Fasteners & Fixings
Sort Best selling
Showing 36 of 2449 results
-
- Precision T40 Drive resists cam out
- Serrated Sharp Thread cuts timber fibres
- Pyramid Point® drives instantly
-
- For fixing polycarbonate or fibreglass roof sheets into timber and light gauge metal roof battens
- Flexible EPDM rubber washer fits to contours of the polycarbonate sheet
- Sharp self-drilling Type17 tip cuts into timber and thin metal up to 0.75mm
- Galvanised coating for Class 3 corrosion protection
- Hex head for easy installation with a 5/16” socket
-
- Longer life of the fastener, longer life of the project
- 50% stronger than 10G equivalent. Coarser thread makes it even faster to install.
- No pre-drilling. Fast Bite Point for a quick start.
-
- 15° angle
- Electro galvanized
- Diamond Point
- Plastic collated
- Flat head
-
- Phillips drive
- Self drill
- Specifically designed for use in chipboard/particle board/MDF such as used for cabinets and furniture
- Chipboard Screws Countersunk Rib Head
-
- Gold passivated steel finish for internal use only.
- Needle point tip easily pierces the chipboard .
- Countersunk ribbed head leads to a flush finish and efficient application without ripping the chipboard.
- Features deeper thread that provides for better grip and a long lasting fixing.
-
- Gold passivated steel finish for internal use only.
- Needle point tip easily pierces the chipboard .
- Countersunk ribbed head leads to a flush finish and efficient application without ripping the chipboard.
-
- Bright
- Smooth shank
- 3000 nails per box
-
- General purpose timber to timber use
- Plain shank
- Internal use
- Bullet Head
-
- 34° angle
- 90mm x 3.15mm
- Bright Steel
- Smooth shank and Diamond point
- Box of 3000 nails
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Unique "pull-down" section
- Stainless steel grade 316
-
- Patented 'pull-down' expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled 'through fixture' anchor eliminates marking out and re-positioning of fixtures
- Galvanised steel
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Features unique "pull-down" section
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Manufactured in Australia
- G300 minimum steel grade
- Z275 minimum corrosion protection
-
- Ultimate corrosion protection
- Specially designed thread
- Landscaping and decking spikes
- External use
-
- Manufactured in Australia
- G300 Minimum steel grade
- Z275 minimum corrosion protection
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Countersunk head provides a neat flush finish
-
- Manufactured in Australia
- 3 holes including 1 in centre
- Z275 minimum corrosion protection
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- AS1684 & AS1720 Compliant
- The Pryda range of hangers provides for most common timber: sizes, glued laminated beams, I-joists, and trusses
- Manufactured in Australia, these hangers have been designed to achieve high design loads taking account of the results of laboratory testing at Monash University in Melbourne
- Can be fastened using Pryda Nails or Pryda 35mm Screws
-
- Patented 'pull-down' expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled 'through fixture' anchor eliminates marking out and re-positioning of fixtures
- Trusted Ramset quality
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Unique "pull-down" section
-
- Suitable for framing application in accordance with AS1684.2 and AS1684.3
- 316 Stainless Steel – durable, corrosion resistant, and suitable for use in coastal or high corrosion environments
- Versatile bracket – simply bend to your needs!
- Australian Made - High quality, peace of mind, and supporting Aussie jobs
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Pre-punched nails
- Suitable for all timbers, from the lightest softwoods to the densest hardwoods
- Designed for fast construction jointing of timber frames using a hammer
-
- Use for right angle joints, carport, deck, fence or pergola construction
- Suitable for use as either left or right hand and either the vertical or horizontal position
- Galvanised bracket for right angle joints
- The use of galvanised Pryda Timber Connector Nails 35 x 3.15mm is recommended
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Use for repair or reinforcement, timber jointing or wall frame to frame connections
- No special pressing equipment is necessary for installation
- Made from Galvabond® sheet steel for high resistance to corrosion
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
-
- Use for timber jointing, framing repair or reinforcement
- Use as a heavy duty timber connection where a Knuckle Nailplate will not suffice
- Made from Galvabond® sheet steel for high resistance to corrosion
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security.
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures.
- Countersunk head provides a neat flush finish.
-
- Quick and easy to install
- Made from Galvabond® sheet steel for high resistance to corrosion
- Satisfies the minimum specification of clause 1.15 of AS1684 part 2 and 3, and clause 1.14 of AS1684.4.
-
- Patented "pull-down" expansion sleeve closes gaps of up to 5mm providing enhanced security
- Fully assembled "through fixture" anchor eliminates marking out and re-positioning of fixtures
- Countersunk head provides a neat flush finish.
-
- Patented WERCS thread reduces jamming making installation easier
- New thread pitch increases clamping force for greater security
- Lower thread height at the tip makes starting easier
- 100% removable
- Ideal for close-to-edge or close-to-anchor installation
