Fasteners & Fixings
Sort Best selling
Showing 36 of 2449 results
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Top Grip provides a positive seal and reduces the roof sheet riding down
- SDM Point for drilling into steel while ensuring maximum pullout strength and a high strip torque
- For fastening into metal up to 5mm
-
- 15° angle
- Hot Dipped Galvanized
- Diamond Point
- Plastic collated
- Ring shank
-
- Full Stirrup Post Anchors are primarily used for bolting to existing concrete
- Convenient hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm
- Hot dipped galvanised coating after manufacture, to provide long term protection, suitable for severe external environments which includes sites within 1km from the coast
- Stems in stirrups are sealed for termite protection - AS1397-2001
- Stirrup thickness = 4mm
-
TITAN FASTENERSTitan 50 x 2.5mm Hot Dipped Galvanised Collated Coil Nail Screw Dome Ring - 1600 Pack
- 15° angle
- Hot dipped galvanised
- Diamond point
- Plastic collated
- Screw Shank
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Top Grip provides a positive seal and reduces the roof sheet riding down
- SDM Point for drilling into steel while ensuring maximum pullout strength and a high strip torque
- For fastening into metal up to 5mm
-
- Simplifies installation of mouldings in steel frame houses with no fiddly gluing or screwing
- Steel Frame Brad holds stronger in steel than a 16 gauge C brad in timber frames
- Round shank, conical point and specially formulated resin for extra hold in steel
-
- 2mm Builders/Construction heavy duty Shim
- No slip design with small raised ribs to prevent Shim movement
- High compressive strenghth (capacity up to 20 tonnes)
- UV stable and manufactured using Durable high quality plastic
- Multiple sizes available across the Titan Shim range (1, 2, 3, 5, 10, 20mm)
-
- Repair and reinforce 75mm fence posts easily and economically.
- Suitable for posts installed in concrete or dirt
- Reinforces weakened posts without having to replace the post or concrete
- Installed individually or in pairs (sold individually)
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- Fine Thread for greater stronger holding strength and resistance to pull-out in thin or soft metals
- High quality point ensures fast and reliable drilling into metal
- SDM Point for drilling into steel while ensuring maximum pullout strength and a high strip torque
- For fastening to metal up to 4mm
-
- Simplifies installation of mouldings in steel frame houses with no fiddly gluing or screwing
- Steel Frame Brad holds stronger in steel than a 16 gauge C brad in timber frames
- Round shank, conical point and specially formulated resin for extra hold in steel
-
Bremick UltraFastBremick Ultrafast 10g x 65mm Stainless Steel 304 Black Trim Head Decking screw -500 Pack
- Precision T20 Drive resists cam out
- Trim Head provides a small and discreet finish
- SharksTooth® Thread for smoother installation
- Spear Point eliminates timber splitting*
- Free Bit Included
-
- Crown Width: 12.8mm
- Wire Diameter: 15 Gauge / 1.70mm
- Wire Length: 38mm
- Electro Galvanised
-
- Fully compliant to bracing requirements of AS1684.2 and AS1684.3 for residential timber framed construction
- Strong galvanised steel
- Pre-punched holes for ease of installation
- Slim design without need to recess into the timber
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Full Threaded for a strong connection
- Type 17 Point for drilling into timber while ensuring maximum pullout strength and a high strip torque
- For fastening into timber (softwood and hardwood)
-
- ZIP® point drives fast and seats flush, pulling the head tight for a neat, professional finish without surface damage.
- Versatile design for strong, reliable fixing into both metal and timber, ideal for mixed-material applications.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
-
- Patented SawTooth point for faster starts, less torque and no pre-drilling
- Bold thread design provides superior holding power, even into the end grain of timber
- Large washer-head provides superior clamping, while nibs offer greater control for the installer when seating the head
- 6-lobe Torx T-40 drive eliminates camouts, for easier installations and longer bit life, bit(s) included
- Double barrier coating, suitable for interior, treated timber and external applications
-
- Designed specifically for Decking applications
- Countersunk Wide head providing strong hold and flush finish
- Weather Force corrossion protection
- T25 Drive (Bit included) with Type 17 Point for quick clean installation
- Suitabel for both Soft and Hardwood varieties
-
- Precision T40 Drive resists cam out
- Large Washer Head for greater clamping force
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® provides an instant drive
-
Simpson Strong-TieSimpson Strong-Tie 3.32 x 38mm SCN Smooth Shank Collated Connector Nail - 500 Pack
- Orange-dipped nail tips provide easy nail to connector hole alignment
- Full round smooth head with stamp for easy nail identification
- Smooth shank makes for easier driving
- Diamond point provides lower driving resistance
- Hot-dip galvanised (HDG). 22 nails per paper-collated strip
-
- Diameter: 16 Gauge / 1.6mm
- Angle: 0°
- Electro galvanized
- Chisel point to reduce timber splitting
-
- Crown Width: 12.8mm
- Wire Diameter: 15 Gauge / 1.70mm
- Wire Length: 50mm
- Electro Galvanised
-
- Diameter: 18 Gauge / 1.25mm
- Angle: 0°
- Electro galvanized
- Chisel point to reduce timber splitting
-
- ZMAX galvanised with black powder coat
- The Outdoor Accents hangers connect 45 mm joists to beams
- The Outdoor Accents Concealed Hanger is compatible with Joist up to 290mm in Height.
- The concealed hangers feature straight edges and provide a cleaner-looking installation for joist connections
- Hangers install easily with the Outdoor Accents connector screw.
-
- Repair and reinforce 90mm x 90mm timber fence posts easily and economically
- Suitable for posts installed in both concrete or dirt
- Reinforces weakened posts without having to replace the post or concrete
- Installed in pairs (sold individually)
- A short term solution to fence post repair, the R-Z Mender will have your fence straight and stable in a matter of minutes
-
- Hex Drive provides traceability and offers greater engagement and hex socket stability
- High Quality EPDM seal for a watertight connection
- Full Threaded for a strong connection
- Thread-to-point technology for faster starting, no skidding and stable installation
- Vortex Point for fastening to timber or metal up to 1.5mm
-
- Diameter: 14 Gauge / 2mm
- Angle: 0°
- AISI 304 grade stainless steel
- Chisel point to reduce timber splitting
-
- Dual Type 17 Tip that pierces timber up to 2x faster with reduced timber splitting
- Hex 5 recess which delivers excellent grip and torque transfer
- ClimaShield Class 4 coating offering superior corrosion protection
- Clearing thread maximises clamp down
- Ideal for structural landscaping, gates/fences, pergolas, outdoor structural repairs & maintenance
-
Simpson Strong-TieSimpson Strong-Tie 3.75 x 38mm SCN Smooth Shank Collated Connector Nail - 500 Pack
- Orange-dipped nail tips provide easy nail to connector hole alignment
- Full round smooth head with stamp for easy nail identification
- Smooth shank makes for easier driving
- Diamond point provides lower driving resistance
- Hot-dip galvanised (HDG). 22 nails per paper-collated strip
-
- Zenith trusted quality at competitive prices
- Internal use
- Easy to use
-
- Designed and tested to conform to Australia's stringent Brick Tie Code AS2699
- Australian made.
- Medium Duty: To suit 50mm cavity between brickwork and timber or steel frame.
- R Rating R2
- Supplied with 4.5 x 30mm screws.
-
- Designed specifically for Decking applications
- Countersunk Wide Bugle head providing strong hold and flush finish
- 304 Stainless Steel
- 4mm Hex Drive (Bit included) head with Type 17 Point for quick clean installation
- Suitabel for both Soft and Hardwood varieties
-
- Suitable for fastening non compressed fibre cement to timber and thin steel
- Needle point, Phillips #2 drive, 15 threads per inch
- Galvanised Class 3
- Countersunk Ribbed Head provides a flush finish
- Complies with AS3566/NZ3604
-
- TEKS® self-drilling tip cuts through metal easily, saving time by eliminating the need for pre-drilling.
- Class 4 galvanisation offers exceptional long-term corrosion protection, making it ideal for severe external environments and structural applications exposed to weather or coastal conditions.
- The hex head design allows higher torque transfer, ensuring secure tightening and easy installation using standard wrenches or sockets.
- Designed for exterior use, this screw provides strong, reliable fixing into metal with corrosion-resistant coating for long-lasting performance outdoors.
-
- Zenith trusted quality at competitive prices
- Internal use
- Easy to use
-
- 1mm Builders/Construction heavy duty Shim
- No slip design with small raised ribs to prevent Shim movement
- High compressive strenghth (capacity up to 20 tonnes)
- UV stable and manufactured using Durable high quality plastic
- Multiple sizes available across the Titan Shim range (1, 2, 3, 5, 10, 20mm)
-
- Suitable for holding trim, moulding, flooring underlay, upholstery and fabric
- Electro-galvanised coating provides corrosion resistance and increased durability
- 18 gauge size
- 5.7mm crown width
- Made from carbon steel
