wider area, reducing surface damage and pull-through for a smooth, flush finish.
- Reliable fixing into timber with strong grip and smooth drive for professional results.
-
- 34° angle
- 90mm x 3.15mm
- Bright Steel
- Smooth shank & Diamond point
- Box of 1000 nails
-
- Longer life of the fastener, longer life of the project
- 50% stronger than 10G equivalent. Coarser thread makes it even faster to install.
- No pre-drilling. Fast Bite Point for a quick start.
-
- Stamped Screw Head - For easy identification and certification
- Wide Thread - High resistance to withdrawal
- Large Diameter Head - Superior hold down strength
- Slotted Tip - For quicker start, reduced splitting & reduced driving force
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- Top Grip provides a positive seal and reduces the roof sheet riding down
- Shank Protector enlarges the hole cut into the roof sheet sufficiently to minimise abrasion of the coating
- Thread-to-point technology for faster starting, no skidding and stable installation
- Vortex Point for fastening to timber or metal up to 1.5mm
-
- Type 17 point features a cutting flute for fast, clean starts in timber, reducing the risk of splitting.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
- Reliable fixing into timber with strong grip and smooth drive for professional results.
-
- Available with pre-assembled washers to improve pullover strength.
- Manufactured from high-strength material to avoid breakage.
- Available with either a plain or striated shank, and in a range of different sizes and head styles
-
- Patented SawTooth point for faster starts, less torque and no pre-drilling
- Bold thread design provides superior holding power, even into the end grain of timber
- Large washer-head provides superior clamping, while nibs offer greater control for the installer when seating the head
- 6-lobe Torx T-40 drive eliminates camouts, for easier installations and longer bit life, bit(s) included
- Double barrier coating, suitable for interior, treated timber and external applications
-
- Retrofittable, made of 2 parts that can be fixed after services have been installed
- Adjustable, ability to use on both the top and bottom of the wall plate where required
- Strong enough to reinforce holes anywhere along the top plate
- Minimises the cost of rework
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Designed for exterior use, this screw provides strong, reliable fixing into metal with corrosion-resistant coating for long-lasting performance outdoors.
- The low-profile button head provides a smooth, finished appearance while distributing load over a wider area, ideal for applications where clearance and aesthetics are important.
-
BremickBremick Collated Screw 6g x 25mm Zinc Yellow -Plasterboard Screw Metal Drill Point -1000pack
- Suitable for fastening plasterboard to metal (0.8 to 2.5mm thick)
- Drill point, Phillips #2 drive, 18 threads per inch
- Zinc yellow finish for moderate corrosion protection
- Bugle head design provides a flush finish
- Complies with AS3566/NZ3604
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Shank Protector enlarges the hole cut into the roof sheet sufficiently to minimise abrasion of the coating
- Type 17 Point for drilling into timber while ensuring maximum pullout strength and a high strip torque
- For fastening into timber (softwood and hardwood)
-
- Ultimate corrosion protection
- Ideal for use in walls and fences
- External use
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- Fine Thread for greater stronger holding strength and resistance to pull-out in thin or soft metals
- High quality point ensures fast and reliable drilling into metal
- SDM Point for drilling into steel while ensuring maximum pullout strength and a high strip torque
- For fastening to metal up to 4mm
-
- Precision T40 Drive resists cam out
- Large Washer Head for greater clamping force
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® provides an instant drive
- Free Bit Included
-
- Dual Type 17 Tip that pierces timber up to 2x faster with reduced timber splitting
- Hex 5 recess which delivers excellent grip and torque transfer
- ClimaShield Class 4 coating offering superior corrosion protection
- Clearing thread maximises clamp down
- Ideal for structural landscaping, gates/fences, pergolas, outdoor structural repairs & maintenance
-
- 20mm Builders/Construction heavy duty Shim
- No slip design with small raised ribs to prevent Shim movement
- High compressive strenghth (capacity up to 20 tonnes)
- UV stable and manufactured using Durable high quality plastic
- Multiple sizes available across the Titan Shim range (1, 2, 3, 5, 10, 20mm)
-
- Over 2x Faster*
- Serrated Sharp Thread
- Pyramid Point®
-
- 316 Grade Stainless Steel
- Australian Standard AS1275
- Metric Rod - 1.2 Metre Length
- Can be used with standard metric nuts and washers
